DOI QR코드

DOI QR Code

A plastic strain based statistical damage model for brittle to ductile behaviour of rocks

  • Zhou, Changtai (Guangdong Provincial Key Laboratory of Deep Earth Sciences and Geothermal Energy Exploitation and Utilization, Institute of Deep Earth Sciences and Green Energy, College of Civil and Transportation Engineering, Shenzhen University) ;
  • Zhang, Kai (Guangdong Provincial Key Laboratory of Deep Earth Sciences and Geothermal Energy Exploitation and Utilization, Institute of Deep Earth Sciences and Green Energy, College of Civil and Transportation Engineering, Shenzhen University) ;
  • Wang, Haibo (Mining Institute, China Coal Research Institute) ;
  • Xu, Yongxiang (Mining Institute, China Coal Research Institute)
  • 투고 : 2019.08.31
  • 심사 : 2020.04.03
  • 발행 : 2020.05.25

초록

Rock brittleness, which is closely related to the failure modes, plays a significant role in the design and construction of many rock engineering applications. However, the brittle-ductile failure transition is mostly ignored by the current statistical damage constitutive model, which may misestimate the failure strength and failure behaviours of intact rock. In this study, a new statistical damage model considering rock brittleness is proposed for brittle to ductile behaviour of rocks using brittleness index (BI). Firstly, the statistical constitutive damage model is reviewed and a new statistical damage model considering failure mode transition is developed by introducing rock brittleness parameter-BI. Then the corresponding damage distribution parameters, shape parameter m and scale parameter F0, are expressed in terms of BI. The shape parameter m has a positive relationship with BI while the scale parameter F0 depends on both BI and εe. Finally, the robustness and correctness of the proposed damage model is validated using a set of experimental data with various confining pressure.

키워드

과제정보

연구 과제 주관 기관 : Department of Science and Technology of Guangdong, Natural Science Foundation of China

The PhD scholarship provided by the China Scholarship Council (CSC) to the first author is gratefully acknowledged. This research is financially supported by the Department of Science and Technology of Guangdong Province (No. 2019ZT08G315) and the Natural Science Foundation of China (No. 51827901).

참고문헌

  1. Akinbinu, V.A. (2017), "Relationship of brittleness and fragmentation in brittle compression", Eng. Geol., 221, 82-90. https://doi.org/10.1016/j.enggeo.2017.02.029.
  2. Altindag, R. (2003), "Correlation of specific energy with rock brittleness concepts on rock cutting", South Afr. Inst. Min. Metall., 103(3), 163-171.
  3. Andreev, G.E. (1995), Brittle Failure of Rock Materials, CRC Press
  4. Cao, W.G., Zhao, H., Li, X. and Zhang, Y.J. (2010), "Statistical damage model with strain softening and hardening for rocks under the influence of voids and volume changes", Can. Geotech. J., 47(8), 857-871. https://doi.org/10.1139/T09-148.
  5. Cao, W., Tan, X., Zhang, C. and He, M. (2018), "A constitutive model to simulate the full deformation and failure process for rocks considering initial compression and residual strength behaviors", Can. Geotech. J., 56(5), 649-661. https://doi.org/10.1139/cgj-2018-0178.
  6. Chen, G., Li, T., Wang, W., Guo, F. and Yin, H. (2017), "Characterization of the brittleness of hard rock at different temperatures using uniaxial compression tests", Geomech. Eng., 13(1), 63-77. https://doi.org/10.12989/gae.2017.13.1.063.
  7. Deng, J. and Gu, D. (2011), "On a statistical damage constitutive model for rock materials", Comput. Geosci., 37(2), 122-128. https://doi.org/10.1016/j.cageo.2010.05.018.
  8. Evans, B., Fredrich, J.T. and Wong, T. (1990), The Brittle-Ductile Transition in Rocks: Recent Experimental and Theoretical Progress, American Geophysical Union, U.S.A.
  9. Fredrich, J.T., Evans, B. and Wong, T.F. (1990), "Effect of grain size on brittle and semibrittle strength: Implications for micromechanical modelling of failure in compression", J. Geophys. Res. Solid Earth, 95(B7), 10907-10920. https://doi.org/10.1029/JB095iB07p10907.
  10. Fuenkajorn, K., Sriapai, T. and Samsri, P. (2012), "Effects of loading rate on strength and deformability of Maha Sarakham salt", Eng. Geol., 135-136, 10-23. https://doi.org/10.1016/j.enggeo.2012.02.012.
  11. Hajiabdolmajid, V. and Kaiser, P. (2002), "Brittleness of rock and stability assessment in hard rock tunneling", Tunn. Undergr. Sp. Technol., 18(1), 35-48. https://doi.org/10.1016/S0886-7798(02)00100-1.
  12. Hajiabdolmajid, V., Kaiser, P.K. and Martin, C.D. (2002), "Modelling brittle failure of rock", Int. J. Rock Mech. Min. Sci., 39(6), 731-741. https://doi.org/10.1016/S1365-1609(02)00051-5.
  13. Holt, R.M., Fjær, E., Stenebraten, J.F. and Nes, O.M. (2015), "Brittleness of shales: Relevance to borehole collapse and hydraulic fracturing", J. Petrol. Sci. Eng., 131, 200-209. https://doi.org/10.1016/j.petrol.2015.04.006.
  14. Horii, H. and Nemat-Nasser, S. (1986), "Brittle failure in compression: splitting, faulting and brittle-ductile transition", Philos. Trans. R Soc. London Ser A Math Phys. Eng. Sci., 319(1549), 337-374. https://doi.org/10.1098/rsta.1986.0101.
  15. Hucka, V. and Das, B. (1974), "Brittleness determination of rocks by different methods", Int. J. Rock Mech. Min. Sci., 11(10), 389-392. https://doi.org/10.1016/0148-9062(74)91109-7.
  16. Kivi, I.R., Ameri, M. and Molladavoodi, H. (2018), "Shale brittleness evaluation based on energy balance analysis of stress-strain curves", J. Petrol. Sci. Eng., 167, 1-19. https://doi.org/10.1016/j.petrol.2018.03.061.
  17. Lemaitre, J. (1984), "How to use damage mechanics", Nucl. Eng. Des., 80(2), 233-245. https://doi.org/10.1016/0029-5493(84)90169-9.
  18. Li, X., Cao, W.N. and Su, Y. (2012), "A statistical damage constitutive model for softening behavior of rocks", Eng. Geol., 143-144, 1-17. https://doi.org/10.1016/j.enggeo.2012.05.005.
  19. Liu, D., He, M. and Cai, M. (2017), "A damage model for modeling the complete stress-strain relations of brittle rocks under uniaxial compression", Int. J. Damage Mech., 27(7), 1000-1019. https://doi.org/10.1177/1056789517720804.
  20. Liu, H. and Yuan, X. (2015), "A damage constitutive model for rock mass with persistent joints considering joint shear strength", Can. Geotech. J., 52(8), 1136-1143. https://doi.org/10.1139/cgj-2014-0252.
  21. Martin, C.D. and Chandler, N.A. (1994), "The progressive fracture of Lac du Bonnet granite", Int. J. Rock Mech. Min. Sci., 31(6), 643-659. https://doi.org/10.1016/0148-9062(94)90005-1.
  22. Mas, D. and Chemenda, A.I. (2015), "An experimentally constrained constitutive model for geomaterials with simple friction-dilatancy relation in brittle to ductile domains", Int. J. Rock Mech. Min. Sci., 77, 257-264. https://doi.org/10.1016/j.ijrmms.2015.04.013.
  23. Peng, J., Cai, M., Rong, G., Yao, M.D., Jiang, Q.H. and Zhou, C. (2017), "Determination of confinement and plastic strain dependent post-peak strength of intact rocks", Eng. Geol., 218, 187-196. https://doi.org/10.1016/j.enggeo.2017.01.018.
  24. Peng, J., Rong, G., Cai, M. and Zhou, C.B. (2015), "A model for characterizing crack closure effect of rocks", Eng. Geol., 189, 48-57. https://doi.org/10.1016/j.enggeo.2015.02.004.
  25. Peng, S.S. (1973), "Time-dependent aspects of rock behavior as measured by a servocontrolled hydraulic testing machine", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 10(3), 235-246. https://doi.org/10.1016/0148-9062(73)90033-8.
  26. Rybacki, E., Meier, T. and Dresen, G. (2016), "What controls the mechanical properties of shale rocks? - Part II: Brittleness", J. Petrol. Sci. Eng., 144, 39-58. https://doi.org/10.1016/j.petrol.2016.02.022.
  27. Smoltczyk, U. and Gartung, E. (1979), "Geotechnical properties of a soft Keuper sandstone", Proceedings of the 4th International Society for Rock Mechanics and Rock Engineering Congress, Montreux, Switzerland, September.
  28. Stavrogin, A.N. and Tarasov, B.G. (2001), Experimental Physics and Rock Mechanics, CRC Press
  29. Tang, C.A., Yang, W.T., Fu, Y.F. and Xu, X.H. (1998), "A new approach to numerical method of modelling geological processes and rock engineering problems-continuum to discontinuum and linearity to nonlinearity", Eng. Geol., 49(3-4), 207-214. https://doi.org/10.1016/S0013-7952(97)00051-3.
  30. Wang, H., Li, Y., Li, S., Zhang, Q. and Liu, J. (2016), "An elasto-plastic damage constitutive model for jointed rock mass with an application", Geomech. Eng., 11(1), 77-94. https://doi.org/10.12989/gae.2016.11.1.077.
  31. Wawersik, W.R. and Fairhurst, C. (1970), "A study of brittle rock fracture in laboratory compression experiments", Int. J. Rock Mech. Min. Sci., 7(5), 561-575. https://doi.org/10.1016/0148-9062(70)90007-0.
  32. Weibull, W. (1951), "A statistical distribution function of wide applicability", J. Appl. Mech., 18, 293-297. https://doi.org/10.1115/1.4010337
  33. Xie, H., Zhu, J., Zhou, T., Zhang, K. and Zhou, C. (2020), "Conceptualization and preliminary study of engineering disturbed rock dynamics", Geomech. Geophys. Geo-Energy Geo-Resour., 6(2), 1-14. https://doi.org/10.1007/s40948-020-00157-x.
  34. Xue, X. (2015), "Study on relations between porosity and damage in fractured rock mass", Geomech. Eng., 9(1), 15-24. https://doi.org/10.12989/gae.2015.9.1.015.
  35. Zhou, C., Karakus, M., Xu, C. and Shen, J. (2020), "A new damage model accounting the effect of joint orientation for the jointed rock mass", Arab. J. Geosci., 13(7), 1-13. https://doi.org/10.1007/s12517-020-5274-3.

피인용 문헌

  1. Experimental Study on the Effect of Brittleness on the Dynamic Mechanical Behaviors of the Coal Measures Sandstone vol.2021, 2020, https://doi.org/10.1155/2021/6679333