한국표면공학회지 (Journal of the Korean institute of surface engineering)

  • 제53권1호
  • /
  • Pages.29-35
  • /
  • 2020
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지
DOI QR코드

DOI QR Code

시편의 준비 방법 및 접촉저항이 알루미늄 합금의 아노다이징 피막 형성에 미치는 영향

Effects of Specimen Preparation Method and Contact Resistance on the Formation of Anodizing Films on Aluminum Alloys

  • 문성모 (재료연구소 표면기술연구본부)
  • Moon, Sungmo (Surface Technology Division, Korea Institute of Materials Science)
  • 투고 : 2020.02.22
  • 심사 : 2020.02.28
  • 발행 : 2020.02.29
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, five different specimen preparation methods were introduced and their advantages and disadvantages were presented. One of them, an epoxy mounting method has advantages of constant exposure area, ease of surface preparation without touching the specimen surface during polishing or cleaning, use of small amount of material and ease of specimen reuse by polishing or etching. However, in order to eliminate unexpected errors resulting from preferable reaction at the specimen/epoxy interface and contact resistance between the specimen and copper conducting line for electrical connection, it is recommended to cover the wall side of the specimen with porous anodic oxide films and to remain the contact resistance lower than 1 ohm. The increased contact resistance between the specimen and Cu conducting line appeared to result in increases of anodizing voltage and solution temperature during anodizing by which thickness and hardness of anodizing film on Al2024 alloy were drastically decreased and color of the films became more brightened.

키워드

참고문헌

  1. 정용수, 박영희, 장관섭, 문성모, 최진섭, 정윤미, 실용표면처리기술시리즈 제 5권 양극산화, 화신문화(주), (2014) 5.
  2. Sungmo Moon, Anodic Oxidation Treatment Methods of Metals, J. Kor. Inst. Surf. Eng. 51 (2018) 1-10. https://doi.org/10.5695/JKISE.2018.51.1.1
  3. Sanghyuck Moon, Sungmo Moon and Sugun Lim, Formation Characteristics of Hard Anodizing Films on 6xxx Aluminum Alloys, J. Kor. Inst. Surf. Eng. 52 (2019) 203-210.
  4. Sungmo Moon, Kihun Jeong, Sugun Lim. Formation Behavior of Anodic Oxide Films on Al 6061 Alloy in Sulfuric Acid Solution, J. Kor. Inst. Surf. Eng. 51 (2018) 393-399. https://doi.org/10.5695/JKISE.2018.51.6.393
  5. S. Moon, Y. Nam, C. Yang, Y. Jeong, Growth of anodic oxide films on AC2A alloy in sulphuric acid solution, Corrosion Science 53 (2011) 1547-155. https://doi.org/10.1016/j.corsci.2011.01.029
  6. T. Aerts, T. Dimogerontakis, I. De Graeve, J. Fransaer, H. Terryn, Influence of the anodizing temperature on the porosity and the mechanical properties of the porous anodic film, Surf. Coat. Technol 201 (2007) 7310-7317. https://doi.org/10.1016/j.surfcoat.2007.01.044
  7. S.-M. Moon and S.-I. Pyun, Growth Mechanism of Anodic Oxide Film on Pure Aluminium in Acidic and Alkaline Solutions, J. of Solid State Electrochemistry 2 (1998) 156-161. https://doi.org/10.1007/s100080050081
  8. S.-M. Moon and S.-I. Pyun, A review of Al anodizing, J. Corros. Sci. Soc. of Korea 26 (1997) 498-508.
  9. Y.-S. Kim, S.-I. Pyun, S.-M. Moon and J.-D. Kim, The Effects of Applied Potential and pH on the Electrochemical Dissolution of Barrier Layer in Porous Anodic Oxide Film on Pure Aluminium, Corrosion Science 38 (1996) 329-336. https://doi.org/10.1016/0010-938X(96)00131-X
  10. G. Knornschild, A. A. Poznyak, A. G. Karoza, A. Mozalev, Effect of the anodization conditions on the growth and volume expansion of porous alumina films in malonic acid electrolyte, Surface and Coatings Technology 275 (2015) 17-25. https://doi.org/10.1016/j.surfcoat.2015.04.030
  11. Daiki Nakajima, Tatsuya Kikuchi, Shungo Natsui, Ryosuke O. Suzuki, Growth behavior of anodic oxide formed by aluminum anodizing in glutaric and its derivative acid electrolytes, Applied Surface Science 321 (2014) 364-370. https://doi.org/10.1016/j.apsusc.2014.10.014
  12. Y. Ma, X. Zhou, G.E. Thompson, M. Curioni, P. Skeldon, X. Zhang, Z. Sun, Anodic film growth on Al-Li-Cu alloy AA2099-T8, Electrochim. Acta 80 (2012) 148-159. https://doi.org/10.1016/j.electacta.2012.06.126
  13. E. Matykina, R. Arrabal, A. Mohamed, P. Skeldon, G. E. Thompson, Plasma electrolytic oxidation of pre-anodized aluminium, Corrosion Science 51 (2009) 2897-2905. https://doi.org/10.1016/j.corsci.2009.08.004