DOI QR코드

DOI QR Code

Experimental study for ZnO nanofibers effect on the smart and mechanical properties of concrete

  • Arbabi, Amir (Department of Civil Engineering, Jasb Branch, Islamic Azad University) ;
  • Kolahchi, Reza (Institute of Research and Development, Duy Tan University) ;
  • Bidgoli, Mahmood Rabani (Department of Civil Engineering, Jasb Branch, Islamic Azad University)
  • Received : 2018.12.25
  • Accepted : 2019.08.28
  • Published : 2020.01.25

Abstract

Due to the superior properties of nanoparticles, using them has been increased in concrete production technology. In this study, the effect of zinc oxide (ZnO) nanoparticles on the mechanical and smart properties of concrete was studied. At the first, the ZnO nanoparticles are dispersed in water using shaker, magnetic stirrer and ultrasonic devices. The nanoparticles with 3.5, 0.25, 0.75, and 1.0 volume percent are added to the concrete mixture and replaced by the appropriate amount of cement to compare with the control sample without any additives. In order to study the mechanical and smart properties of the concrete, the cubic samples for determining the compressive strength and cylindrical samples for determining tensile strength with different amounts of ZnO nanoparticles are produced and tested. The most important finding of this paper is about the smartness of the concrete due to the piezoelectric properties of the ZnO nanoparticles. In other words, the concrete in this study can produce the voltage when subjected to mechanical load and vice versa it can induce the mechanical displacement when subjected to external voltage. The experimental results show that the best volume percent for ZnO nanoparticles in 28-day samples is 0.5%. In other words, adding 0.5% ZnO nanoparticles to the concrete instead of cement leads to increases of 18.70% and 3.77% in the compressive and tensile strengths, respectively. In addition, it shows the best direct and reverse piezoelectric properties. It is also worth to mention that adding 3.5% zinc oxide nanoparticles, the setting of cement is stopped in the concrete mixture.

Keywords

References

  1. Abu Shayed, M., Hund, H., Dieter Hund, R. and Cherif, Ch. (2016), "Thermal and oxidation protection of carbon fiber by continuous liquid phase pre-ceramic coatings for high temperature application", Fiber. Polym., 17, 229-240. https://doi.org/10.1007/s12221-016-5689-3
  2. ACI 318-14 (2014), Building Code Requirements for Structural Concrete and Commentary, Americ. Concrete Inst., Farmingt. Hills, MI, USA.
  3. ACI 363R-10 (2010), Supersedes ACI 363R-92 and was adopted and published March, Americ. Concrete Inst.
  4. Arefi, M.R. and Rezaei-Zarchi, S. (2012), "Synthesis of zinc oxide nanoparticles and their effect on the compressive strength and setting time of self-compacted concrete paste as cementitious composites", Int. J. Molec. Sci., 134, 4340-4350. https://doi.org/10.3390/ijms13044340
  5. Bakhshandeh Amnieh, H. and Zamzam, M.S. (2018), "Dynamic analysis of the agglomerated $SiO_2$ nanoparticles-reinforced by concrete blocks with close angled discontinues subjected to blast load", Struct. Eng. Mech., Int. J., 65(1), 121-128. https://doi.org/10.12989/sem.2018.65.1.121
  6. Dagher, S., Ayesh, A.I. and Tit, N. (2014), "Influence of reactant concentration on optical properties of ZnO nanoparticles", Mater. Technol. Adv. Perform. Mater., 29, 76-82. https://doi.org/10.1179/1753555713Y.0000000100
  7. Dvorkin, D. and Peled, A. (2016), "Effect of reinforcement with carbon fabrics impregnated with nanoparticles on the tensile behavior of cement-based composites", Cem. Concrete Res., 85, 28-38. https://doi.org/10.1016/j.cemconres.2016.03.008
  8. Dylla, H. and Hassan, M.M. (2011), "Characterization of nanoparticles released during construction of photocatalytic pavements using engineered nanoparticles", J. Nanopart. Res., 14, 825-833. https://doi.org/10.1007/s11051-012-0825-5
  9. Chan, D.Q., Anh, V.T.T. and Duc, N.D. (2018), "Vibration and nonlinear dynamic response of eccentrically stiffened functionally graded composite truncated conical shells in thermal environments", Acta Mech., 230, 157-178. https://doi.org/10.1007/s00707-018-2282-4
  10. Chung, D.N., Dinh, N.N., Hui, D., Duc, N.D., Trung, T.Q. and Chipara, M. (2013), "Investigation of polymeric composite films using modified $TiO_2$ nanoparticles for organic light emitting diodes", J. Current Nanosci., 9, 14-20. https://doi.org/10.2174/157341313805118018
  11. Duc, N.D. (2014a), "Nonlinear static and dynamic stability of functionally graded plates and shells", Vietnam National University Press, Hanoi, Vietnam.
  12. Duc, N.D. (2014b), "Nonlinear dynamic response of imperfect eccentrically stiffened FGM double curved shallow shells on elastic foundation", Compos. Struct., 99, 88-96. https://doi.org/10.1016/j.compstruct.2012.11.017
  13. Duc, N.D. (2016), "Nonlinear thermal dynamic analysis of eccentrically stiffened S-FGM circular cylindrical shells surrounded on elastic foundations using the Reddy's third-order shear deformation shell theory", Eur. J. Mech. - A/Solids, 58, 10-30. https://doi.org/10.1016/j.euromechsol.2016.01.004
  14. Duc, N.D. and Minh, D.K. (2010), "Bending analysis of threephase polymer composite plates reinforced by glass fibers and Titanium oxide particles", J. Computat. Mat. Sci., 49, 194-198. https://doi.org/10.1016/j.commatsci.2010.04.016
  15. Duc, N.D., Quan, T.Q. and Nam, D. (2013), "A nonlinear stability analysis of imperfect three phase polymer composite plates", J. Mech. Compos. Mater., 49, 345-358. https://doi.org/10.1007/s11029-013-9352-4
  16. Duc, N.D., Hadavinia, H., Thu, P.V. and Quan, T.Q. (2015), "Vibration and nonlinear dynamic response of imperfect threephase polymer nanocomposite panel resting on elastic foundations under hydrodynamic loads", Compos. Struct., 131, 229-237. https://doi.org/10.1016/j.compstruct.2015.05.009
  17. Duc, N.D., Khoa, N.D. and Thiem, H.T. (2018), "Nonlinear thermo-mechanical response of eccentrically stiffened Sigmoid FGM circular cylindrical shells subjected to compressive and uniform radial loads using the Reddy's third-order shear deformation shell theory", Mech. Adv. Mat. Struct., 25, 1157-1167. https://doi.org/10.1080/15376494.2017.1341581
  18. Dutta, G., Panda. S.K., Mahapatra, T.R. and Singh, V.K. (2017), "Electro-magneto-elastic response of laminated composite plate: A finite element approach", Int. J. Appl. Computat. Math., 3, 2573-2592. https://doi.org/10.1007/s40819-016-0256-6
  19. Evora, V.M.F., Jain, N. and Shukla, A. (2005), "Stress intensity factor and crack velocity relationship for polyester/$TiO_2$ nanocomposites", Experim. Mech., 45, 153-159. https://doi.org/10.1007/BF02428188
  20. Heidari, A., Keikha, R., Salkhordeh Haghighi, M. and Hosseinabadi, H. (2018), "Numerical study for vibration response of concrete beams reinforced by nanoparticles", Struct. Eng. Mech., Int. J., 67(3), 311-316. https://doi.org/10.12989/sem.2018.67.3.311
  21. Jalal, M., Mortazavi, A.A. and Hassani, N. (2012), "Thermal properties of $TiO_2$ nanoparticles binary blended cementitious composites", J. Am. Sci., 8, 391-394.
  22. Kawashima, Sh., Ted Seo, J.W., Corr, D., Hersam, M.C. and Shah, S.P. (2014), "Dispersion of $CaCO_3$ nanoparticles by sonication and surfactant treatment for application in fly ash-cement systems", Mater. Struct., 47, 1011-1023. https://doi.org/10.1617/s11527-013-0110-9
  23. Mahapatra, T.R. and Panda, S.K. (2016), "Nonlinear free vibration analysis of laminated composite spherical shell panel under elevated hygrothermal environment: A micromechanical approach", Aerosp. Sci. Technol., 49, 276-288. https://doi.org/10.1016/j.ast.2015.12.018
  24. Mahapatra, T.R., Panda, S.K. and Kar, V.R. (2016a), "Nonlinear flexural analysis of laminated composite panel under hygrothermo-mechanical loading-A micromechanical approach", Int. J. Computat. Meth., 13, 1650015. https://doi.org/10.1142/S0219876216500158
  25. Mahapatra, T.R., Panda, S.K. and Kar, V.R. (2016b), "Nonlinear hygro-thermo-elastic vibration analysis of doubly curved composite shell panel using finite element micromechanical model", Mech. Adv. Mat. Struct., 23, 1343-1359. https://doi.org/10.1080/15376494.2015.1085606
  26. Mahapatra, T.R., Panda, S.K. and Kar, V.R. (2016c), "Geometrically nonlinear flexural analysis of hygro-thermoelastic laminated composite doubly curved shell panel", Int. J. Mech. Mat. Des., 12, 153-171. https://doi.org/10.1007/s10999-015-9299-9
  27. Mahi, A., Bedia, E.A.A. and Tounsi, A. (2015), "A new hyperbolic shear deformation theory for bending and free vibration analysis of isotropic, functionally graded, sandwich and laminated composite plates", Appl. Math. Model., 39, 2489-2508. https://doi.org/10.1016/j.apm.2014.10.045
  28. Meng, T., Yu, Y., Qian, X., Zhan, S. and Qian, K. (2012), "Effect of nano-$TiO_2$ on the mechanical properties of cement mortar", Construct. Build. Mat., 29, 241-245. https://doi.org/10.1016/j.conbuildmat.2011.10.047
  29. Miao, P., Liu, W. and Wang, Sh. (2017), "Improving microwave absorption efficiency of asphalt mixture by enriching $Fe_3O_4$ on the surface of steel slag particles", Mat. Struct., 50, 134-144. https://doi.org/10.1617/s11527-017-1001-2
  30. Nazari, A. and Riahi, Sh. (2011a), "The effects of $TiO_2$ nanoparticles on physical, thermal and mechanical properties of concrete using ground granulated blast furnace slag as binder", Mat. Sci. Eng.: A, 528, 2085-2092. https://doi.org/10.1016/j.msea.2010.11.070
  31. Nazari, A. and Riahi, S. (2011b), "Effects of CuO nanoparticles on compressive strength of self-compacting concrete", Sadhana, 363, 371-391. https://doi.org/10.1007/s12046-011-0023-7
  32. Oltulu, M. and Sahin, R. (2011), "Single and combined effects of nano-$SiO_2$ nano-$Al_2O_3$ and nano-$Fe_2O_3$ powders on compressive strength and capillary permeability of cement mortar containing silica fume", Mat. Sci. Eng. A, 528(22-23), 7012-7019. https://doi.org/10.1016/j.msea.2011.05.054
  33. Quan, T.Q., Tran, P., Tuan, N.D. and Duc, N.D. (2015), "Nonlinear dynamic analysis and vibration of shear deformable eccentrically stiffened S-FGM cylindrical panels with metal-ceramic-metal layers resting on elastic foundations", Compos. Struct., 126, 16-33. https://doi.org/10.1016/j.compstruct.2015.02.056
  34. Rakshit, S., Tripuraneni, R. and Nadimpalli, S.P.V. (2018), "Real-Time Stress Measurement in $SiO_2$ Thin Films during Electrochemical Lithiation/Delithiation Cycling", Experim. Mech., 58, 537-547. https://doi.org/10.1007/s11340-017-0371-2
  35. Singh, L.P., Goel, A., Bhattachharyya, S.K., Ahalawat, S., Sharma, U. and Mishra, G. (2015), "Effect of Morphology and Dispersibility of Silica Nanoparticles on the Mechanical Behaviour of Cement Mortar. Citation", Int. J. Concrete Struct. Mater., 9(2), 207-217. https://doi.org/10.1007/s40069-015-0099-2
  36. Spinazze, A., Cattaneo, A., Limonta, M., Bollati, V., Bertazzi, P.A. and Cavallo, D.M. (2016), "Titanium dioxide nanoparticles: occupational exposure assessment in the photocatalytic paving production", J. Nanopart. Res., 18, 151-166. https://doi.org/10.1007/s11051-016-3462-6
  37. Suman, S.D., Hirwani, C.K., Chaturvedi, A. and Panda, S.K. (2017), "Effect of magnetostrictive material layer on the stress and deformation behaviour of laminated structure", IOP Conference Series: Materials Science and Engineering, 178(1), 012026. https://doi.org/10.1088/1757-899X/178/1/012026
  38. Thu, P.V. and Duc, N.D. (2016), "Nonlinear dynamic response and vibration of an imperfect three-phase laminated nanocomposite cylindrical panel resting on elastic foundations in thermal environments", J. Sci. Eng. Compos. Mater. https://doi.org/10.1515/secm-2015-0467
  39. Vuong, P.M. and Duc, N.D. (2018), "Nonlinear response and buckling analysis of eccentrically stiffened FGM toroidal shell segments in thermal environment", Aerosp. Sci. Technol., 79, 383-398. https://doi.org/10.1016/j.ast.2018.05.058

Cited by

  1. A first-principle study of nonlinear large amplitude vibration and global optimization of 3D penta-graphene plates based on the Bees Algorithm vol.231, pp.9, 2020, https://doi.org/10.1007/s00707-020-02706-7