Smart Structures and Systems

  • 제25권1호
  • /
  • Pages.23-35
  • /
  • 2020
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Temperature analysis of a long-span suspension bridge based on a time-varying solar radiation model

  • Xia, Qi (Jiangsu Key Laboratory of Engineering Mechanics, Southeast University) ;
  • Liu, Senlin (Jiangsu Key Laboratory of Engineering Mechanics, Southeast University) ;
  • Zhang, Jian (Jiangsu Key Laboratory of Engineering Mechanics, Southeast University)
  • 투고 : 2018.08.21
  • 심사 : 2019.09.28
  • 발행 : 2020.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

It is important to take into account the thermal behavior in assessing the structural condition of bridges. An effective method of studying the temperature effect of long-span bridges is numerical simulation based on the solar radiation models. This study aims to develop a time-varying solar radiation model which can consider the real-time weather changes, such as a cloud cover. A statistical analysis of the long-term monitoring data is first performed, especially on the temperature data between the south and north anchors of the bridge, to confirm that temperature difference can be used to describe real-time weather changes. Second, a defect in the traditional solar radiation model is detected in the temperature field simulation, whereby the value of the turbidity coefficient tu is subjective and cannot be used to describe the weather changes in real-time. Therefore, a new solar radiation model with modified turbidity coefficient γ is first established on the temperature difference between the south and north anchors. Third, the temperature data of several days are selected for model validation, with the results showing that the simulated temperature distribution is in good agreement with the measured temperature, while the calculated results by the traditional model had minor errors because the turbidity coefficient tu is uncertainty. In addition, the vertical and transverse temperature gradient of a typical cross-section and the temperature distribution of the tower are also studied.

키워드

과제정보

연구 과제 주관 기관 : Jiangsu Distinguished Young Scholars Fund, National Science Foundation of China

참고문헌

  1. Abid, S.R., Mussa, F., Taysi, N. and O zakca, M. (2018), "Experimental and finite element investigation of temperature distributions in concrete-encased steel girders", Struct. Control Health Monit., 25(1), 1:23. https://doi.org/10.1002/stc.2042
  2. ANSYS 15 [Computer software]. Southpointe, PA, ANSYS.
  3. Branco, F.A. and Mendes, P.A. (1993), "Thermal actions for concrete bridge design", J. Struct. Eng., 119(8), 2313-2331. https://doi.org/10.1061/(ASCE)07339445(1993)119:8(2313)
  4. Chen, B., Chen, Z.W., Sun, Y.Z. and Zhao, S.L. (2013), "Condition assessment on thermal effects of a suspension bridge based on SHM oriented model and data", Math. Probl. Eng., 1-18. http://dx.doi.org/10.1155/2013/256816
  5. Chen, C.C., Wu, W.H., Liu, C.Y. and Lai, G.L. (2017), "Elimination of environmental temperature effect form the variation of stay cable force based on simple temperature measurements", Smart Struct. Syst., Int. J., 19(2), 137-149. https://doi.org/10.12989/sss.2017.19.2.137
  6. Dilger, W.H., Ghali, A., Chan, M., Cheung, M.S. and Maes, M.A. (1983), "Temperature stresses in composite box girder bridges", J. Struct. Eng., 109(6), 1460-1478. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:6(1460)
  7. Elbadry, M.M. and Ghali, A. (1983), "Temperature variation in concrete bridges", J. Struct. Eng., 109(10), 2355-2374. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:10(2355)
  8. Kim, S.H., Cho, K.I., Won, J.H. and Kim, J.H. (2009), "A study on thermal behaviour of curved steel box girder bridges considering solar radiation", Arch. Civil Mech. Eng., 9(3), 59-76. https://doi.org/10.1016/S1644-9665(12)60218-0
  9. Kim, H.Y., Kang, D.H and Kim, D.H. (2017), "Mechanical strength of FBG sensor exposed to cyclic thermal load for structural health monitoring", Smart Struct. Syst., Int. J., 19(3), 335-340. https://doi.org/10.12989/sss.2017.19.3.335
  10. Ko, J.M. and Ni, Y.Q. (2005), "Technology developments in structural health monitoring of large-scale bridges", Eng. Struct., 27(12), 1715-1725. https://doi.org/10.1016/j.engstruct.2005.02.021
  11. Li, S.S. (1996), Physics of Solar Energy, Capital Normal University Press, Beijing, China.
  12. Liu, H.B., Chen, Z.H. and Zhou, T. (2012), "Theoretical and Experimental Study on the Temperature Distribution of HShaped Steel Members under Solar Radiation", Appl. Thermal Eng., 37, 329-335. https://doi.org/10.1016/j.applthermaleng.2011.11.045
  13. Niu, Y.W., Zhao, Y., Qu, X.X., Yu, Q. and Huang, P.M. (2014), "The research of space temperature distribution in solid tower of extradosed cable-stayed bridge", Open Constr. Build. Technol. J., 8, 488-495. https://doi.org/10.2174/1874836801408010488
  14. Rohsenow, W.M., Hartnett, J.P. and Cho, Y.I. (1998), Handbook of Heat Transfer Applications, (Third Edition), McGraw-Hill, New York, NY, USA.
  15. Song, X.M., Melhem, H., Li, J., Xu, Q.Y. and Cheng, L.J. (2016), "Effects of solar temperature gradient on long-span concrete box girder during cantilever construction", J. Bridge Eng., 21(3), 04015061. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000844
  16. Threlkeld, J.L. (1970), Thermal Environmental Engineering, Prentice-Hall Inc., Englewood Cliffs, NJ, USA.
  17. Tian, Y., Zhang, N. and Xia, H. (2017), "Temperature effect on service performance of high-speed railway concrete bridges", Adv. Struct. Eng., 20(6) 865-883. https://doi.org/10.1177/1369433216665306
  18. Tong, M., Tham, L.G., Au, F.T.K. and Lee, P.K.K. (2001), "Numerical modeling for temperature distribution in steel bridges", Comput. Struct., 79(6), 583-593. https://doi.org/10.1016/S0045-7949(00)00161-9
  19. Wang, Y.B., Zhan, Y.L. and Zhao, R.D. (2016), "Analysis of thermal behavior on concrete box-girder arch bridges under convection and solar radiation", Adv. Struct. Eng., 19(7), 1043-1059. https://doi.org/10.1177/1369433216630829
  20. Westgate, R., Koo, K.Y. and Brownjohn, J. (2015), "Effect of solar radiation on suspension bridge performance", J. Bridge Eng., 20(5), 04014077. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000668
  21. Xia, Y., Chen, B., Zhou, X.Q. and Xu, Y.L. (2013), "Field monitoring and numerical analysis of tsing ma suspension bridge temperature behavior", Struct. Control Health Monit., 20(4), 560-575. https://doi.org/10.1002/stc.515
  22. Xia, Q., Cheng, Y.Y., Zhang, J. and Zhu, F.Q. (2017a), "In-service condition assessment of a long-span suspension bridge using temperature-induced strain data", J. Bridge Eng., 22(3), 04016124. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001003
  23. Xia, Q., Zhang, J., Tian, Y. and Zhang, Y.F. (2017b), "Experimental study of thermal effects on a long-span suspension bridge", J. Bridge Eng., 22(7), 04017034. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001083
  24. Xu, Y.L., Chen, B., Ng, C.L., Wong, K.Y. and Chan, W.Y. (2010), "Monitoring temperature effect on a long suspension bridge", Struct. Control Health Monit., 17(6), 632-653. https://doi.org/10.1002/stc.340
  25. Yang, X., Zhang, J. and Ren, W.X. (2017), "Temperature effect analysis of a long-span cable-stayed bridge based on extreme strain estimation", Smart Struct. Syst., Int. J., 20(1), 11-22. https://doi.org/10.12989/sss.2017.20.1.011
  26. Zhang, J., Wan, C.F. and Sato, T. (2013), "Advanced markov chain monte carlo approach for finite element calibration under uncertainty", Computer-Aided Civil Infrastruct. Eng., 28(7), 522-530. https://doi.org/10.1111/j.1467-8667.2012.00802.x
  27. Zhou, G.D. and Yi, T.H. (2013), "Thermal load large-scale bridges: a state-of-the-art review", Int. J. Distrib. Sensor Networks, 9(12), 1-17. https://doi.org/10.1155/2013/217983
  28. Zhou, Y., Sun, L.M. and Peng, Z.J. (2015), "Mechanisms of thermally induced deflection of a long-span cable-stayed bridge", Smart Struct. Syst., Int. J., 15(3), 505-522. http://dx.doi.org/10.12989/sss.2015.15.3.505
  29. Zhou, L.R., Xia, Y., Brownjohn, J.M.W. and Koo, K.Y. (2016), "Temperature analysis of a long-Span suspension bridge based on field monitoring and numerical simulation", J. Bridge Eng., 21(1), 04015027. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000786
  30. Zhu, J.S. and Meng, Q.L. (2017), "Effective and fine analysis for temperature effect of bridges in natural environments", J. Bridge Eng., 22(6), 04017017. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001039