DOI QR코드

DOI QR Code

치조제 흡수가 심한 무치악 환자에서 흡착원리를 이용한 총의치 수복 증례

Complete denture fabrication of edentulous patient with severe alveolar bone resorption using suction mechanism: A case report

  • 김현아 (전남대학교 치의학전문대학원 보철학교실) ;
  • 윤귀덕 (전남대학교 치의학전문대학원 보철학교실) ;
  • 조유진 (전남대학교 치의학전문대학원 보철학교실) ;
  • 양홍서 (전남대학교 치의학전문대학원 보철학교실) ;
  • 박상원 (전남대학교 치의학전문대학원 보철학교실) ;
  • 박찬 (전남대학교 치의학전문대학원 보철학교실)
  • Kim, Hyun-Ah (Department of Prosthodontics, School of Dentistry, Chonnam National University) ;
  • Yun, Kwi-Dug (Department of Prosthodontics, School of Dentistry, Chonnam National University) ;
  • Jo, Yu-Jin (Department of Prosthodontics, School of Dentistry, Chonnam National University) ;
  • Yang, Hongso (Department of Prosthodontics, School of Dentistry, Chonnam National University) ;
  • Park, Sang-Won (Department of Prosthodontics, School of Dentistry, Chonnam National University) ;
  • Park, Chan (Department of Prosthodontics, School of Dentistry, Chonnam National University)
  • 투고 : 2019.09.23
  • 심사 : 2019.11.14
  • 발행 : 2020.04.30

초록

흡착원리를 이용한 총의치 제작은 연하나 저작 등의 운동 시 의치 내면의 음압이 형성되어 의치연 주변의 봉쇄를 이루어 유지와 안정을 향상시키고자 소개된 방식이다. 하악 흡착의치는 특히 변형되기 쉬운 후구치융기를 안정 상태에서 채득하여 개구 시 탈락력을 감소시킨다. 이 증례에서는 하악 치조제 흡수가 심한 무치악 환자에서 흡착원리를 통한 총의치 제작을 통해 의치의 향상된 유지력과 안정 및 환자의 만족도를 얻었다.

Fabrication of complete denture with suction mechanism was introduced to enhance the retention and stability of denture by sealing around the denture border by forming negative pressure on the inner side of denture base during functional movement such as swallowing or masticating. Mandibular suction dentures reduce denture dislodging force during opening by taking preliminary impression without pressure on retromolar pad area in rest position. In this case, fabrication of complete denture using suction mechanism for an edentulous patient with severe alveolar bone resorption allowed us to clinically enhance retention and stability of denture and improve satisfaction of patient.

키워드

참고문헌

  1. Misch CE. Contemporary implant dentistry. 3rd ed. Mosby, 2008. p. 295-7.
  2. Collett HA. Final impressions for complete dentures. J Prosthet Dent 1970;23:250-64. https://doi.org/10.1016/0022-3913(70)90180-0
  3. Abe J. Challenge to lower complete denture suction. J Nippon Dent Rev 2007;67:50-89.
  4. Abe J, Kokubo K, Sato K. Mandibular suction-effective denture and BPS: A complete guide. Quintessence Pub Co.; 2012. p. 44-9.
  5. el-Aramany MA, George WA, Scott RH. Evaluation of the needle point tracing as a method for determining centric relation. J Prosthet Dent 1965;15:1043-54. https://doi.org/10.1016/0022-3913(65)90181-2
  6. Abe J. Difference of preliminary impression takings between conventional mandibular complete denture and the mandibular complete denture intended with effective suction. Pract Prosthodont 2010;43:510-24.
  7. Abe J, Kokubo K, Sato K. Mandibular suction-effective denture and BPS: A complete guide. Quintessence Pub Co.; 2012. p. 125-6.
  8. Faculty Council of Complete Denture Prosthodontics. Prosthodontic treatment for edentulous patients. 2nd ed. Dentalwisdom; Seoul; 2014. p. 322-42.

피인용 문헌

  1. 임플란트용 플라스틱 트레이를 이용하여 하악 흡착의치를 제작하는 방법 vol.59, pp.1, 2021, https://doi.org/10.4047/jkap.2021.59.1.36