한국지반공학회논문집 (Journal of the Korean Geotechnical Society)

  • 제36권2호
  • /
  • Pages.17-28
  • /
  • 2020
  • /
  • 1229-2427(pISSN)
  • /
  • 2288-646X(eISSN)
한국지반공학회 (Korean Geotechnical Society)
권호 표지
DOI QR코드

DOI QR Code

제주도 화산암의 압열인장강도와 일축압축강도로부터 추정된 점착력과 내부마찰각

Cohesion and Internal Friction Angle Estimated from Brazilian Tensile Strength and Unconfined Compressive Strength of Volcanic Rocks in Jeju Island

  • 문경태 (제주대학교 토목공학과) ;
  • 양순보 (일본 국립연구개발법인 해상.항만.항공기술연구소 항만공항기술연구소)
  • Moon, Kyoungtae (Dept. of Civil Eng., Jeju National Univ.) ;
  • Yang, Soon-Bo (Port and Airport Research Institute, National Institute of Maritime, Port and Aviation Technology)
  • 투고 : 2019.12.07
  • 심사 : 2020.02.24
  • 발행 : 2020.02.29
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는, 제주도 화산암의 인장강도와 관련하여, 기존의 연구결과 및 본 연구에서 수행된 시험결과에 대한 종합적인 비교·분석을 수행하였으며, 제주도 화산암의 압열인장강도와 일축압축강도로부터 추정된 점착력과 내부 마찰각의 특성 및 그 유효성을 각각 살펴보았다. 제주도 화산암의 압열인장강도는 흡수율과 밀접한 관계에 있었으며, 흡수율이 증가함에 따라 지수 함수적으로 급격하게 감소하는 특성을 갖고 있었다. 내부 마찰각은 압열인장도강도에 대한 일축압축강도의 비(σc / σt)와 밀접한 관계에 있었으며, 강도비 σc / σt가 증가함에 따라 내부 마찰각은 로그 함수적으로 증가하는 특성을 갖고 있었다. 그리고 제주도 화산암의 강도비 σc / σt는 내부 마찰각의 크기에 따라 약 5~20 사이의 값을 나타내고 있었다. 한편, 점착력(c)의 경우, 흡수율 및 압열인장강도와 밀접한 관계에 있음을 확인할 수 있었다. 점착력과 흡수율 사이에는 압열인장강도와 흡수율의 관계와 같이 지수 함수적인 관계에 있으며, 점착력과 압열인장강도 사이에는 선형관계에 있음을 확인할 수 있었다. 그리고 일축압축강도와 압열인장강도로부터 추정된 내부 마찰각과 점착력은 각각 삼축압축강도로부터 추정된 내부 마찰각과 점착력에 비해 약 13% 과소평가 그리고 약 24% 정도 과대평가되는 경향을 보였다.

With respect to the tensile strength of volcanic rocks in Jeju Island, a comparative study was conducted using the existing research results and the test results performed in this study. In addition, the characteristics and effectiveness of the cohesion and internal friction angle estimated from the Brazilian tensile strength and unconfined compressive strength of Jeju volcanic rocks were investigated. As results, the Brazilian tensile strength of Jeju volcanic rocks was closely related to absorption, and decreased exponentially as the absorption increased. It was confirmed that the internal friction angle was closely related to the ratio of unconfined compressive strength to Brazilian tensile strength (σc / σt), and increased logarithmically as the ratio of σc / σt increased. In addition, the ratios of σc / σt of Jeju volcanic rocks were in the range of 5~20 depending on the magnitude of internal friction angle. In the case of cohesion, it was closely related to the absorption and Brazilian tensile strength. The cohesion exponentially decreased as the absorption increased, such as the relation between the Brazilian tensile strength and absorption. It was confirmed that there was a linear relation between the cohesion and Brazilian tensile strength.

키워드

참고문헌

  1. ASTM D7012-04, Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures, ASTM International.
  2. Cho, T.C., Lee, S.B., Hwang, T.J., and Won, K.S. (2009), "Variations of Mechanical Properties of Hallasan Trachyte with respect to the Degree of Weathering", Tunnel and Underground Space, Vol.19, No.4, pp.287-303 (in Korean).
  3. Eum, K.Y. (2002), Study on the Mechanical Properties of Volcanic Rocks in Chejudo, Master thesis, Yonsei University, p.63 (in Korean).
  4. Griffith, A.A. (1924), "The theory of rupture", Proceedings of the 1st International Congress on Applied Mechanics, pp.54-63.
  5. Hoek, E. and Brown, E.T. (1997), "Practical Estimates of Rock Mass Strength", International Journal of Rock Mechanics and Mining Sciences, Vol.34, No.8, pp.1165-1186. https://doi.org/10.1016/S1365-1609(97)80069-X
  6. Kim, J.H. (2006), A Study on the Mechanical Characteristics and the Strength in Pyoseonri Basalt, Master thesis, Jeju National University, p.93 (in Korean).
  7. Kim, Y.K. and Choi, O.G. (1991), "Engineering Geological Characteristics of Volcanic Rocks of the Northwestern Cheju Island, Korea", The Journal of Engineering Geology, Vol.1, No.1, pp. 19-37 (in Korean).
  8. Moon, K., Park, S., Kim, Y., and Yang, S. (2014), "Mechanical Properties of Basalt in Jeju Island with respect to Porosity", Journal of the Korean Society of Civil Engineering, Vol.34, No.4, pp.1215-1225 (in Korean). https://doi.org/10.12652/Ksce.2014.34.4.1215
  9. Multiplatform GEOscience Information System (MGEO), Korea Institute of Geoscience and Mineral Resources (KIGAM), mgeo.kigam.re.kr
  10. Nam, J.M., Yun, J.M., Song, Y.S., and Kim, J.H. (2008a), "Analysis of Engineering Properties to Basalt in Cheju Island", Journal of Korean Geosynthetics Society, Vol.7, No.1, pp.12-21 (in Korean).
  11. Nam, J.M., Yun, J.M., Song, Y.S., and Kim, J.H. (2008b), "Analysis of Influence Factors to Compressive and Tensile Strength of Basalt in Cheju Island", The Journal of Engineering Geology, Vol.18, No.2, pp.215-225 (in Korean).
  12. Nam, J.M., Yun, J.M., and Song, Y.S. (2009), "Estimation to the Strength of Basalt in Jeju Island according to Rock Failure Criterions", The Journal of Engineering Geology, Vol.19, No.2, pp.153-163 (in Korean).
  13. Piratheepan, J., Gnanendran, C.T., and Arulrajah, A. (2012), "Determination of c and ${\phi}$ from an IDT and Unconfined Compression Testing and Numerical Analysis", Journal of Materials in Civil Engineering, Vol.24, No.9, pp.1153-1163. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000493
  14. Sivakugan, N., Das, B.M., Lovisa, J., and Patra, C.R. (2014), "Determination of c and ${\phi}$ of rocks from indirect tensile strength and uniaxial compression tests", International Journal of Geotechnical Engineering, Vol.8, No.1, pp.59-65. https://doi.org/10.1179/1938636213Z.00000000053
  15. Thuro, K., Plinninger, R.J., Zah, S., and Schutz, S. (2001), "Scale effects in rock strength properties. Part 1: Unconfined compressive test and Brazilian test", ISRM Regional Symposium EUROCK 2001, pp.169-174.
  16. Yang, S.B. (2014), "Comparative Study on Physical and Mechanical Characteristics of Volcanic Rocks in Jeju Island", Journal of the Korean Geotechnical Society, Vol.30, No.11, pp.39-49 (in Korean). https://doi.org/10.7843/kgs.2014.30.11.39
  17. Yang, S.B. (2015a), "Physical and Mechanical Characteristics of Basalts in Northwestern and Southeastern Jeju Island", Journal of the Korean Geotechnical Society, Vol.31, No.7, pp.41-52 (in Korean). https://doi.org/10.7843/kgs.2015.31.7.41
  18. Yang, S.B. (2015b), "Cohesion and Internal Friction Angle of Basalts in Jeju Island", Journal of the Korean Geotechnical Society, Vol.31, No.11, pp.33-40 (in Korean). https://doi.org/10.7843/kgs.2015.31.11.33
  19. Yang, S.B. (2016), "Strength Parameters of Basalts in Jeju Island according to Rock Failure Criterions", Journal of the Korean Geotechnical Society, Vol.32, No.3, pp.15-27 (in Korean). https://doi.org/10.7843/kgs.2016.32.3.15
  20. Yang, S. and Sassa, S. (2016), "Mechanical Characteristics and Design Strength Parameters due to Vesicular Property of Basalts", Journal of Japan Society Civil Engineers, Ser. B3, Vol.72, No.2, pp.437-442 (in Japanese).
  21. Yang, S. and Sassa, S. (2017), "Effects of Porosity on Mechanical Characteristics of Vesicular Basalts", Proceedings of the 27th International Ocean and Polar Engineering Conference, pp.705-711.
  22. Yang, S.B. and Boo, S.P. (2019), "Estimation of Deformation Modulus of Basaltic Rock Masses in Northeastern and Northwestern Jeju Island", Journal of the Korean Geotechnical Society, Vol.35, No.1, pp.5-15 (in Korean). https://doi.org/10.7843/KGS.2019.35.1.5
  23. Yoon, S.H. and Ko, K.W. (2011), Topography, Geology and Underground Water in Jeju Island, Nae Ha Publishing Company, p.130 (in Korean).
  24. Yu, Y., Yin, J., and Zhang, Z. (2006), "Shape effects in the Brazilian tensile strength test and a 3D FEM correction", International Journal of Rock Mechanics and Mining Sciences, Vol. 43, pp. 623-627. https://doi.org/10.1016/j.ijrmms.2005.09.005