Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Shrinkage Characteristics of Cement-Based Composites by Extrusion and Lamination Process of Construction 3D Printing

건설용 3D 프린팅 압출 및 적층공정에 따른 시멘트계 복합재료의 수축 특성 영향

  • 이호재 (한국건설기술연구원 노후인프라센터) ;
  • 김원우 (한국건설기술연구원 인프라안전연구본부) ;
  • 서은아 (한국건설기술연구원 인프라안전연구본부) ;
  • 문재흠 (한국건설기술연구원 인프라안전연구본부)
  • Received : 2020.10.25
  • Accepted : 2020.11.05
  • Published : 2020.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to evaluate the shrinkage characteristics of the cement-based composite for 3D printing construction, and to evaluate the shrinkage before/after extrusion and after printing during the printing process. As a result of evaluating the compressive strength by curing age of OPC-mix and printing-mix, similar trends were shown until 7 days of age, but the maximum shrinkage of 252 ㎛/m was larger in the case of OPC-mix compared to printing-mix. During the printing process, the compressive strength of the cementitious composite material after extrusion was about 6.5 MPa lower than the material before extrusion until the 7th day of age, but the level of strength on the 28th day of age was similar. As for the shrinkage characteristics, the result of shrinkage after printing showed greater shrinkage in the range of 220-260 ㎛/m compared to the result of shrinkage before extrusion.

본 연구의 목적은 적층 시공을 위해 개발한 시멘트계 복합재료 배합의 수축특성을 평가하며, 출력공정 중 압출 전/후, 적층 후의 수축을 평가하는데 있다. OPC배합과 프린팅 배합의 재령별 압축강도를 평가한 결과 재령 7일까지 유사한 경향을 보였으나, OPC 배합의 경우 프린팅 배합과 비교하여 최대 252 ㎛/m 수축이 더 크게 나타났다. 출력공정 중 압출 후 재료의 압축강도는 압출 전 재료보다 재령 7일차까지 약 6.5 MPa 낮았으나, 재령 28일에는 동등 수준의 강도가 발현되었다. 수축특성은 적층 이후 재료의 수축 측정 결과 압출 전 재료와 비교하여 220-260 ㎛/m 범위로 수축이 더 크게 나타났다.

Keywords

References

  1. Buswell R. et al. (2020) Inspection Methods for 3D Concrete Printing. In: Bos F., Lucas S., Wolfs R., Salet T. (eds) Second RILEM International Conference on Concrete and Digital Fabrication. DC 2020. RILEM Bookseries, vol 28. Springer, Cham.
  2. Kwon, S. H., & Kim, J. K. (2016). Understanding of Drying Shrinkage and Autogeneous Shrinkage in Concrete. Magazine of the Korea Concrete Institute, 28(6), 22-26.
  3. KCS 14 20 12 (2018) 콘크리트 표준시방서, 콘크리트 공사, 거푸집 및 동바리
  4. Jo, J., Jo, B., Cho, W., & Kim, J.-H. (2020). Development of a 3D Printer for Concrete Structures: Laboratory Testing of Cementitious Materials. International Journal of Concrete Structures and Materials. 14. 13. 10.1186/s40069-019-0388-2.
  5. Moelich, G. M., Kruger, J., & Combrinck, R. (2020). Plastic shrinkage cracking in 3D printed concrete. Composites Part B: Engineering, 200, 108313. https://doi.org/10.1016/j.compositesb.2020.108313
  6. Federowicz, K., Kaszynska, M., Zielinski, A., & Hoffmann, M. (2020). Effect of Curing Methods on Shrinkage Development in 3D-Printed Concrete. Materials, 13(11), 2590. https://doi.org/10.3390/ma13112590
  7. Lee, H., Kim, K.-H., Yoo, B.-H., Kim, W.-W., & Moon, J.-H. (2019a). Shrinkage Characteristic of Cementitious Composite Materials for Additive Manufacturing, Korea Institute for Structural Maintenance Inspection, 23(6), 99-104.
  8. Lee, D. G., Yoo, B. H., & Son, H. J. (2019). Development of Shrinkage Reducing Agent for 3D Printing Concrete. Journal of the Korea Academia-Industrial cooperation Society, 20(12), 37-43. https://doi.org/10.5762/KAIS.2019.20.12.37
  9. Mastali, M., Kinnunen, P., Dalvand, A., Firouz, R. M., & Illikainen, M. (2018). Drying shrinkage in alkali-activated binders-a critical review. Construction and Building Materials, 190, 533-550. https://doi.org/10.1016/j.conbuildmat.2018.09.125
  10. Medjigbodo, G., Roziere, E., Charrier, K., Izoret, L., & Loukili, A. (2018). Hydration, shrinkage, and durability of ternary binders containing Portland cement, limestone filler and metakaolin. Construction and Building Materials, 183, 114-126. https://doi.org/10.1016/j.conbuildmat.2018.06.138
  11. Feng, P., Meng, X., Chen, J. F., & Ye, L. (2015). Mechanical properties of structures 3D printed with cementitious powders. Construction and Building Materials, 93, 486-497. https://doi.org/10.1016/j.conbuildmat.2015.05.132
  12. Lee, H., Kim, J. H. J., Moon, J. H., Kim, W. W., & Seo, E. A. (2019b). Evaluation of the Mechanical Properties of a 3D-Printed Mortar. Materials, 12(24), 4104. https://doi.org/10.3390/ma12244104
  13. ASTM C 39. (2020) Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens