한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제19권1호
  • /
  • Pages.72-80
  • /
  • 2020
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

오토바이의 머플러 형상별 구조적 안정성

Structural Safety by Shape of Motorcycle Muffler

  • 한문식 (계명대학교 기계자동차공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Han, Moonsik (Department of Mechanical and Automotive Engineering, Keimyung UNIV.) ;
  • Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
  • 투고 : 2019.09.10
  • 심사 : 2019.09.30
  • 발행 : 2020.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study performs structural and vibrational analyses on three models of motorcycle mufflers, A, B, and C, due to the pressure of exhaust gases. Model A is the common model seen on motorcycles, model B is a model with a longer outlet, and model C is a model with some curved outlets. This research shows that all models have sufficient strength at the given loading condition, and model A has the highest durability against vibration among three models. The appropriate configuration can be determined to be the most efficient by applying this result to the design of motorcycle muffler.

키워드

참고문헌

  1. Kim, J. Y., You, K. J., Gao, J. C. and Jung, Y. S., "Simulation of Structural Analysis of Fiber Guide for 4C MM Optical Fiber", The Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 75-80, 2017. https://doi.org/10.14775/ksmpe.2017.16.6.075
  2. Choo, S. W. and Jeong, S. H., "Structural and Dynamic Characteristic Analysis of a Feeder for an Automatic Assembly System of an LED Convergent Lighting Module", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 124-133, 2017. https://doi.org/10.14775/ksmpe.2016.16.1.124
  3. Choi, D. S., "Structural Analysis and Design of Small Wind Turbine Blade", The Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 85-91, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.085
  4. Cho, S. J., Han, J. W., Park, Y. J. and Lee, G. H., "Structural Analysis of a Planetary Gear Carrier in the Slewing Reducer for Tower Crane", The Korean Society of Manufacturing Process Engineers, Vol. 13, No. 5, pp. 1-7, 2014.
  5. Choi, S. Y., Kwon, D. G., Park, I. S., and Wang, D. H., "A Study on the Cutting Forces and Tool Deformation when Flat-ended Pocket Machining", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 2, pp. 28-33, 2017. https://doi.org/10.14775/ksmpe.2017.16.2.028
  6. Park, C. W., "Injection Molding and Structure Analysis of Inline Skate Frames Using FEA", Journal of the Korean Society of Mechanical Technology, Vol. 35, No. 11, pp. 1507-1514, 2011.
  7. Chun, S. Y., Seong, K. W., Park, H. I., Kim, I. S. and Kang, S. K., "Structure-Vibration Analysis of Electric Scooter Frame", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 1, pp. 116-121, 2016. https://doi.org/10.14775/ksmpe.2016.15.1.116
  8. Lee, J. S., "Structural Analysis of a 24 Person Elevator Emergency Brake", Journal of the Korea Convergence Society, Vol. 9, No. 12, pp. 189-194, 2018. https://doi.org/10.15207/JKCS.2018.9.12.189
  9. Lee, J. H. and Cho, J. U., "Study on Convergence Technique through Structural Analysis due to the Height of the Walker", Journal of the Korea Convergence Society, Vol. 6, No. 2, pp. 19-24, 2015. https://doi.org/10.15207/JKCS.2015.6.2.019
  10. Her, Y. Y. and Yang, Y. J., "Structural Analysis on Development of Roller Jig for Peeling Machine", Journal of the Korean Society of Mechanical Technology, Vol. 19, No. 2, pp. 242-248, 2017. https://doi.org/10.17958/ksmt.19.2.201704.242
  11. Cha, J. M., Byun, S. J. Wang, Z. H. and Kwon, Y. C., "Study on Structural and Fatigue Analysis according to Shape change of Automatic Press", Journal of the Korean Society of Mechanical Technology, Vol. 19, No. 2, pp. 156-161, 2017. https://doi.org/10.17958/ksmt.19.2.201704.156
  12. Lee, D. H. and Cho, J. U., "Convergence Study on Damage of the Bonded Part at TDCB Structure with the Laminate Angle Manufactured with CFRP", Journal of the Korea Convergence Society, Vol. 9. No, 12. pp. 175-180, 2018. https://doi.org/10.15207/JKCS.2018.9.12.175
  13. Park, J. W., "Structural Analysis of a Tractor Cabin Considering Structure Production Error," Journal of the Korea Convergence Society, Vol. 8, No. 5, pp. 155-160, 2017. https://doi.org/10.15207/JKCS.2017.8.1.155
  14. Ryu, J. M., Park, K. C. and Kang, T. W., "A Study on the Structural Design for Safety Improvement of the Winch Mount of an Armored Recovery Vehicle", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 58-62, 2017. https://doi.org/10.14775/ksmpe.2016.16.1.058
  15. Ko, J. H. and Kang, D. M., "CAE Analysis on Strength and Fatigue of Rear Door of Passenger Car", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 3, pp. 63-69, 2014. https://doi.org/10.14775/ksmpe.2014.13.3.063
  16. Kim, D. B., Lee, G. T., Lee, I. H. and Cho, H. Y., "Finite Element Analysis for Fracture Criterion of PolyJet Materials", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 134-139, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.134
  17. Ha, S. H., Kim, S. J. and Song, J. I., "Structure Analysis and Torque Reduction Design of Industrial Ball Valve", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 6, pp. 37-45, 2014. https://doi.org/10.14775/ksmpe.2014.13.6.037