The Journal of Advanced Prosthodontics

The Korean Academy of Prosthodonitics (대한치과보철학회)
권호 표지
DOI QR코드

DOI QR Code

The effect of thickness and translucency of polymer-infiltrated ceramic-network material on degree of conversion of resin cements

  • Received : 2019.10.31
  • Accepted : 2020.03.04
  • Published : 2020.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

PURPOSE. The aim of the present study was to determine the degree of conversion of light- and dual-cured resin cements used in the cementation of all-ceramic restorations under different thicknesses of translucent (T) and high-translucent (HT) polymer-infiltrated ceramic-network (PICN) material. MATERIALS AND METHODS. T and HT PICN blocks were prepared at 0.5, 1.0, 1.5, and 2.0 mm thicknesses (n=80). Resin cement samples were prepared with a diameter of 6 mm and a thickness of 100 ㎛. Light-cured resin cement was polymerized for 30 seconds, and dual-cure resin cement was polymerized for 20 seconds (n=180). Fourier transform infrared spectroscopy (FTIR) was used for degree of conversion measurements. The obtained data were analyzed with ANOVA and Tukey HSD, and independent t-test. RESULTS. As a result of FTIR analysis, the degree of conversion of the light-cured resin cement prepared under 1.5- and 2.0-mm-thick T and HT ceramics was found to be lower than that of the control group. Regarding the degree of conversion of the dual-cured resin cement group, there was no significant difference from the control group. CONCLUSION. Within the limitation of present study, it can be concluded that using of dual cure resin cement can be suggested for cementation of PICN material, especially for thicknesses of 1.5 mm and above.

Keywords

References

  1. Zimmermann M, Mehl A, Reich S. New CAD/CAM materials and blocks for chairside procedures. Int J Comput Dent 2013;16:173-81.
  2. Lise DP, Van Ende A, De Munck J, Vieira L, Baratieri LN, Van Meerbeek B. Microtensile bond strength of composite cement to novel CAD/CAM materials as a function of surface treatment and aging. Oper Dent 2017;42:73-81. https://doi.org/10.2341/15-263-L
  3. Della Bona A, Corazza PH, Zhang Y. Characterization of a polymer-infiltrated ceramic-network material. Dent Mater 2014;30:564-9. https://doi.org/10.1016/j.dental.2014.02.019
  4. Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 2013;29:419-26. https://doi.org/10.1016/j.dental.2013.01.002
  5. Steinbrenner H. Multichromatic and highly translucent hybrid ceramic Vita Enamic. Int J Comput Dent 2018;21:239-50.
  6. Dauti R, Cvikl B, Lilaj B, Heimel P, Moritz A, Schedle A. Micro-CT evaluation of marginal and internal fit of cemented polymer infiltrated ceramic network material crowns manufactured after conventional and digital impressions. J Prosthodont Res 2019;63:40-6. https://doi.org/10.1016/j.jpor.2018.04.005
  7. Xu Z, Yu P, Arola DD, Min J, Gao S. A comparative study on the wear behavior of a polymer infiltrated ceramic network (PICN) material and tooth enamel. Dent Mater 2017;33:1351-61. https://doi.org/10.1016/j.dental.2017.08.190
  8. Moraes RR, Correr-Sobrinho L, Sinhoreti MA, Puppin-Rontani RM, Ogliari FA, Piva E. Light-activation of resin cement through ceramic: relationship between irradiance intensity and bond strength to dentin. J Biomed Mater Res B Appl Biomater 2008;85:160-5.
  9. Turp V, Sen D, Poyrazoglu E, Tuncelli B, Goller G. Influence of zirconia base and shade difference on polymerization efficiency of dual-cure resin cement. J Prosthodont 2011;20:361-5. https://doi.org/10.1111/j.1532-849X.2011.00721.x
  10. Dewaele M, Truffier-Boutry D, Devaux J, Leloup G. Volume contraction in photocured dental resins: the shrinkage-conversion relationship revisited. Dent Mater 2006;22:359-65. https://doi.org/10.1016/j.dental.2005.03.014
  11. Jung H, Friedl KH, Hiller KA, Haller A, Schmalz G. Curing efficiency of different polymerization methods through ceramic restorations. Clin Oral Investig 2001;5:156-61. https://doi.org/10.1007/s007840100118
  12. Silva EM, Noronha-Filho JD, Amaral CM, Poskus LT, Guimaraes JG. Long-term degradation of resin-based cements in substances present in the oral environment: influence of activation mode. J Appl Oral Sci 2013;21:271-7. https://doi.org/10.1590/1679-775720130026
  13. Collares FM, Portella FF, Leitune VC, Samuel SM. Discrepancies in degree of conversion measurements by FTIR. Braz Oral Res 2013;27:453-54. https://doi.org/10.1590/S1806-83242013000600002
  14. Smith BC. Introduction to Infrared Spectroscopy. In: Fundamentals of Fourier Transform Infrared Spectroscopy. CRC Press New York: Taylor & Francis Group. 2011. p.1-17.
  15. Caprak YO, Turkoglu P, Akgungor G. Does the translucency of novel monolithic CAD/CAM materials affect resin cement polymerization with different curing modes? J Prosthodont 2019;28:e572-9. https://doi.org/10.1111/jopr.12956
  16. Neumann MG, Miranda WG Jr, Schmitt CC, Rueggeberg FA, Correa IC. Molar extinction coefficients and the photon absorption efficiency of dental photoinitiators and light curing units. J Dent 2005;33:525-32. https://doi.org/10.1016/j.jdent.2004.11.013
  17. Jung H, Friedl KH, Hiller KA, Furch H, Bernhart S, Schmalz G. Polymerization efficiency of different photocuring units through ceramic discs. Oper Dent 2006;31:68-77. https://doi.org/10.2341/04-188
  18. Lopes Cde C, Rodrigues RB, Silva AL, Simamoto Junior PC, Soares CJ, Novais VR. Degree of conversion and mechanical properties of resin cements cured through different all-ceramic systems. Braz Dent J 2015;26:484-9. https://doi.org/10.1590/0103-6440201300180
  19. Calgaro PA, Furuse AY, Correr GM, Ornaghi BP, Gonzaga CC. Influence of the interposition of ceramic spacers on the degree of conversion and the hardness of resin cements. Braz Oral Res 2013;27:403-9. https://doi.org/10.1590/S1806-83242013000500004
  20. Turgut S, Bagis B, Turkaslan SS, Bagis YH. Effect of ultraviolet aging on translucency of resin-cemented ceramic veneers: an in vitro study. J Prosthodont 2014;23:39-44. https://doi.org/10.1111/jopr.12061
  21. Vichi A, Carrabba M, Paravina R, Ferrari M. Translucency of ceramic materials for CEREC CAD/CAM system. J Esthet Restor Dent 2014;26:224-31. https://doi.org/10.1111/jerd.12105
  22. Wang F, Takahashi H, Iwasaki N. Translucency of dental ceramics with different thicknesses. J Prosthet Dent 2013;110:14-20. https://doi.org/10.1016/S0022-3913(13)60333-9
  23. Peixoto RT, Paulinelli VM, Sander HH, Lanza MD, Cury LA, Poletto LT. Light transmission through porcelain. Dent Mater 2007;23:1363-8. https://doi.org/10.1016/j.dental.2006.11.025
  24. Al-Juaila E, Osman E, Segaan L, Shrebaty M, Farghaly E. Comparison of translucency for different thicknesses of recent types of esthetic zirconia ceramics versus conventional ceramics. Future Dent J 2018;4:297-301. https://doi.org/10.1016/j.fdj.2018.05.003
  25. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent 2002;88:4-9. https://doi.org/10.1067/mpr.2002.126794
  26. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part II: core and veneer materials. J Prosthet Dent 2002;88:10-5. https://doi.org/10.1067/mpr.2002.126795
  27. Runnacles P, Correr GM, Baratto Filho F, Gonzaga CC, Furuse AY. Degree of conversion of a resin cement lightcured through ceramic veneers of different thicknesses and types. Braz Dent J 2014;25:38-42. https://doi.org/10.1590/0103-6440201302200
  28. Cho SH, Lopez A, Berzins DW, Prasad S, Ahn KW. Effect of different thicknesses of pressable ceramic veneers on polymerization of light-cured and dual-cured resin cements. J Contemp Dent Pract 2015;16:347-52. https://doi.org/10.5005/jp-journals-10024-1688
  29. Novais VR, Raposo LH, Miranda RR, Lopes CC, Simamoto PC Junior, Soares CJ. Degree of conversion and bond strength of resin-cements to feldspathic ceramic using different curing modes. J Appl Oral Sci 2017;25:61-8. https://doi.org/10.1590/1678-77572016-0221
  30. Passos SP, Kimpara ET, Bottino MA, Santos GC Jr, Rizkalla AS. Effect of ceramic shade on the degree of conversion of a dual-cure resin cement analyzed by FTIR. Dent Mater 2013;29:317-23. https://doi.org/10.1016/j.dental.2012.11.014
  31. Kilinc E, Antonson SA, Hardigan PC, Kesercioglu A. The effect of ceramic restoration shade and thickness on the polymerization of light- and dual-cure resin cements. Oper Dent 2011;36:661-9. https://doi.org/10.2341/10-206-L
  32. Akgungor G, Akkayan B, Gaucher H. Influence of ceramic thickness and polymerization mode of a resin luting agent on early bond strength and durability with a lithium disilicatebased ceramic system. J Prosthet Dent 2005;94:234-41. https://doi.org/10.1016/j.prosdent.2005.04.020
  33. Ilie N, Hickel R. Correlation between ceramics translucency and polymerization efficiency through ceramics. Dent Mater 2008;24:908-14. https://doi.org/10.1016/j.dental.2007.11.006
  34. Yan YL, Kim YK, Kim KH, Kwon TY. Changes in degree of conversion and microhardness of dental resin cements. Oper Dent 2010;35:203-10. https://doi.org/10.2341/09-174-L
  35. Kilicarslan MA, Zaimoglu A, Haskan H. Influence of ceramic shade and thickness on the polymerization depth of different resin luting cements. Turkiye Klinikleri J Dental Sci 2008;14:129-36.
  36. Reis AF, Vestphal M, Amaral RCD, Rodrigues JA, Roulet JF, Roscoe MG. Efficiency of polymerization of bulk-fill composite resins: a systematic review. Braz Oral Res 2017;31:e59.
  37. Meng X, Yoshida K, Atsuta M. Hardness development of dual-cured resin cements through different thicknesses of ceramics. Dent Mater J 2006;25:132-7. https://doi.org/10.4012/dmj.25.132
  38. Albino LG, Rodrigues JA, Kawano Y, Cassoni A. Knoop microhardness and FT-Raman evaluation of composite resins: influence of opacity and photoactivation source. Braz Oral Res 2011;25:267-73. https://doi.org/10.1590/S1806-83242011000300013