DOI QR코드

DOI QR Code

Performance and Thermal Endurance Tests of a High Pressure Pump Fueled with DME

DME를 연료로 하는 고압펌프의 성능 및 내열 특성 평가

  • BAEK, BUM-GI (Graduate School of Mechanical Engineering, University of Ulsan) ;
  • LIM, OCK-TAECK (School of Mechanical Engineering, University of Ulsan)
  • 백범기 (울산대학교 대학원 건설기계공학과) ;
  • 임옥택 (울산대학교 기계공학부)
  • Received : 2019.12.20
  • Accepted : 2020.02.28
  • Published : 2020.02.28

Abstract

The main scope of this paper is to see if the conventional pump can be properly used for a specific fuel, Di-methyl Ether (DME) despite of its low lubricity and high reactivity in the experimental conditions. A wobble plate type fuel pump was connected to the common rail to verify that the pump could deliver the fuel at the required pressure and resultantly DME could be used as fuel without modifying the original pump. At each required pressure (30 Mpa, 35 Mpa, 40 Mpa, 45 Mpa, and 50 Mpa), the pump met the pressure required by the common rail. In addition, pump performance experiments tended to follow the usual performance curve while the flow rate decreased as the pressure increased. The maximum flow rate of the pump was 470 kg/h at 30 Mpa and all measurements were taken with keeping DME temperature below 60℃.

Keywords

References

  1. C. S. Lee, "Atomization and combustion characteristics of alternative fuels for automotive diesel engine", The Korean Society Of Automotive Engineers, 2012, pp. 2714-2719. Retrieved from http://www.dbpia.co.kr/Journal/articleDetail?nodeId=NODE02083961.
  2. Y. Sin, G. Lee, H. Kim, S. J. Jeong, K. Park, and H. K. Suh, "Effect of flow control valve type on the performance of DME high pressure fuel pump", Transactions of the Korean Society of Automotive Engineers, Vol. 21, No. 5, 2013, pp. 67-68, doi: https://doi.org/10.7467/KSAE.2013.21.5.067.
  3. H. K. Ma, B. R. Hou, H. Y. Wu, C. Y. Lin, J. J. Gao, and M. C. Kou, "Development and application of a diaphragm micro-pump with piezoelectric device", Microsyst. Technol., Vol. 14, No. 7, pp. 1001-1007, 2008, doi: https://doi.org/10.1007/s00542-007-0462-6.
  4. P. R. Dixon, "Certificate pursuant to section 12 of the weights and measures act 1985", Department for Business Innovation & Skills, 2016, pp. 4-10. Retrieved from https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/296219/UK-2780-revision-3.pdf.
  5. S. H. Lee, S. M. Oh, Y. Choi, K. Y. Kang, W. H. Choi, and K. O. Cha, "Combustion characteristics study of an SI engine operated with DME blended LPG fuel", Journal of the Korean Institute of Gas, Vol. 12, No. 3, 2008, pp. 7-12. Retrieved from http://www.koreascience.or.kr/article/JAKO200831235452965.page.
  6. S. H. Suh, H. H. Kim, M. D. Rakibuzzaman, K. W. Kim, and I. S. Yoon, "A study on the performance evaluation of variable-speed drive pump", The KSFM Journal of Fluid Machinery, 2017, pp. 83-88, doi: https://doi.org/10.5293/kfma.2014.17.5.083.