DOI QR코드

DOI QR Code

An ionic liquid incorporated gel polymer electrolyte for double layer capacitors

  • Perera, Kumudu S. (Polymer Electronics Research Group. Department of Electronics, Wayamba University of Sri Lanka) ;
  • Prasadini, K.W. (Polymer Electronics Research Group. Department of Electronics, Wayamba University of Sri Lanka) ;
  • Vidanapathirana, Kamal P. (Polymer Electronics Research Group. Department of Electronics, Wayamba University of Sri Lanka)
  • Received : 2019.10.23
  • Accepted : 2020.03.16
  • Published : 2020.03.25

Abstract

Energy storage devices have received a keen interest throughout the world due to high power consumption. A large number of research activities are being conducted on electrochemical double layer capacitors (EDLCs) because of their high power density and higher energy density. In the present study, an EDLC was fabricated using natural graphite based electrodes and ionic liquid (IL) based gel polymer electrolyte (GPE). The IL based GPE was prepared using the IL, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate (1E3MITF) with the polymer poly(vinyl chloride) (PVC) and the salt magnesium trifluoromethanesulfonate (Mg(CF3SO3)2 - MgTF). GPE was characterized by electrochemical impedance spectroscopy (EIS), DC polarization test, linear sweep voltammetry (LSV) test and cyclic voltammetry (CV) test. The maximum room temperature conductivity of the sample was 1.64 × 10-4 Scm-1. The electrolyte was purely an ionic conductor and the anionic contribution was prominent. Fabricated EDLC was characterized by EIS, CV and galvanostatic charge discharge (GCD) tests. CV test of the EDLC exhibits a single electrode specific capacitance of 1.44 Fg-1 initially and GCD test gives 0.83 Fg-1 as initial single electrode specific discharge capacitance. Moreover, a good stability was observed for prolonged cycling and the device can be used for applications with further modifications.

Keywords

Acknowledgement

Supported by : National Science Foundation Sri Lanka, Wayamba University of Sri Lanka

This work was financially supported by the National Science Foundation Sri Lanka (RG/2017/BS/02) and Wayamba University of Sri Lanka (SRHDC/RP/04/17/01).

References

  1. An, K.H., Kim, W.S., Park, Y.S., Moon, J.M., Bae, D.J., Lim, S.C., Lee, Y.S. and Lee, Y.H. (2001), "Electrochemical properties of high-power supercapacitors using single-walled carbon nanotube electrodes", Adv. Funt. Mater., 11(5), 387-392. https://doi.org/10.1002/1616-3028(200110)11:5%3C387::AID-ADFM387%3E3.0.CO;2-G.
  2. Arof, A.K., Aziz, M.F., Noor, M.M., Careem, M.A., Bandara, L.R.A.K., Thotawatthage, C.A., Rupasinghe, W.N.S. and Dissanayake, M.A.K.L. (2014), "Efficiency enhancement by mixed cation effect in dye-sensitized solar cells with a PVdF based gel polymer electrolyte", Int. J. Hydrogen Energy, 39, 2929-2935. https://doi.org/10.1016/j.ijhydene.2013.07.028.
  3. Bai, J., Lu, H., Cao, Y., Li, X. and Wang, J. (2017), "A novel ionic liquid polymer electrolyte for quasi-solid state lithium air batteries", RSC Adv., 7(49), 30603-30609. https://doi.org/10.1039/C7RA05035F.
  4. Bandara, T.M.W.J., Svensson, T., Dissanayake, M.A.K.L., Furlani, M., Jayasundara, W.J.M.J.S.R., Fernando, P.S.L., Albinsson, I. and Mellander, B.E. (2013), "Conductivity behaviour in novel quasi-solid-state electrolyte based on polyacrylonitrile and tetrahexylammonium iodide intended for dye sensitized solar cells", J. Natl. Sci. Found. Sri Lanka, 41(3), 175-184. https://doi.org/10.4038/jnsfsr.v41i3.6056.
  5. Bandaranayake, C.M., Jayathilake, Y.M.C.D., Vidanapathirana, K.P. and Perera, K.S. (2015), "Performance of a sodium thiocyanate based gel polymer electrolyte in redox capacitors", Sabaragamuwa Univ. J., 14(2), 149-161. https://doi.org/10.4038/suslj.vI4i2.7702.
  6. Cheng, X., Pan, J., Zhao, Y., Liao, M. and Peng, H. (2018), "Gel polymer electrolytes for electrochemical energy storage", Adv. Energy Mater., 8(7), 1-16. https://doi.org/10.1002/aenm.201702184.
  7. Gao, Z., Wang, F., Chang, J., Wu, D., Wang, X., Wang, X., Xu, F., Gao, S. and Jiang, K. (2014), "Chemically grafted graphene-polyaniline composite for application in supercapacitor", Electrochim. Acta, 133, 325-334. https://doi.org/10.1016/j.electacta.2014.04.033.
  8. Harankahawa, N.S., Weerasinghe, S., Vidanapathirana, K. and Perera, K. (2017), "nvestigation of a pseudo capacitor with polyacrylonitrile based gel polymer electrolyte", J. Electrochem. Sci. Technol., 8(2), 107-114. https://doi.org/10.5229/JECST.2017.8.2.107.
  9. Kang, J., Wen, J., Jayaram, S.H., Yu, A. and Wang, X. (2014), "Development of an equivalent circuit model for electrochemical double layer capacitors (EDLCs) with distinct electrolytes", Electrochim. Acta, 115, 587-598. https://doi.org/10.1016/j.electacta.2013.11.002.
  10. Kumar, D. and Hashmi, S.A. (2010), "Ionic liquid based sodium ion conducting gel polymer electrolytes", Solid State Ionics, 181(8-10), 416-423. https://doi.org/10.1016/j.ssi.2010.01.025.
  11. Kumar, G.G. and Sampath, S. (2003), "Electrochemical characterization of poly(vinylidenefluoride)-zinc triflate gel polymer electrolyte and its application in solid-state zinc batteries", Solid State Ionics, 160(3-4), 289-300. https://doi.org/10.1016/s0167-2738(03)00209-1.
  12. Kumar, Y., Hashmi, S.A. and Pandey, G.P. (2011), "Ionic liquid mediated magnesium ion conduction in poly(ethylene oxide) based polymer electrolyte", Electrochim. Acta, 56(11), 3864-3873. https://doi.org/10.1016/j.electacta.2011.02.035.
  13. Mei, B.A., Munteshari, O., Lau, J., Dunn, B. and Pilon, L. (2018), "Physical interpretations of Nyquist plots for EDLC electrodes and devices", J. Phys. Chem. C, 122(1), 194-206. https://doi.org/10.1021/acs.jpcc.7b10582.
  14. Osman, Z., Samin, S.M., Othman, L. and Isa, K.B.M. (2012), "Ionic transport in PMMA-NaCF3SO3 gel polymer electrolyte", Adv. Mater. Res., 545, 259-263. https://doi.org/10.4028/www.scientific.net/AMR.545.259.
  15. Pandey, G.P. and Rastogi, A.C. (2012), "Pulse polymerized poly(3,4- Ethylene Dioxythiophene) electrodes for solid-state supercapacitors with ionic liquid gel polymer electrolyte", Mater. Res. Soc. Symp. Proc., 1448, 13-18. https://doi.org/10.1149/2.047210jes.
  16. Pandey, G.P., Hashmi, S.A. and Kumar, Y. (2010a), "Performance studies of activated charcoal based electrical double layer capacitors with ionic liquid gel polymer electrolytes", Energy Fuel, 24(12), 6644-6652. https://doi.org/10.1021/ef1010447.
  17. Pandey, G.P., Kumar, Y. and Hashmi, S.A. (2010b), "Ionic liquid incorporated polymer electrolytes for supercapacitor application", Indian J. Chem. Sect. A Inorganic Phys. Theor. Anal. Chem., 49, 743-751.
  18. Prabaharan, S.R.S., Vimala, R. and Zainal, Z. (2006), "Nanostructured mesoporous carbon as electrodes for supercapacitors", J. Power Source., 161(1), 730-736. https://doi.org/10.1016/j.jpowsour.2006.03.074.
  19. Rajendran, S., Prabhu, M.R. and Rani, M.U. (2008), "Ionic conduction in poly(vinyl chloride)/poly(ethyl methacrylate)-based polymer blend electrolytes complexed with different lithium salts", J. Power Source., 180(2), 880-883. https://doi.org/10.1016/j.jpowsour.2008.02.063.
  20. Ramesh, S., Lu, S.C. and Vankelecom, I. (2013), "BMIMTf ionic liquid-assisted ionic dissociation of MgTf in P(VdF-HFP)-based solid polymer electrolytes", J. Phys. Chem. Solids, 74(10), 1380-1386. https://doi.org/10.1016/j.jpcs.2013.04.017.
  21. Rosdi, A., Zainol, N.H. and Osman, Z. (2016), "Ionic transport and electrochemical stability of PVDF-HFP based gel polymer electrolytes", AIP Conf. Proc., 1711(1), 0500031-0500036. https://doi.org/10.1063/1.4941629.
  22. Song, M.K., Kim, Y.T., Cho, B.W., Popov, B.N. and Rhee, H.W. (2003), "Thermally stable gel polymer electrolytes", J. Electrochem. Soc., 150(4), A439-A444. https://doi.org/10.1149/1.1556592.
  23. Syahidah, S.N. and Majid, S.R. (2015), "Ionic liquid-based polymer gel electrolytes for symmetrical solid-state electrical double layer capacitor operated at different operating voltages", Electrochim. Acta, 175, 184-192. https://doi.org/10.1016/j.electacta.2015.02.215.
  24. Tafur, J.P., Santos, F. and Fernandez Romero, A.J. (2015), "Influence of the ionic liquid type on the gel polymer electrolytes properties", Membranes, 5(4), 752-771. https://doi.org/10.3390/membranes 5040752.
  25. Tey, J.P, Careem, M.A., Yarmo, M.A. and Arof, A.K. (2016), "Durian shell-based activated carbon electrode for EDLCs", Ionics, 22(7), 1209-1216. https://doi.org/110.1007/s11581-016-1640-2.
  26. Voigt, N. and Van Wullen, L. (2012), "The mechanism of ionic transport in PAN-based solid polymer electrolytes", Solid State Ionics, 208, 8-16. https://doi.org/10.1016/j.ssi.2011.11.031.
  27. Wang, W., Guo, S., Penchev, M., Ruiz, I., Bozhilov, K.N., Yan, D., Ozkan, M. and Ozkan, C.S. (2013), "Three dimensional few layer graphene and carbon nanotube foam architectures for high fidelity supercapacitors", Nano Energy, 2(2), 294-303. https://doi.org/10.1016/j.nanoen.2012.10.001.