DOI QR코드

DOI QR Code

A modified index for damage detection of structures using improved reduction system method

  • 투고 : 2018.07.28
  • 심사 : 2019.09.14
  • 발행 : 2020.01.25

초록

The modal strain energy method is one of the efficient methods for detecting damage in the structures. Due to existing some limitations in real-world structures, sensors can only be located on a limited number of degrees of freedom (DOFs) of a structure. Therefore, the mode shape values in all DOFs of structures cannot be measured. In this paper, a modified modal strain energy based index (MMSEBI) is introduced to locate damaged elements of structures when a limited number of sensors are used. The proposed MMSEBI is based on the reconstruction of mode shapes using Improved Reduction System (IRS) method. Therefore, in the first step by employing IRS method, mode shapes in slave degrees of freedom are estimated by those of master degrees of freedom. In the second step, the proposed MMSEBI is used to located damage elements. In order to evaluate the efficiency of the proposed method, two numerical examples are considered under different damage patterns considering the measurement noise. Moreover, the universal threshold based on statistical hypothesis testing principles is applied to damage index values. The results show the effectiveness of the proposed MMSEBI for the structural damage localization when comparing with the available damage index named MESBI. The results demonstrate that the presented method can be used as a practical strategy for structural damage identification, especially when a limited number of sensors are installed on the structure. Finally, the combination of MMSEBI and IRS method can provide a reliable tool to identify the location of damage accurately.

키워드

참고문헌

  1. Alves, M., Yu, J. and Jones, N. (2000), "On the elastic modulus degradation in continuum damage mechanics", Comput. Struct., 76(6), 703-712. https://doi.org/10.1016/S0045-7949(99)00187-X
  2. Asgarian, B., Amiri, M. and Ghafooripour, A. (2009), "Damage detection in jacket type offshore platforms using modal strain energy", Struct. Eng. Mech., Int. J., 33(3), 325-337. https://doi.org/10.12989/sem.2009.33.3.325
  3. Ashory, M.R., Ghasemi-Ghalebahman, A. and Kokabi, M.J. (2018), "An efficient modal strain energy-based damage detection for laminated composite plates", Adv. Compos. Mater., 27(2), 147-162. https://doi.org/10.1080/09243046.2017.1301069
  4. Ding Q., Zou, C., Tang, Y. and Zhang, S. (2013), "Damage detection in road and bridge based on modal strain energy method", Proceedings of the 4th International Conference on Transportation Engineering (ICTE 2013), Chengdu, China, pp. 1753-1758.
  5. Dinh-Cong, D., Vo-Duy, T., Ho-Huu, V., Dang-Trung, H. and Nguyen-Thoi, T. (2017), "An efficient multi-stage optimization approach for damage detection in plate structures", Adv. Eng. Softw., 112, 76-87. https://doi.org/10.1016/j.advengsoft.2017.06.015
  6. Dongyu, X., Cheng, X., Shifeng, H. and Minhua, J. (2010), "Identifying technology for structural damage based on the impedance analysis of piezoelectric sensor", Constr. Build. Mater., 24(12), 2522-2527. https://doi.org/10.1016/j.conbuildmat.2010.06.004
  7. Guan, H. and Karbhari, M. (2008), "Improved Damage Detection Method Based on Element Modal Strain Damage Index Using Sparse Measurement", J. Sound Vib., 309(3), 465-494. https://doi.org/10.1016/j.jsv.2007.07.060
  8. Guo, H.Y. and Li, Z.L. (2009), "A two-stage method to identify structural damage sites and extents by using evidence theory and micro-search genetic algorithm", Mech. Syst. Sig. Process., 23(3), 769-782. https://doi.org/10.1016/j.ymssp.2008.07.008
  9. Guyan, R.J. (1985), "Reduction of stiffness and mass matrices", AIAA Journal, 3(2), 380-380. https://doi.org/10.2514/3.2874
  10. Hu, H. and Wu, C. (2009), "Development of scanning Damage Index for the Damage Detection of Plate Structures using Modal strain Energy Method", Mech. Syst. Sig. Process., 23(2), 274-287. https://doi.org/10.1016/j.ymssp.2008.05.001
  11. Janeliukstis, R., Rucevskis, S., Wesolowski, M. and Chate, A. (2017), "Damage identification in beam structure based on thresholded variance of normalized wavelet scalogram", IOP Conference Series, 3rd International Conference on Innovative Materials, Structures and Technologies (IMST 2017), Riga, Latvia, September.
  12. Kaveh, A., Javadi, S.M. and Maniat, M. (2014), "Damage assessment via modal data with a mixed particle swarm strategy, Ray optimizer, and Harmony search", Asian J. Civil Eng. (BHRC), 15(1), 95-106.
  13. Kim, J.T., Ryu, Y.S., Cho, H.M. and Stubbs, N. (2003), "Damage identification in beam-type structures: frequency-based method vs mode-shape-based method", Eng. Struct., 25(1), 57-67. https://doi.org/10.1016/S0141-0296(02)00118-9
  14. Li, P., Zhu, H., Hui, L. and Shun, W. (2015), "Structural damage identification based on genetically trained ANNs in beams", Smart Struct. Syst., Int. J., 15(1), 227-244. https://doi.org/10.12989/sss.2015.15.1.227
  15. Li, Y., Wang, S., Zhang, M. and Zheng, C. (2016), "An Improved Modal Strain Energy Method for Damage Detection in Offshore Platform Structures", J. Mar. Sci. Appl., 15(2), 182-192. https://doi.org/10.1007/s11804-016-1350-1
  16. Liu, F., Li, H., Li, W. and Wang, B. (2014), "Experimental study of improved modal strain energy method for damage localization in jacket-type offshore wind turbines", Renew. Energy., 72, 174-181. https://doi.org/10.1016/j.renene.2014.07.007
  17. Moradipour, P., Chan, T.H.T. and Gallage, C. (2015), "An improved modal strain energy method for structural damage detection, 2D simulation", Struct. Eng. Mech., Int. J., 54(1), 105-119. https://doi.org/10.12989/sem.2015.54.1.105
  18. Nguyen, K.D., Chan, T.H.T. and Thambiratnam, D.P. (2016), "Structural damage identification based on change in geometric modal strain energy-eigenvalue ratio", Smart Mater. Struct., 25(7), 075032. https://doi.org/10.1088/0964-1726/25/7/075032
  19. O'Callahan J.C. (1989), "A procedure for an Improved Reduced System (IRS) model", Proceedings of the 7th International Modal Analysis Conference (IMAC 1989), Las Vegas, NV, USA, pp. 17-21.
  20. Seyedpoor, S.M. (2012), "A two stage method for structural damage detection using modal strain energy based index and particle swarm optimization", Int. J. Non Linear Mech., 47(1), 1-8. https://doi.org/10.1016/j.ijnonlinmec.2011.07.011
  21. Seyedpoor, S.M. and Montazer, M. (2016), "A two-stage damage detection method for truss structures using a modal residual based indicator and differential evolution algorithm", Smart Struct. Syst., Int. J., 17(2), 347-361. https://doi.org/10.12989/sss.2016.17.2.347
  22. Shi, Z.Y., Law, S.S. and Zhang, L.M. (1998), "Structural damage localization from modal strain energy change'', J. Sound Vib., 218(5), 825-844. https://doi.org/10.1006/jsvi.1998.1878
  23. Shi, Z.Y., Law, S.S. and Zhang, L.M. (2000a), "Structural damage detection from modal strain energy change", J. Eng. Mech., 126(12), 1216-1223. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1216)
  24. Shi, Z.Y., Law, S.S. and Zhang, L.M. (2000b), "Damage localization by directly using incomplete mode shapes", J. Eng. Mech., 126(6), 656-660. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:6(656)
  25. Shi, Z.Y., Law, S.S. and Zhang, L.M. (2002), "Improved damage quantification from elemental modal strain energy change", J. Eng. Mech., 128(5), 521-529. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:5(521)
  26. Shih, H.W., Thambiratnam, D.P. and Chan, T.H.T. (2009), "Vibration based structural damage detection in flexural members using multi-criteria approach", J. Sound Vib., 323(3-5), 645-661. https://doi.org/10.1016/j.jsv.2009.01.019
  27. Stubbs, N., Kim, J.T. and Topole, K. (1992), "An efficient and robust algorithm for damage localization in offshore platforms", Proceedings of the 10th ASCE Structures Congress, USA, March, pp. 543-546.
  28. Stubbs, N., Kim, J.T. and Farrar, C.R. (1995), "Field verification of a non-destructive damage localization and severity estimation algorithm", Proceedings of the 13th International Modal Analysis Conference (IMAC 1995), USA, pp. 210-218.
  29. Tan, Z.X., Thambiratnam, D.P., Chan, T.H.T. and Abdul Razak, H. (2017), "Detecting damage in steel beams using modal strain energy based damage index and Artificial Neural Network", Eng. Fail. Anal., 79, 253-262. https://doi.org/10.1016/j.engfailanal.2017.04.035
  30. Wahalthantri, B.L., Thambiratnam, D.P., Chan, T.H.T. and Fawzia, S. (2012), "An Improved method to detect damage using modal strain energy based damage index", Adv. Struct. Eng., 15(5), 727-742. https://doi.org/10.1260/1369-4332.15.5.727
  31. Wang, F.L., Chan, T.H.T., Thambiratnam, D.P. and Tan, A.C.C. (2010), "Damage detection for truss bridge structures using correlation-based structural modal strain energy", The Proceedings of the 8th International Conference on Short and Medium Span Bridges, Nia-gara Falls, ON, Canada, August.
  32. Wang, S., Zhang, M. and Liu, F. (2013), "Estimation of semi-rigid joints by cross modal strain energy method", Struct. Eng. Mech., Int. J., 47(6), 757-771. https://doi.org/10.12989/sem.2013.47.6.757
  33. Wu, S., Zhou, J., Rui, S. and Fei, Q. (2016), "Reformulation of elemental modal strain energy method based on strain modes for structural damage detection", Adv. Struct. Eng., 20(6), 896-905. https://doi.org/10.1177/1369433216665626
  34. Yan, W.J., Ren, W.X. and Huang, T.L. (2012), "Statistic structural damage detection based on the closed-form of element modal strain energy sensitivity", Mech. Syst. Signal Process., 28, 183-194. https://doi.org/10.1016/j.ymssp.2011.04.011
  35. Yazdanpanah, O., Seyedpoor, S.M. and Bengar, H.A. (2015). "A new damage detection indicator for beams based on mode shape data", Struct. Eng. Mech., Int. J., 53(4), 725-744. https://doi.org/10.12989/sem.2015.53.4.725.

피인용 문헌

  1. An effective method for damage assessment based on limited measured locations in skeletal structures vol.24, pp.1, 2020, https://doi.org/10.1177/1369433220947193