DOI QR코드

DOI QR Code

Bayesian demand model based seismic vulnerability assessment of a concrete girder bridge

  • Bayat, M. (Department of Civil and Environmental Engineering, University of South Carolina) ;
  • Kia, M. (Department of Civil Engineering, University of Science and Technology of Mazandaran) ;
  • Soltangharaei, V. (Department of Civil and Environmental Engineering, University of South Carolina) ;
  • Ahmadi, H.R. (Department of Civil Engineering, Faculty of Engineering, University of Maragheh) ;
  • Ziehl, P. (Department of Civil and Environmental Engineering, University of South Carolina)
  • Received : 2019.09.28
  • Accepted : 2020.02.21
  • Published : 2020.04.25

Abstract

In the present study, by employing fragility analysis, the seismic vulnerability of a concrete girder bridge, one of the most common existing structural bridge systems, has been performed. To this end, drift demand model as a fundamental ingredient of any probabilistic decision-making analyses is initially developed in terms of the two most common intensity measures, i.e., PGA and Sa (T1). Developing a probabilistic demand model requires a reliable database that is established in this paper by performing incremental dynamic analysis (IDA) under a set of 20 ground motion records. Next, by employing Bayesian statistical inference drift demand models are developed based on pre-collapse data obtained from IDA. Then, the accuracy and reasonability of the developed models are investigated by plotting diagnosis graphs. This graphical analysis demonstrates probabilistic demand model developed in terms of PGA is more reliable. Afterward, fragility curves according to PGA based-demand model are developed.

Keywords

Acknowledgement

Supported by : South Carolina Department of Transportation (SCDOT)

This research is partially supported by the South Carolina Department of Transportation (SCDOT) under Project SPR 739.

References

  1. Alam, J., Kim, D. and Choi, B. (2017), "Uncertainty reduction of seismic fragility of intake tower using Bayesian Inference and Markov Chain Monte Carlo simulation", Struct. Eng. Mech., 63(1), 47-53. https://doi.org/10.12989/sem.2017.63.1.047.
  2. Alam, J., Kim, D. and Choi, B. (2019), "Seismic risk assessment of intake tower in Korea using updated fragility by Bayesian inference", Struct. Eng. Mech., 69(3), 317-326. https://doi.org/10.12989/sem.2019.69.3.317.
  3. Bai, J.W., Gardoni, P. and Hueste, M.B.D. (2011), "Story-specific demand models and seismic fragility estimates for multi-story buildings", Struct. Saf., 33(1), 96-107. https://doi.org/10.1016/j.strusafe.2010.09.002.
  4. Bayat, M., Daneshjoo, F. and Nistico, N. (2015a), "Probabilistic sensitivity analysis of multi-span highway bridges", Steel Compos. Struct., 19(1), 237-262. http://dx.doi.org/10.12989/scs.2015.19.1.237.
  5. Bayat, M., Daneshjoo, F. and Nistico, N. (2015b), "A novel proficient and sufficient intensity measure for probabilistic analysis of skewed highway bridges", Struct. Eng. Mech., 55(6), 1177-1202. http://dx.doi.org/10.12989/sem.2015.55.6.1177.
  6. Box, G.E. and Tiao, G.C. (2011), Bayesian Inference in Statistical Analysis, Vol 40, John Wiley & Sons
  7. Chen, L. and Chen, S. (2016), "Seismic fragility performance of skewed and curved bridges in low-to-moderate seismic region", Earthq. Struct., 10(4), 789-810. https://doi.org/10.12989/eas.2016.10.4.789.
  8. Choe, D.E., Gardoni, P., Rosowsky, D. and Haukaas, T. (2008), "Probabilistic capacity models and seismic fragility estimates for RC columns subject to corrosion", Reliab. Eng. Syst. Saf., 93(3), 383-393. https://doi.org/10.1016/j.ress.2006.12.015.
  9. Choi, E. (2002), "Seismic analysis and retrofit of mid-America bridges", School of Civil and Environmental Engineering, Georgia Institute of Technology.
  10. Cimerallo, G.P., Reinhorn, A.M. and Bruneau, M. (2010), "Framework for analytical quantification of disaster resilience", Eng. Struct., 32(11), 3639-3649. https://doi.org/10.1016/j.engstruct.2010.08.008.
  11. Cui, S., Guo, C., Su, J., Cui, E. and Liu, P. (2019), "Seismic fragility and risk assessment of high-speed railway continuous-girder bridge under track constraint effect", Bull. Earthq. Eng., 17(3), 1639-1665. https://doi.org/10.1007/s10518-018-0491-9.
  12. Dukes, J., Mangalathu, S., Padgett, J.E. and DesRoches, R. (2018), "Development of a bridge-specific fragility methodology to improve the seismic resilience of bridges", Earthq. Struct., 15(3), 253-261. https://doi.org/10.12989/eas.2018.15.3.253.
  13. FEMA (2003), HAZUS-MH MR1: Technical Manual, Federal Emergency Management Agency Washington, DC.
  14. FEMA (2009), Quantification of Building Seismic Performance Factors, FEMA P695, Washington, DC.
  15. Gardoni, P., Der Kiureghian, A. and Mosalam, K.M. (2002), "Probabilistic capacity models an and d fragility estimates for reinforced concrete columns based on experimental observations", J. Eng. Mech., 128(10), 1024-1038. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:10(1024).
  16. Gkatzogias, K.I. and Kappos, A.J. (2015), "Deformation-based seismic design of concrete bridges", Earthq. Struct., 9(5), 1045-1067. https://doi.org/10.12989/eas.2015.9.5.1045.
  17. Haukaas, T. (2008), "Unified reliability and design optimization for earthquake engineering", Prob. Eng. Mech., 23(4), 471-481. https://doi.org/10.1016/j.probengmech.2007.10.008.
  18. Hwang, H., Liu, J.B. and Chiu, Y.H. (2001), "Seismic fragility analysis of highway bridges", Mid-America Earthquake Center CD Release 01-06.
  19. Jalayer, F., De Risi, R. and Manfredi, G. (2015), "Bayesian cloud analysis: Efficient structural fragility assessment using linear regression", Bull. Earthq. Eng., 13(4), 1183-1203. https://doi.org/10.1007/s10518-014-9692-z.
  20. Jeon, J.S., Choi, E. and Noh, M.H. (2017), "Fragility characteristics of skewed concrete bridges accounting for ground motion directionality", Struct. Eng. Mech., 63(5), 647-657. https://doi.org/10.12989/sem.2017.63.5.647.
  21. Jeon, J.S., Mangalathu, S. and Lee, S.Y. (2019), "Seismic fragility curves for California concrete bridges with flared two-column bents", Bull. Earthq. Eng., 17(7), 4299-4319. https://doi.org/10.1007/s10518-019-00621-4.
  22. Kia, M. and Banazadeh, M. (2016), "Closed-form fragility analysis of the steel moment resisting frames", Steel Compos. Struct., 21(1), 93-107. http://dx.doi.org/10.12989/scs.2016.21.1.093.
  23. Kia, M., Banazadeh, M. and Bayat, M. (2018), "Rapid seismic vulnerability assessment by new regression-based demand and collapse models for steel moment frames", Earthq. Struct., 14(3), 203-214. https://doi.org/10.12989/eas.2018.14.3.203.
  24. Kwag, S., Oh, J., Lee, J.M. and Ryu, J.S. (2017), "Bayesian-based seismic margin assessment approach: Application to research reactor", Earthq. Struct., 12(6), 653-663. https://doi.org/10.12989/eas.2017.12.6.653.
  25. Muntasir Billah, A. and Alam, M.S. (2015), "Seismic fragility assessment of concrete bridge pier reinforced with super elastic shape memory alloy", Earthq. Spectra, 31(3), 1515-1541. https://doi.org/10.1193/112512EQS337M.
  26. Nielson, B.G. (2005), "Analytical fragility curves for highway bridges in moderate seismic zones", Georgia Institute of Technology.
  27. O'Reilly, G.J. and Sullivan, T.J. (2016), "Fragility functions for eccentrically braced steel frame structures", Earthq. Struct., 10(2), 367-388. https://doi.org/10.12989/eas.2016.10.2.367.
  28. Parghi, A. and Alam, M.S. (2017), "Seismic collapse assessment of non-seismically designed circular RC bridge piers retrofitted with FRP composites", Compos. Struct., 160, 901-916. https://doi.org/10.1016/j.compstruct.2016.10.094.
  29. Sisi, A.A., Erberik, M.A. and Askan, A. (2018), "The effect of structural variability and local site conditions on building fragility functions", Earthq. Struct., 14(4), 285-295. https://doi.org/10.12989/eas.2018.14.4.285.
  30. Soltangharaei, V., Razi, M. and Gerami, M. (2016), "Comparative evaluation of behavior factor of SMRF structures for near and far fault ground motions", Periodica Polytechnica Civil Eng., 60(1), 75-82. https://doi.org/10.3311/PPci.7625.
  31. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141.
  32. Wang, X., Shafieezadeh, A. and Ye, A. (2018), "Optimal intensity measures for probabilistic seismic demand modeling of extended pile-shaft-supported bridges in liquefied and laterally spreading ground", Bull. Earthq. Eng., 16(1), 229-257. https://doi.org/10.1007/s10518-017-0199-2.
  33. Zhang, J. and Huo, Y. (2009) "Evaluating effectiveness and optimum design of isolation devices for highway bridges using the fragility function method", Eng. Struct., 31(8), 1648-1660. https://doi.org/10.1016/j.engstruct.2009.02.017.

Cited by

  1. Fragility-based performance evaluation of mid-rise reinforced concrete frames in near field and far field earthquakes vol.76, pp.6, 2020, https://doi.org/10.12989/sem.2020.76.6.751
  2. A New Vehicle-Bridge Coupling Analysis Method Based on Model Polycondensation vol.25, pp.1, 2020, https://doi.org/10.1007/s12205-020-0383-9
  3. Influence of site conditions on structural vulnerability of a super high three-tower cable-stayed bridge vol.34, 2021, https://doi.org/10.1016/j.istruc.2021.10.018