Membrane and Water Treatment

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Improved adsorption performance of heavy metals by surface modification of polypropylene/polyethylene media through oxygen plasma and acrylic acid

  • Hong, Jeongmin (Department of Environmental Engineering, Seoul National University of Science and Technology) ;
  • Lee, Seungwoo (Department of Fine Chemistry, Seoul National University of Science and Technology) ;
  • Ko, Dongah (Innovation Centre Denmark) ;
  • Gwon, Eunmi (ECOSTAR Co., Ltd.) ;
  • Hwang, Yuhoon (Department of Environmental Engineering, Seoul National University of Science and Technology)
  • Received : 2019.11.08
  • Accepted : 2020.01.27
  • Published : 2020.05.25
⟨ Previous Next ⟩

Abstract

Industrialization and modern developments have led to an influx of toxic heavy metals into the aquatic environment, and the accumulation of heavy metals has serious adverse effects on humans. Among the various heavy metal treatment methods, adsorption is very useful and frequently used. Plastic materials, such as polypropylene and polyethylene, have been widely used as filter media due to their mechanical and chemical stability. However, the surface of plastic material is inert and therefore the adsorption capability of heavy metals is very limited. In this study, granular media and fiber media composed of polypropylene and polyethylene are used, and the surface modification was conducted in order to increase adsorption capability toward heavy metals. Oxygen plasma generated hydroxyl groups on the surface of the media to activate the surface, and then acrylic acid was synthesized on the surface. The grafted carboxyl group was confirmed by FT-IR and SEM. Heavy metal adsorption capability of pristine and surface modified adsorbents was also evaluated. Overall, heavy metal adsorption capability was increased by surface modification due to electrostatic interaction between the carboxyl groups and heavy metal ions. Fibrous PP/PE showed lower improvement compared to granular PP media because pore blockage occurred by the surface modification step, thereby inhibiting mass transfer.

Keywords

Acknowledgement

The present study was funded by the Seoul Green Environment Center (SGEC) in South Korea.

References

  1. Atieh, M. A., Bakather, O. Y., Tawabini, B., Al-Tawbini, B., Bukhari, A. A., Abuilaiwi, F. A., et al. (2010), "Effect of carboxylic functional group functionalized on carbon nanotubes surface on the removal of lead from water", Bioinorg. Chem. Appl., 603978. http://dx.doi.org/10.1155/2010/603978.
  2. Bohli, T., Ouederni, A. and VillaescU.S.A., I. (2017), "Simultaneous adsorption behavior of heavy metals onto microporous olive stones activated carbon: Analysis of metal interactions", Euro-Mediterr. J. Environ. Integr., 2(1), 19. https://doi.org/10.1007/s41207-017-0030-0.
  3. Genc-Fuhrman, H., Mikkelsen, P.S. and Ledin, A. (2007), "Simultaneous removal of As, Cd, Cr, Cu, Ni and Zn from stormwater: experimental comparison of 11 different sorbents", Water Res., 41, 591-602. https://doi.org/10.1016/j.watres.2006.10.024.
  4. Go, Y.S., Seo, Y.G., Lee, P.E., Hwang, Y., Kim, B. and Lee, T.J. (2019), "Pollutant removals according to media type at the filtration unit with the circulation of suspended media", J. Korean Soc. Environ. Eng., 41(5), 257-264. https://doi.org/10.4491/KSEE.2019.41.5.257.
  5. Jawed, A., Saxena, V. and Pandey, L.M. (2020), "Engineered nanomaterials and their surface functionalization for the removal of heavy metals: A review", J. Water Process Eng., 33, 101009. https://doi.org/10.1016/j.jwpe.2019.101009.
  6. Ko, D., Lee, J.S., Patel, H.A., Jakobsen, M.H., Hwang, Y., Yavuz, C.T., Hansen, H.C.B and Andersen, H.R. (2017), "Selective removal of heavy metal ions by disulfide linked polymer networks", J. Hazard. Mater., 332, 140-148. https://doi.org/10.1016/j.jhazmat.2017.03.007.
  7. Lei, J., Gao, J., Zhou, R., Zhang, B. and Wang, J. (2000), "Photografting of acrylic acid on high density polyethylene powder in vapour phase", Polym. Int., 49(11), 1492-1495. https://doi.org/10.1002/1097-0126(200011)49:11<1492::AID-PI538>3.0.CO;2-Q.
  8. Lenz, M. and Lens, P.N.L. (2009), "The essential toxin: The changing perception of selenium in environmental sciences", Sci. Tot. Environ., 407, 3620-3633. https://doi.org/10.1016/j.scitotenv.2008.07.056.
  9. Lim, J.H., Stolzenbach, K.D. and Schiff, K.C. (2005), "Contribution of trace metals from atmospheric deposition to stormwater runoff in a small impervious urban catchment", Water Res., 39, 3929-3937. https://doi.org/10.1016/j.watres.2005.07.003.
  10. MoU.S.A.vi, S.J., Parvini, M. and Ghorbani, M. (2018), "Adsorption of heavy metals (Cu2+ and Zn2+) on novel bifunctional ordered mesoporous silica: Optimization by response surface methodology", J. Taiwan Inst. Chem. E., 84, 123-141. https://doi.org/10.1016/j.jtice.2018.01.010.
  11. Sharma, S., Tiwari, S., Hasan, A., Saxena, V. and Pandey, L.M. (2018), "Recent advances in conventional and contemporary methods for remediation of heavy metal-contaminated soils", 3 Biotech., 8(4), 216. https://doi.org/10.1007/s13205-018-1237-8.
  12. Siriwardene, N.R., Deletic, A. and Fletcher, T.D. (2007), "Clogging of stormwater gravel infiltration systems and filters: Insights from a laboratory study", Water Res., 41, 1433-1440. https://doi.org/10.1016/j.watres.2006.12.040.
  13. Smuleac, V., Bachas, L. and Bhattacharyya, D. (2010), "Aqueous-phase synthesis of PAA in PVDF membrane pores for nanoparticle synthesis and dichlorobiphenyl degradation", J. Membrane Sci., 346(2), 310-317. https://doi.org/10.1016/j.memsci.2009.09.052.
  14. Wang, H. (2006), "Improving the adhesion of polyethylene by UV grafting", J. Adhes., 82(7), 731-745. https://doi.org/10.1080/00218460600775815.
  15. Wang, L.K., Hung, Y. and Shammas, N.K. (2005), Physicochemical Treatment Processes, Volume 3, Humana Press, New Delhi, India.
  16. Wi, H., Kim, H., Oh, D., Bae, S. and Hwang, Y. (2019), "Surface modification of poly(vinyl alcohol) sponge by acrylic acid to immobilize prussian blue for selective adsorption of aqueous cesium", Chemosphere, 226, 173-182. https://doi.org/10.1016/j.chemosphere.2019.03.101.
  17. Yamada, K., Tachi, M. and Kimura, Y. (2018), "Improvement of adhesive strength of poly (tetrafluoroethylene) plates through oxygen plasma treatment and subsequent photografting of methacrylic acid", Int. J. Mater. Sci. Appl., 7(1), 18. https://doi.org/10.11648/j.ijmsa.20180701.14.
  18. Yang, S.H., Lee, M.J., Gwon, E.M. and Lee, J. (2016), "Analysis of characteristic of filtration pilot plant for combined sewer overflows treatment", J. Korean Soc. Urban Environ., 16(5), 503-509.
  19. Zhao, G., Li, J., Ren, X., Chen, C. and Wang, X. (2011), "Few-layered graphene oxide nanosheets as superior sorbents for heavy metal ion pollution management", Environ. Sci. Technol., 45(24), 10454-10462. https://doi.org/10.1021/es203439v.