DOI QR코드

DOI QR Code

Life-cycle-cost optimization for the wind load design of tall buildings equipped with TMDs

  • Venanzi, Ilaria (Department of Civil and Environmental Engineering, University of Perugia) ;
  • Ierimonti, Laura (Department of Civil and Environmental Engineering, University of Perugia) ;
  • Caracoglia, Luca (Department of Civil and Environmental Engineering, Northeastern University)
  • 투고 : 2018.06.24
  • 심사 : 2020.02.04
  • 발행 : 2020.04.25

초록

The paper presents a Life-Cycle Cost-based optimization framework for wind-excited tall buildings equipped with Tuned Mass Dampers (TMDs). The objective is to minimize the Life-Cycle Cost that comprises initial costs of the structure, the control system and costs related to repair, maintenance and downtime over the building's lifetime. The integrated optimization of structural sections and mass ratio of the TMDs is carried out, leading to a set of Pareto optimal solutions. The main advantage of the proposed methodology is that, differently from the traditional optimal design approach, it allows to perform the unified design of both the structure and the control system in a Life Cycle Cost Analysis framework. The procedure quantifies wind-induced losses, related to structural and nonstructural damage, considering the stochastic nature of the loads (wind velocity and direction), the specificity of the structural modeling (e.g., non-shear-type vibration modes and torsional effects) and the presence of the TMDs. Both serviceability and ultimate limit states related to the structure and the TMDs' damage are adopted for the computation of repair costs. The application to a case study tall building allows to demonstrate the efficiency of the procedure for the integrated design of the structure and the control system.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation (NSF)

This collaborative research activity was initiated as part of Laura Ierimonti's study period at Northeastern University in 2016. This activity was supported by the University of Perugia, Italy within the framework of the International PhD program between the Universities of Perugia, Florence and TU Braunschweig. Luca Caracoglia would like to acknowledge the support of the National Science Foundation (NSF) of the United States of America, CAREER Award CMMI-0844977 in 2009-2014, and the partial support of NSF Award CMMI1434880 in 2014-2018. Luca Caracoglia also acknowledges the support of the University of Perugia, mobility program for visiting professors in 2015 ("Decreto Rettorale" D.R. 2244, 2014). Any opinions, findings and conclusions or recommendations are those of the authors and do not necessarily reflect the views of the sponsors.

참고문헌

  1. AISC Steel Construction Manual (2017), American Institute of Steel Construction, Illiois, USA.
  2. Aly, A.M. (2015), "Control of wind-induced motion in high-rise buildings with hybrid TM/MR dampers", Wind Struct., 21(5), 565-595. https://doi.org/10.12989/was.2015.21.5.565.
  3. ASCE/SEI 7-16 (2017), "Minimum Design Loads and Associated Criteria for Buildings and Other Structures", American Society of Civil Engineers.
  4. Bashor, R. and Kareem, A. (2007), "Probabilistic performance evaluation of buildings: an occupant comfort perspective", Proceedings of the 12th International Conference on Wind Engineering.
  5. Bernardini, E., Spence, S.M. and Kareem, A. (2013), "A probabilistic approach for the full response estimation of tall buildings with 3d modes using the HFFB", Struct. Safety, 44, 91-101. https://doi.org/10.1016/j.strusafe.2013.06.002.
  6. Burton, M., Kwok, K. and Abdelrazaq, A. (2015), "Wind-induced motion of tall buildings: designing for occupant comfort", Int. J. High-Rise Build., 4(1), 1-8. https://doi.org/10.21022/IJHRB.2015.4.1.001.
  7. Chang, F.K. (1973), "Human response to motions in tall buildings", J. Struct. Division, 499(6), 1259-1272. https://doi.org/10.1061/JSDEAG.0003537
  8. Chen, X., Kwon, D.K. and Kareem, A. (2014), "High-frequency force balance technique for tall buildings: A critical review and some new insights", Wind Struct., 18(4), 391-422. http://dx.doi.org/10.12989/was.2014.18.4.391.
  9. Chuang, W.C. and Spence, S.M. (2017), "A performance-based design framework for the integrated collapse and non-collapse assessment of wind excited buildings", Eng. Struct., 150, 746-758. https://doi.org/10.1016/j.engstruct.2017.07.030.
  10. Ciampoli, M. and Petrini, F. (2012), "Performance-based Aeolian risk assessment and reduction for tall buildings", Probabilistic Eng. Mech., 28, 75-84. https://doi.org/10.1016/j.probengmech.2011.08.013.
  11. Cornell, C. and Krawinkler, H. (2000), "Progress and challenges in seismic performance assessment", PEER Center News, 3(2), 1-3.
  12. Cui, W. and Caracoglia, L. (2018), "A unified framework for performance-based wind engineering of tall buildings in hurricane-prone regions based on lifetime intervention-cost estimation", Struct. Safety, 73, 75-86. https://doi.org/10.1016/j.strusafe.2018.02.003.
  13. Davenport, A.G. (1964), "Note on the distribution of the largest value of a random function with application to gust loading". Proc. Inst. Civil. Eng. 28, 187-196. https://doi.org/10.1680/iicep.1964.10112.
  14. Davenport, A.G. (1967), "Gust loading factors", J. Struct. Division, ASCE, 93, 11-34. https://doi.org/10.1061/JSDEAG.0001692
  15. EN 1991-1-4:2005 (2005), "Eurocode 1: actions on structures - part 1-4: general actions - wind actions", European Committee for Standardization.
  16. FEMA-P-58 (2012), "Performance assessment calculation tool, volume 1", http://www.fema.gov/media-library/assets/documents/90380.
  17. Griffis, L. (1993), "Serviceability limit states under wind load", Eng. J. Ame. Institute Steel Construct., 30, 1-16.
  18. Hasancebi, O. (2017), "Cost efficiency analyses of steel framework for economical design of multi-storey buildings", J. Construct. Steel Res., 128, 380-396. https://doi.org/10.1016/j.jcsr.2016.09.002.
  19. Holmes, J., Rofail, A. and Aurelius, L. (2003), "High frequency base balance methodologies for tall buildings with torsional and coupled resonant modes", Proceedings of the 11th International Conference on Wind Engineering, U.S.A.
  20. Huang, M.F., Tse, K.T., Chan, C.M. and Lou, W.J. (2011), "Integrated structural optimization and vibration control for improving wind-induced dynamic performance of tall buildings", Int. J. Struct. Stab. Dyn., 11(6), 1139-1161. https://doi.org/10.1142/S021945541100452X.
  21. Ierimonti, L., Caracoglia, L., Venanzi, I. and Materazzi, A.L. (2017), "Investigation on life-cycle damage cost of wind-excited tall buildings considering directionality effects", J. Wind Eng. Indus. Aerod., 171, 207-218. https://doi.org/10.1016/j.jweia.2017.09.020.
  22. Ierimonti, L., Venanzi, I. and Caracoglia, L. (2018), "Life-cycle damage-based cost analysis of tall buildings equipped with tuned mass dampers", J. Wind Eng. Indus. Aerod., 176, 54-64. https://doi.org/10.1016/j.jweia.2018.03.009.
  23. Ierimonti, L., Venanzi, I., Caracoglia, L. and Materazzi, A.L. (2019), "Cost-based design of nonstructural elements for tall buildings under extreme wind environments", J. Aeros. Eng. ASCE, 32(3), 04019020. https://doi.org/10.1061/(ASCE)AS.1943-5525.0001008.
  24. ITIC (2016), "Cost of Hourly Downtime Soars: 81 % of Enterprises Say it Exceeds $ 300K On Average" http://itic-corp.com/blog/2016/08/cost-of-hourly-downtime-soars-81-ofenterprises-say-it-exceeds-300k-on-average/.
  25. Kareem, A., Kijewski, T. and Tamura, Y. (1999), "Mitigation of motions of tall buildings with specific examples of recent applications", Wind Struct., 2(3), 201-251. https://doi.org/10.12989/was.1999.2.3.201
  26. Kunnath, S. (2006), "Application of the PEER PBEE Methodology to the I-880 Viaduct", Report No. 2006/10, University of California, Davis, U.S.A.
  27. Kwok, K.C.S., Burton, M.D. and Abdelrazaq, A.K. (2015), "Wind-induced motion of tall buildings: Designing for habitability", Ame. Soc. Civil Eng. (ASCE), 1-66. https://doi.org/10.1061/9780784413852.
  28. Le, V. and Caracoglia, L. (2019), "Computationally efficient stochastic approach for the fragility analysis of vertical structures subjected to thunderstorm downburst winds", Eng. Struct., 176, 152-169. https://doi.org/10.1016/j.engstruct.2018.03.007.
  29. NERACOOS (2017), "Northeastern regional association of coastal and ocean observing systems, http://www.neracoos.org.
  30. Palmeri, A., Ricciardelli, F., Muscolino, G. and De Luca, A. (2004), "Effects of viscoelastic memory on the buffeting response of tall buildings", Wind Struct., 7(2), 89-106. https://doi.org/10.12989/was.2004.7.2.089.
  31. PEER-TBI (2010), "Tall buildings initiative, guidelines for performance-based seismic design of tall buildings", Report No. 2010/05, TBI Guidelines Working Group, PEER Center, University of Berkeley, California, U.S.A.
  32. Pozzuoli, C., Bartoli, G., Peil, U. and Clobes, M. (2013), "Serviceability wind risk assessment of tall buildings including aeroelastic effects", J. Wind Eng. Ind. Aerod., 123, 325-38. https://doi.org/10.1016/j.jweia.2013.09.014.
  33. Qiusheng, L., Hong, C., Guiqing, L., Shujing, L. and Dikai, L. (1999), "Optimal design of wind-induced vibration control of tall buildings and high rise structures", Wind Struct., 2(1), 69-83. https://doi.org/10.12989/was.1999.2.1.069.
  34. Ricciardelli, F. (1999), "Linear model for structures with tuned mass dampers", Wind Struct., 2(3), 151-171. https://doi.org/10.12989/was.1999.2.3.151.
  35. Ross, A.S., El Damatty, A.A. and El Ansary, A.M. (2015), "Application of tuned liquid dampers in controlling the torsional vibration of high rise buildings", Wind Struct. 21(5), 537-564. http://dx.doi.org/10.12989/was.2015.21.5.000.
  36. Said, E. and Matsagar, V. (2018), "Wind response control of tall buildings with a tuned mass damper", J. Build. Eng., 15, 51-60. https://doi.org/10.1016/j.jobe.2017.11.005.
  37. Simiu, E. (2011), "Design of buildings for wind: A guide for ASCE 7-10 standard users and designers of special structures", John Wiley & Sons, Inc., New Jersey. U.S.A.
  38. Simiu, E. and Yeo, D. (2015), "Advances in the design of high-rise structures by the wind tunnel procedure: Conceptual framework", Wind Struct., 21(5), 489-503. http://dx.doi.org/10.12989/was.2015.21.5.489.
  39. Sivanandam S. and Deepa S. (2008), "Genetic Algorithm Optimization Problems. In: Introduction to Genetic Algorithms". Springer, Berlin, Germany.
  40. Tallin, A. and Ellingwood, B. (1985), "Analysis of torsional moments on tall buildings", J. Wind Eng. Indus. Aerod., 18(2), 191-195. https://doi.org/10.1016/0167-6105(85)90097-2.
  41. Tse, K.T., Yu, X.J. and Hitchcock, P.A. (2014). "Evaluation of mode-shape linearization for HFBB analysis of real tall buildings", Wind Struct., 18(4), 423-441. http://dx.doi.org/10.12989/was.2014.18.4.423.
  42. Venanzi, I. (2015), "Robust optimal design of tuned mass dampers for tall buildings with uncertain parameters", Struct. Multidiscip. O., 51, 239-250. https://doi.org/10.1007/s00158-014-1129-4.
  43. Venanzi, I. and Materazzi, A.L. (2012). "Acrosswind aeroelastic response of square tall buildings: a semi-analytical approach based on wind tunnel tests on rigid models", Wind Struct., 15(6), 495-508. https://doi.org/10.12989/was.2012.15.6.495
  44. Venanzi, I. Fritz, W.P. and Simiu, E. (2006). "A database-assisted design approach for the assessment of wind induced torsional effects on tall buildings", Proceedings of the Structures Congress and Exposition.
  45. Venanzi, I., Lavan, O., Ierimonti, L. and Fabrizi, S. (2018), "Multi-hazard loss analysis of tall buildings under wind and seismic loads", Struct. Infrastruct. Eng., 14(10), 1295-1311. https://doi.org/10.1080/15732479.2018.1442482.
  46. Wang, L., Zhao, X. and Zheng Y.M. (2016), "A combined tuned damper and an optimal design method for wind-induced vibration control of super tall buildings", Struct. Des. Tall Spec. Build., 25(10), 468-502. https://doi.org/10.1002/tal.1268.
  47. Warburton, G. (1982), "Optimum absorber parameters for various combination of response and excitation parameters", Earthq. Eng. Struct. Dyn., 10(3), 381-401. https://doi.org/10.1002/eqe.4290100304.
  48. Wen, Y.K. and Kang, Y.J. (2001), "Minimum building life-cycle cost design criteria. I: Methodology", J. Struct. Eng., 127(3), 330-337. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:3(330).
  49. Xie, J. and Garber, J. (2014), "HFFB technique and its validation studies", Wind Struct., 18(4), 375-389. https://doi.org/10.12989/was.2014.18.4.375.
  50. Xu, Y.L., Kwock, K.C.S. and Samaly, B., (1992), "Control of wind-induced tall building vibration by tuned mass damper". J. Wind Eng. Ind. Aerod., 40(1), 1-32. https://doi.org/10.1016/0167-6105(92)90518-F.
  51. Xu, Z. and Xie, J. (2015), "Assessment of across-wind responses for aerodynamic optimization of tall buildings", Wind Struct., 21(5), 505-521. https://doi.org/10.12989/was.2015.21.5.505.

피인용 문헌

  1. Field measurement-based wind-induced response analysis of multi-tower building with tuned mass damper vol.32, pp.2, 2020, https://doi.org/10.12989/was.2021.32.2.143