Geomechanics and Engineering

  • 제21권4호
  • /
  • Pages.315-326
  • /
  • 2020
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of particle size and saturation conditions on the breakage factor of weak rockfill materials under one-dimensional compression testing

  • Rahmani, Hamidreza (Faculty of Civil and Environmental Engineering, Tarbiat Modares University) ;
  • Panah, Ali Komak (Faculty of Civil and Environmental Engineering, Tarbiat Modares University)
  • 투고 : 2019.07.16
  • 심사 : 2020.03.20
  • 발행 : 2020.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

The long-term behavior of rockfill material used in the construction of infrastructures such as dams is of great significance. Because of concerns about the application of weak rockfill material in dam construction, further experimental studies on the behavior of these materials are required. In this study, laboratory experiments were performed to investigate the one-dimensional deformation and particle breakage of the weak rockfill material under stress. A one-dimensional compression apparatus was designed and developed for testing of rockfill materials of different maximum particle sizes (MPSs). The compression tests were performed under dry, wet and saturated conditions on samples of rockfill material obtained from a dam construction site in Iran. The results of the experiments conducted at the specimen preparation stage and the 1D compression tests are presented. In weak rockfill, the effect of the addition of water on the behavior of the material was uncertain as there were both an increases and decreases observed in particle breakage. Increasing the MPS of the weak rockfill materials increased particle breakage, which was similar to the behavior of strong rockfill material. In all of the MPSs examined, the settlement of specimens under wet conditions was higher than that observed under dry conditions. Also, the greatest deformation occurred during the first hour of loading.

키워드

과제정보

The authors would like to thank Mr. Mousavi and Mr. Keshavarz of the Qazvin Regional Water Company for their kind support and cooperation during the material sampling in this study

참고문헌

  1. Absaran Consulting Engineering (2010), Nohob Storage Dam Studies.
  2. Araei, A.A., Razeghi, H.R., Ghalandarzadeh, A. and Tabatabaei, S.H. (2012), "Effects of loading rate and initial stress state on stress-strain behavior of rock fill materials under monotonic and cyclic loading conditions", Scientia Iranica, 19(5), 1220-1235. https://doi.org/10.1016/j.scient.2012.08.002.
  3. Araei, A.A., Tabatabaei, S.H. and Razeghi, H.R. (2012), "Cyclic and post-cyclic monotonic behavior of crushed conglomerate rockfill material under dry and saturated conditions", Scientia Iranica, 19(1), 64-76. https://doi.org/10.1016/j.scient.2011.12.001.
  4. ASTM C535 (2013), "Standard test method for resistance to degradation of large-size coarse aggregate by abrasion and impact in the Los Angeles machine", American Society for Testing and Materials, West Conshohocken, Pennsylvania, U.S.A.
  5. ASTM D2216 (2010), "Standard test methods for laboratory determination of water (moisture) content of soil and rock by mass", American Society for Testing and Materials, West Conshohocken, Pennsylvania, U.S.A.
  6. ASTM D4253 (2016), "Standard test methods for maximum index density and unit weight of soils using a vibratory table", American Society for Testing and Materials, West Conshohocken, Pennsylvania, U.S.A.
  7. ASTM D4254 (2016), "Standard test methods for minimum index density and unit weight of soils and calculation relative density", American Society for Testing and Materials, West Conshohocken, Pennsylvania, U.S.A.
  8. Ben-Nun, O. and Einav, I. (2010), "The role of self-organization during confined comminution of granular materials", Philos. T. Royal Soc. A, 368(1910), 231-247. https://doi.org/10.1098/rsta.2009.0205.
  9. Cetin, H., Laman, M. and Ertunc, A. (2000), "Settlement and slaking problems in the world's fourth largest rock-fill dam, the Ataturk Dam in Turkey", Eng. Geol., 56(3-4), 225-242. https://doi.org/10.1016/S0013-7952(99)00049-6.
  10. Charles, J.A. and Watts, K.S. (1980), "The influence of confining pressure on the shear strength of compacted rockfill", Geotechnique, 30(4), 353-367. https://doi.org/10.1680/geot.1980.30.4.353.
  11. Cooke, J.B. (1984), "Progress in rockfill dams, (18th Terzaghi Lecture)", Geotech. Eng., 110(10), 1381-1414. https://doi.org/10.1061/(ASCE)07339410(1984)110:10(138-1).
  12. Cooke, J.B. (1993), "Rockfill and the rockfill dam", Proceedings of the International Symposium on High Earth-Rockfill Dams, Chinese Society for Hydro-electric Engineering, Beijing, China, October.
  13. Cristian, J. (2011), "Mechanical behavior of rockfill materials-Application to concrete face rockfill dams", Ph.D. Dissertation, Ecole Centrale Paris, Paris, France.
  14. Einav, I., Houlsby, G.T. and Nguyen, G.D. (2007), "Coupled damage and plasticity models derived from energy and dissipation potentials", Int. J. Solids Struct., 44(7-8), 2487-2508. https://doi.org/10.1016/j.ijsolstr.2006.07.019.
  15. Galloway, J.D. (1939), "The design of rock-fill dams", Trans. Amer. Soc. Civ. Eng., 104(1), 1-24. https://doi.org/10.1061/TACEAT.0005083
  16. Gupta, A.K. (2000), "Constitutive modelling of rockfill materials," Ph.D. Thesis, IIT, Delhi, India.
  17. Gupta, A.K. (2009), "Effect of particle size and confining pressure on breakage and strength parameters of rockfill materials", Elect. J. Geotech. Eng., 14.
  18. Gupta, A.K. (2009), "Triaxial behaviour of rockfill materials", Elect. J. Geotech. Eng., 14.
  19. Gupta, A.K. (2016), "Effects of particle size and confining pressure on breakage factor of rockfill materials using medium triaxial test", J. Rock Mech. Geotech. Eng., 8(3), 378-388. https://doi.org/10.1016/j.jrmge.2015.12.005.
  20. Hardin, B.O. (1985), "Crushing of soil particles", J. Geotech. Eng., 111(10), 1177-1192. https://doi.org/10.1061/(ASCE)07339410(1985)111:10(117-7).
  21. Honkanadavar, N.P. and Sharma, K.G. (2016), "Modeling the triaxial behavior of riverbed and blasted quarried rockfill materials using hardening soil model", J. Rock Mech. Geotech. Eng., 8(3), 350-365. https://doi.org/10.1016/j.jrmge.2015.09.007.
  22. ICOLD Bulletin134 (2008), Weak Rocks and Shales in Dams, International Commission on Large Dams, Paris, France.
  23. ICOLD Bulletin92 (1993), Rock Material for Rockfill Dams- Review and Recommendation, International Commission on Large Dams, Paris, France.
  24. Indraratna, B., Wijewardena, L.S.S. and Balasubramaniam, A.S. (1993), "Large-scale triaxial testing of greywacke rockfill", Geotechnique, 43(1),37-51. https://doi.org/abs/10.1680/geot.1993.43.1.37.
  25. ISRM (2000), Suggested Methods for Determining the Uniaxial Compressive Strength and Deformability of Rock Materials, International Society for Rock Mechanics, Lisbon, Portugal.
  26. Khalkhali, A.B., Mirghasemi, A.A. and Mohammadi, S. (2011), "Numerical simulation of particle breakage of angular particles using combined DEM and FEM", Powder Technol., 205(1-3), 15-29. https://doi.org/10.1016/j.powtec.2010.07.034.
  27. Lade, P.V., Yamamuro, J.A. and Bopp, P.A. (1996), "Significance of particle crushing in granular materials", J. Geotech. Eng., 122(4), 309-316. https://doi.org/10.1061/(ASCE)07339410(1996)122:4(309)
  28. Lowe, J. (1964), "Shear strength of coarse embankment dam materials", Proceedings of the 8th International Congress on Large Dams, Paris, France, May.
  29. Marachi, N.D., Chan, C.K. and Seed, H.B. (1972), "Evaluation of properties of rockfill material", J. Soil Mech. Found. Div., 98(1), 95-114. https://doi.org/10.1061/JSFEAQ.0001735
  30. Marsal, R J. (1967), "Large-scale testing of rockfill materials", J. Soil Mech. Found. Div., 93(2), 27-43. https://doi.org/10.1061/JSFEAQ.0000958
  31. Marsal, R.J. (1965), "Research on the behavior of granular materials and rockfill samples".
  32. Miscevic, P. and Vlastelica, G. (2009), "Shear strength of weathered soft rock-proposal of test method additions", Proceedings of the Regional Symposium of ISRM- EUROCK 2009, Cavtat, Croatia, October.
  33. Miura, N. and Yamamoto, T. (1976), "Particle-crushing properties of sands under high stresses", Technol. Reports Yamaguchi Univ., 1(4), 439-447.
  34. Miura, S., Yagi, K. and Asonuma, T. (2003), "Deformation-strength evaluation of crushable volcanic soils by laboratory and in-situ testing", Soils Found., 43(4), 47-57. https://doi.org/10.3208/sandf.43.4_47.
  35. Nakata, Y., Kato, Y., Hyodo, M., Hyde, A.F. and Murata, H. (2001), "One-dimensional compression behaviour of uniformly graded sand related to single particle crushing strength", Soils Found., 41(2), 39-51. https://doi.org/10.3208/sandf.41.2_39.
  36. Neves, D. Maranha, E. and Pinto, A.V. (1989), "Collapse of rockfill", Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, Rio de Janeiro, Brazil, August.
  37. Neves, D. Maranha, E. and Veiga Pinto, A. (1988), "Modelling collapse on rockfill dams", Comput. Geotech., 6(2), 131-153. https://doi.org/10.1016/0266-352X(88)90077-8.
  38. Nishiyama, T., Murakami, A., Chihara, E. and Hasegawa, T. (2006), "A study to estimate the deterioration of rockfill materials", Proceeding of the International Symposium on Geomechanics and Geotechnics of Particulate Media, Ube, Japan, September.
  39. Nobari, E.S. and Duncan, J.M. (1972), "Effect of reservoir filling on stresses and movement in Earth and rockfill dams", A Report of an Investigation (No. TE-72-1), University of California, Berkeley, California, U.S.A.
  40. Oldecop, L.A. and Alonso, E.E. (2007), "Theoretical investigation of the time-dependent behaviour of rockfill", Geotechnique, 57(3), 289-301. https://doi.org/10.1680/geot.2007.57.3.289.
  41. Parkin, A.K. (1977), "The compression of rockfill", Australian Geomech. J., 7, 33-39.
  42. Sayao, A.S.F.J., Maia, P.C.A. and Nunes, A.L.L.S. (2005), "Considerations on the shear strength behavior of weathered rockfill", Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering, Osaka, Japan, September.
  43. Sherard, J.L. and Cooke, J.B. (1987), "Concrete-face rockfill dam: I. Assessment", J. Geotech. Eng., 113(10), 1096-1112. https://doi.org/10.1061/(ASCE)0733-9410(1987)113:10(1096).
  44. Sowers, G.F. (1965), "Compressibility of broken rock and the settlement of rockfills", Proceedings of the 6th International Conference on Soil Mechanics and Foundation Engineering, Montreal, Canada, September.
  45. Varadarajan, A., Sharma, K.G., Venkatachalam, K. and Gupta, A.K. (2003), "Testing and modeling two rockfill materials", J. Geotech. Geoenviron. Eng., 129(3), 206-218. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:3(206).
  46. Vasistha, Y., Gupta, A.K. and Kanwar, V. (2012), "Prediction of shear strength parameters: Of two rockfill materials", Elect. J. Geotech. Eng.
  47. Vasistha, Y., Gupta, A.K. and Kanwar, V., (2013), "Medium triaxial testing of some rockfill materials", Elect. J. Geotech. Eng., 18.
  48. Wang, T., Liu, S. and Lu, Y. (2019), "Laboratory experiments on the improvement of rockfill materials with composite grout", Geomech. Eng., 17(3), 309-318. https://doi.org/10.12989/gae.2019.17.3.307.
  49. Woo, I., Fleurisson, J.A. and Park, H.J. (2010), "Influence of weathering on shear strength of joints in a porphyritic granite rock mass in Jechon area, South Korea", Geosci. J., 14(3), 289-299. https://doi.org/10.1007/s12303-010-0026-0.
  50. Xiao, Y. and Liu, H. (2017), "Elastoplastic constitutive model for rockfill materials considering particle breakage", Int. J. Geomech., 17(1),4016041. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000681.
  51. Xiao, Y., Liu, H., Chen, Y. and Jiang, J. (2014), "Strength and deformation of rockfill material based on large-scale triaxial compression tests. II: Influence of particle breakage", J. Geotech. Geoenviron. Eng., 140(12), 4014071. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001177
  52. Xiao, Y., Liu, H., Zhang, W., Liu, H., Yin, F. and Wang, Y. (2016), "Testing and modeling of rockfill materials: A review", J. Rock Mech. Geotech. Eng., 8(3),415-422. https://doi.org/10.1016/j.jrmge.2015.09.009.
  53. Xiao, Y., Meng, M., Daouadji, A., Chen, Q., Wu, Z. and Jiang, X. (2018), "Effects of particle size on crushing and deformation behaviors of rockfill materials", Geosci. Front., 11(2), 375-388. https://doi.org/10.1016/j.gsf.2018.10.010.
  54. Yamamuro, J.A., Bopp, P.A. and Lade, P.V., (1996), "One-dimensional compression of sands at high pressures", J. Geotech. Eng., 122(2), 147-154. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:2(147).
  55. Yin, Y., Zhang, B.Y., Zhang, J.H. and Sun, G.L. (2016), "Effect of densification on shear strength behavior of argillaceous siltstone subjected to variations in weathering-related physical and mechanical conditions", Eng. Geol., 208, 63-68. https://doi.org/10.1016/j.enggeo.2016.04.028.
  56. Zhang, B.Y., Zhang, J.H. and Sun, G.L. (2012), "Particle breakage of argillaceous siltstone subjected to stresses and weathering", Eng. Geol., 137, 21-28. https://doi.org/10.1016/j.enggeo.2012.03.009.
  57. Zhang, B.Y., Zhang, J.H. and Sun, G.L. (2015), "Deformation and shear strength of rockfill materials composed of soft siltstones subjected to stress, cyclical drying/wetting and temperature variations", Eng. Geol., 190, 87-97. https://doi.org/10.1016/j.enggeo.2015.03.006.