DOI QR코드

DOI QR Code

티타늄 합금의 표면 처리에 있어 표면 거칠기에 대한 레이저 유도 플라즈마 분광분석법 측정 적용 연구

Laser-Induced Plasma Spectroscopy Measurement on Surface Roughness in Surface Treatment of Titanium Alloys

  • 김지훈 (서울과학기술대학교 기계공학과) ;
  • 김주한 (서울과학기술대학교 기계공학과)
  • Kim, Ji-Hun (Department of Mechanical Engineering, Seoul National University of Science and Technology) ;
  • Kim, Joohan (Department of Mechanical Engineering, Seoul National University of Science and Technology)
  • 투고 : 2019.11.21
  • 심사 : 2019.12.21
  • 발행 : 2020.02.29

초록

In this study, the surface changes of titanium alloy using laser surface treatment and the surface analysis using laser-induced plasma spectroscopy were carried out. The laser surface treatment induced changes in surface roughness and the diffusion of atmospheric elements. Excessive melting or less melting caused roughness changes, but when moderate levels of energy were applied, a smoother surface could be obtained than the initial surface. In the process, the diffusion of atmospheric elements took place. To analyze the diffusion of atmospheric elements with respect to surface morphology, the surfaces were re-shaped with grinding. In this experimental conditions, the effect of plasma formation by surface roughness was identified. Compensated plasma signals for the material properties were obtained and analysed by removing the background plasma signal.

키워드

참고문헌

  1. Jung, D. H., Kim, H. J., "A Study on Surface Characteristics of High Tensile Brass with Molybdenum Flame Spray Treatment," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 6, pp. 38-45, 2018. https://doi.org/10.14775/ksmpe.2018.17.6.038
  2. Park, S. G., Kim, C. S., "Optimal Double Heat Treatment Process ro Improved the Mechanical Properties of Lightweight AlSiCu Alloy," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 1, No. 3, pp. 102-108, 2018. https://doi.org/10.14775/ksmpe.2018.17.3.102
  3. Xu, J., Yu, C., Lu, H., Wang, Y., Luo, C., Xu, G., & Suo, J., "Effects of alloying elements and heat treatment on hydrogen diffusion in SCRAM steels," Journal of Nuclear Materials, Vol, 516, pp. 135-143, 2019. https://doi.org/10.1016/j.jnucmat.2019.01.019
  4. Zhou, Z., Perez-Wurfl, I., & Simonds, B. J., "Rapid, deep dopant diffusion in crystalline silicon by laser-induced surface melting," Materials Science in Semiconductor Processing, Vol. 86, pp. 8-17, 2018. https://doi.org/10.1016/j.mssp.2018.06.012
  5. Mosbacher, M., Scherm, F., & Glatzel, U., "Oxygen diffusion kinetics of an advanced three step heat treatment for zirconium alloy ZrNb7," Surface and Coatings Technology, Vol. 339, pp. 139-146, 2018. https://doi.org/10.1016/j.surfcoat.2018.02.015
  6. Kim, H. S., Kim, J. H., "A Study of Mechanical Property of SM53C Steel by High Frequency Induction Hardening," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 6, pp. 7-15, 2010.
  7. Jolivet, L., Leprince, M., Moncayo, S., Sorbier, L., Lienemann, C. P., & Motto-Ros, V., "Review of the recent advances and applications of LIBS-based imaging," Spectrochimica Acta Part B: Atomic Spectroscopy, Vol. 151, pp. 41-53, 2018.
  8. Rapin, W., Bousquet, B., Lasue, J., Meslin, P. Y., Lacour, J. L., Fabre, C., & Gasnault, O., "Roughness effects on the hydrogen signal in laser-induced breakdown spectroscopy," Spectrochimica Acta Part B: Atomic Spectroscopy, Vol. 137, pp. 13-22, 2017. https://doi.org/10.1016/j.sab.2017.09.003
  9. ElFaham, M. M., Alnozahy, A. M., & Ashmawy, A., "Comparative study of LIBS and mechanically evaluated hardness of graphite/rubber composites," Materials Chemistry and Physics, Vol. 207, pp. 30-35, 2018. https://doi.org/10.1016/j.matchemphys.2017.12.036
  10. Aberkane, S. M., Bendib, A., Yahiaoui, K., Abdelli-Messaci, S., Amara, S. E., & Harith, M. A., "Effect of laser wavelength on the correlation between plasma temperature and surface hardness of Fe-V-C metallic alloys," Spectrochimica Acta Part B: Atomic Spectroscopy, Vol. 113, pp. 147-151, 2015. https://doi.org/10.1016/j.sab.2015.09.012
  11. Li, Y., Ke, C., Liu, X., Gou, F., Duan, X., & Zhao, Y., "Analysis liquid lithium corrosion resistance of Er2O3 coating revealed by LIBS technique," Fusion Engineering and Design, Vol. 136, pp. 1640-1646, 2018. https://doi.org/10.1016/j.fusengdes.2018.07.001
  12. Ararat-Ibarguen, C., Perez, R. A., & Iribarren, M., "Measurements of diffusion coefficients in solids by means of LIBS combined with direct sectioning," Measurement, Vol. 55, pp. 571-580, 2014. https://doi.org/10.1016/j.measurement.2014.06.009
  13. Ararat-Ibarguen, C., Corvalan, C., Di Lalla, N., Iribarren, M., Perez, R., & Vicente, E., "Application of the LIBS Technique to the Study of Fast Impurities Diffusion in Zr Based Alloys," Procedia Materials Science, Vol. 8, pp. 1004-1013, 2015. https://doi.org/10.1016/j.mspro.2015.04.162
  14. Lopea-Quintas I., Pinon V., Mateo M. P., Nicolas G., "Effect of surface topography in the generation of chemical maps by laser-induced plasma spectroscopy," Aplied Surface Science, Vol. 258, pp. 9432-9436, 2012. https://doi.org/10.1016/j.apsusc.2012.04.026
  15. Antonczak, A. J., Trzcinski, M., Hiller, T., Bukaluk, A., & Wronkowska, A. A., "Optical properties of laser induced oxynitride films on titanium," Applied Surface Science, Vol. 304, pp. 107-114, 2014. https://doi.org/10.1016/j.apsusc.2014.01.047
  16. Antonczak, A. J., Skowronski, L., Trzcinski, M., Kinzhybalo, V. V., Lazarek, L. K., & Abramski, K. M., "Laser-induced oxidation of titanium substrate: Analysis of the physicochemical structure of the surface and sub-surface layers," Applied Surface Science, Vol. 325, pp. 217-226, 2015. https://doi.org/10.1016/j.apsusc.2014.11.062
  17. Kim, K. W., Kim, S. H., Cho, H, Y., "Study on pulsed-laser polishing in surface of NAK80 die steel," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 136-141, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.136
  18. Ukar, E., Lamikiz, A., Liebana, F., Martinez, S., & Tabernero, I., "An industrial approach of laser polishing with different laser sources: Industrielle Methode zum Laserpolieren mit verschiedenen Laserstrahlquellen," Materialwissenschaft und Werkstofftechnik, Vol. 46, No. 7, pp. 661-667, 2015. https://doi.org/10.1002/mawe.201500324
  19. Wang, Q., Morrow, J. D., Ma, C., Duffie, N. A., & Pfefferkorn, F. E., "Surface prediction model for thermocapillary regime pulsed laser micro polishing of metals," Journal of Manufacturing Processes, Vol. 20, pp. 340-348, 2015. https://doi.org/10.1016/j.jmapro.2015.05.005
  20. Pfefferkorn, F. E., Duffie, N. A., Morrow, J. D., & Wang, Q., "Effect of beam diameter on pulsed laser polishing of S7 tool steel," CIRP Annals, Vol. 63, No. 1, pp. 237-240, 2014. https://doi.org/10.1016/j.cirp.2014.03.055
  21. Glicksman M., Diffusion in Solids: Field Theory, Solid-State Principles, and Applications, John Wiley& Sons Inc, 50-55, 1999.
  22. Mustafa, H., Mezera, M., Matthews, D. T. A., & Romer, G. R. B. E., "Effect of surface roughness on the ultrashort pulsed laser ablation fluence threshold of zinc and steel," Applied Surface Science, Vol, 488, pp. 10-21, 2019. https://doi.org/10.1016/j.apsusc.2019.05.066