Advances in concrete construction

  • 제9권1호
  • /
  • Pages.9-22
  • /
  • 2020
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Rheological, physico-mechanical and durability properties of multi-recycled concrete

  • Rahmani, Abdessamed Azzaz (Faculty of Civil Engineering, University of Sciences and Technology Houari Boumediene (USTHB)) ;
  • Chemrouk, Mohamed (Faculty of Civil Engineering, University of Sciences and Technology Houari Boumediene (USTHB)) ;
  • Ammar-Boudjelal, Amina (Department of Civil Engineering, University of la Rochelle)
  • 투고 : 2019.04.02
  • 심사 : 2019.09.30
  • 발행 : 2020.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

The present work looks at the possibilities of recycling more than once demolished concrete as coarse aggregates, to produce new concrete. Different concrete mixes were made with substitutions of 50%, 75% and 100% of recycled concrete aggregates respectively as coarse aggregates. The physico-mechanical characterization tests carried out on the recycled concrete aggregates revealed that they are suitable for use in obtaining a structural concrete. The resulting concrete materials had rheological parameters, compressive strengths and tensile strengths very slightly lower than those of the original concrete even when 100% of two cycles recycled concrete aggregates were used. The durability of the recycled aggregates concrete was assessed through water permeability, water absorption and chemical attacks. The obtained concretes were thought fit for use as structural materials. A linear regression was developed between the strength of the material and the number of cycles of concrete recycling to anticipate the strength of the recycled aggregates concrete. From the results, it appear clear that recycling demolished concrete represents a valuable resource for aggregates supply to the concrete industry and a the same time plays a key role in meeting the challenge for a sustainable development.

키워드

참고문헌

  1. ACI (2011), Use of Recycled Concrete Aggregates, IR 19-4, American Concrete Institute, Farmington Hills, MI, USA.
  2. Adjoudj, M., Ezziane, K., Kadri, H., Ngo, T.T. and Kaci, A. (2014), "Evaluation of rheological parameters of mortar containing various amounts of mineral addition with polycarboxylate superplasticizer", Constr. Build. Mater., 70, 549-559. https://doi.org/10.1016/j.conbuildmat.2014.07.111.
  3. Ait Mohamed, A.A., Ezziane, K., Bougara, A. and Adjoudj, M. (2016), "Rheological and mechanical behaviour of concrete made with pre-saturated and dried recycled concrete aggregates", Constr. Build. Mater., 123, 300-308. https://doi.org/10.1016/j.conbuildmat.2016.06.107.
  4. Amorim, M., Gusmao, A., Maia, G. and Coutinho, R. (2013), "Plate load tests on improved ground with construction and demolition wastes compaction piles", Proceedings of the 5th International Young Geotechnical Engineers, Conference (5th Iygec), Paris, France, September.
  5. Ann, K.Y., Moon, H.Y., Kim, Y.B. and Ryou J. (2008), "Durability of recycled aggregate concrete using pozzolanic materials", Waste Manage., 28(6), 993-999. https://doi.org/10.1016/j.wasman.2007.03.003.
  6. Azzaz, R.A. and Chemrouk, M. (2014), "Proprietes Rheologiques et Physico-Mecaniques des Betons Recycles", Proceedings of INVACO 2014 (3eme Seminaire International Innovation et Valorisation en Genie Civil et Materiaux de Construction), Algiers, Algeria, November.
  7. Azzaz, R.A. and Chemrouk, M. (2014b), "Recycling high performances concrete", Proceedings of THERMAM 2014 (International Conference on Thermophysical and Mechanical Properties of Advances Materials), Izmir, Turkey, June.
  8. Bakharev, T., Sanjayan, J.G. and Cheng, Y.B. (2003), "Resistance of alkali-activated slag concrete to acide attack", Cement Concrete Res., 33(10), 1607-1611. https://doi.org/10.1016/S0008-8846(03)00125-X.
  9. Benosman, A.S. and Mouli, M. (2009), "Etude des materiaux composites mortier-polymere en milieux sulfatiques (na2so4, mgso4)", SBEIDCO-1st International Conference on Sustainable Built Environement Infrastructures in Developing Countries, Oran, Algeria, October.
  10. Boulekbeche, B., Hamrat, M., Chemrouk, M. and Amziane, S. (2015), "Failure mechanism of fibre reinforced concrete under splitting test using digital image correlation", Mater. Struct. J., 48(8), 2713-2726. https://doi.org/10.1617/s11527-014-0348-x.
  11. Chemrouk, M., Boulekbeche, B., Hamrat, M. and Amziane, S. (2013), "Improving the structural behaviour and the sustainability of high performances concrete with the addition of steel fibres", Acad. J. Sci. (AJS), 2(3), 359-377.
  12. Cheng-Chih, F., Ran, H., Howard, H. and Sao-Jeng, C. (2015), "The Effects of different fine recycled concrete aggregates on the properties of mortar", Mater., 8(5), 2658-2672. https://doi.org/10.3390/ma8052658.
  13. Corinaldesi, V. and Moriconi, G. (2010), "Recycling of rubble from building demolition for low shrinkage concretes", Waste Manage., 30(4), 655-659. https://doi.org/10.1016/j.wasman.2009.11.026.
  14. De Brito, G. and Nabajyoti, S. (2013), "Recycled aggregate in concrete: use of industrial construction and demolition waste", Green Energy and Technology, London.
  15. De Schutter, G. (2012), Damage to Concrete Structures, CRC Press, Taylor & Francis Group, Boca Raton, USA.
  16. Debieb, F. and Kenai, S. (2008), "The use of coarse and fine crushed bricks as aggregate in concrete", Constr. Build. Mater., 22(5), 886-893. https://doi.org/10.1016/j.conbuildmat.2006.12.013.
  17. Dreux, G. and Fista, J. (1995), Nouveau Guide du Beton, Eyrolles Publishers, Paris, France.
  18. El-Otaibi, S. and EL-Houary, M. (2005), "Potential for recycling demolished concrete and building rubbles", Achieving Sustainability in Constructions, Thomas Telford Publishing Group, Dundee, Scotland, UK, July.
  19. Ernst, W.E. and Markus, R. (2009), "Handbook of recycling: state of the art for practitioners, analysts and scientists", British Library Cataloguing-in-Publication Data, USA.
  20. Esteban, F.G., Javier, F.C. and Luis, M.L. (2017), "Study of the technical feasibility of increasing the amount of recycled concrete waste used in ready-mix concrete production", Mater., 10(7), 817. https://doi.org/10.3390/ma10070817.
  21. Folino, P. and Xargay, H. (2014), "Recycled aggregate concrete - Mechanical behaviour under uniaxial and triaxial compression", Constr. Build. Mater., 56, 21-31. https://doi.org/10.1016/j.conbuildmat.2014.01.073.
  22. Guo, H., Shi, C., Guan, X., Zhu, J., Ding, Y., Ling, T.C., Zhang H and Wang, Y. (2018), "Durability of recycled aggregate concrete", Cement Concrete Compos., 89, 251-259. https://doi.org/10.1016/j.conbuildmat.2012.11.106.
  23. Hansen, T.C. and Narud, H. (1983), "Strength of recycled concrete made from crushed concrete coarse aggregate", Concrete Int., 5(1), 79-83.
  24. Hearn, N., Detwiler, R.J. and Stramelic, C. (1994), "Water permeability and microstructure of three old concretes", Cement Concrete Res., 24(4), 633-640. https://doi.org/10.1016/0008-8846(94)90187-2.
  25. Hendriks, C. and Janssen, G. (2004), A New Vision on the Building Cycle, Aeneas Technical Publishers, Boxtel, Netherlands.
  26. Hong, Z., Bing, l., Qiang, S. and Shasha, Y. (2017), "Quantization on social cost of large-scale construction project based on energy analysis method", Proceedings of the 20th International Symposium on Advancement of Construction Management and Real Estate, Hangzhou, China
  27. Huan, M., YoLi, C., Wen-yu, Z. and Xian-jie, X. (2016), "Multi-Factor effects on the durability of recycled aggregate concrete", Proceedings of the international conference on Advanced Material Science and Engineering (AMSE2016), Shenzhen, China, July.
  28. Katz, A. (2003), "Properties of concrete made with recycled aggregate from partially hydrated old concrete", Cement Concrete Res., 33(5), 703-711. https://doi.org/10.1016/S0008-8846(02)01033-5.
  29. Kenai, S., Debieb, F. and Azzouz, L. (2002), "Mechanical properties and durability properties of concrete made with coarse and fine recycled aggregates", Sustainable Concrete Construction, Thomas Telford Publishing Group, London
  30. Khoshkenari, A.G., Shafigh, P., Moghimi, M. and Mahmud, H.B. (2014), "The role of 0-2 mm fine recycled concrete aggregate on the compressive and splitting tensile strengths of recycled concrete aggregate concrete", Mater. Des., 64, 345-354. https://doi.org/10.1016/j.matdes.2014.07.048.
  31. Kim, H. and Goulias, D.G. (2015), "Shrinkage behaviour of sustainable concrete with crushed returned concrete aggregate", Mater. Civil Eng., 27(7), 04014204. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001166.
  32. Koenders, E. A.B., Enzo, M., Marco, P. and Romildo, D.T.F. (2017), Generalised Mix Design Rules for Concrete with Recycled Aggregates, Springer International Publishing, 123-134.
  33. Kong, F.K. and Evans, R.H. (1987), Reinforced and Prestressed Concrete, Van Nostrand Reinholds Publisher, London.
  34. Kouider, D.O., Menadi, B., Wardeh, G. and Kenai, S. (2018), "Performance of self-compacting concrete made with coarse and fine recycled concrete aggregates and ground granulated blast-furnace slag", Adv. Concrete Constr., 6(2), 103-121. https://doi.org/10.12989/acc.2018.6.2.103.
  35. Li, R.Y.M. (2015), Construction Safety and Waste Management, Springer International Publishing, Hong Kong, China.
  36. Marco, P. (2015), "A conceptuel model for designing recycled aggregate concrete for structural applications", Springer Theses, University of Salerno, Italy.
  37. Mayuri, W., Priyan, M. and Robert, H.C. (2018), "Integrated assessment of the use of recycled concrete aggregate replacing natural aggregate in structural concrete", J. Clean. Produ., 174, 591-604. https://doi.org/10.1016/j.jclepro.2017.10.301.
  38. Mohamed, A.M.O. and El-gamal, M. (2017), "Sulfur concrete for the construction industry", J. Ross Publishing, El ain, United Arab Emirates.
  39. Nagaratnam, S., Carthigesu, T., Rabin, T. and Bobby, K. (2017), Civil Engineering Materials, Cengage Learning US, Queensland, Australia.
  40. Neville, A.M. (2000), Properties of Concrete, Eyrolles Editions, Paris, France.
  41. NF EN 1097-2 (2010), French Standard: Essai Los Angeless, AFNOR, Paris, France.
  42. NF EN 12350-2 (2012), Test for Fresh Concrete: Slump Test, AFNOR, Paris, France.
  43. Ngoc Kien, B., Tomoaki, S. and Hiroshi, T. (2017), "Improvement of mechanical properties of recycled aggregate concrete basing on a new combination method between recycled aggregate and natural aggregate", Constr. Build. Mater., 148, 376-385. https://doi.org/10.1016/j.conbuildmat.2017.05.084.
  44. Ozbakkaloglu, T., Gholampour, A. and Xie, T. (2018), "Mechanical and durability properties of recycled aggregate concrete: effect of recycled aggregate properties and content", J. Mater. Civil Eng., 30, 1-13. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002142.
  45. Poon, C.S. and Chan, D. (2006), "Feasible use of recycled concrete aggregates and crushed clay brick as unbound road sub-base", Constr. Build. Mater., 20(8), 569-577. https://doi.org/10.1016/j.conbuildmat.2005.01.045.
  46. Quebaud, M. (1996), "Caracterisation des granulats recycles - Etude de la conception et du comportement du beton incluant ces granulats", PhD Thesis, Artois University, France.
  47. Ridzuan, A.R.M., Ibrahim, A., Ismail, A.M.M. and Diah A.B.M. (2005), "Durability performances of recycled aggregate concrete", Achieving Sustainability in Constructions, Thomas Telford Publishing Group, Dundee, Scotland, UK, July.
  48. Rolf, E. and Werner, F. (2007), "Actual tendencies in structural fastening technology", Advances in Construction Materials, Stuttgart, Germany.
  49. Saha, S. and Rajasekaran, C. (2016), "Mechanical properties of recycled aggregate concrete produced with Portland Pozzolana Cement", Adv. Concrete Constr., 4(1), 27-35. https://doi.org/10.12989/acc.2016.4.1.027.
  50. Salesa, A., Perez-Benedicto, J.A., Colorado-Aranguren, D., Lopez-Julian, P.L., Esteban, L.M., Sanz-Balduz, L.J., Saez-Hostaled, J.L., Ramis, J. and Olivares, D. (2017), "Physico- mechanical properties of multi- recycled concrete from precast concrete industry" , J. Clean. Produ., 141, 248-255. https://doi.org/10.1016/j.jclepro.2016.09.058.
  51. Sallal, R.A., Nahhab, A.H., Al-aayedi, H.K.H. and Athraa, M.N. (2018), "Expansion and strength properties of concrete containing contaminated recycled concrete aggregate", Case Stud. Constr. Mater., 9, 1-14. https://doi.org/10.1016/j.cscm.2018.e00201.
  52. Skaropoulou, A., Kakali, G. and Tsivilis, S. (2012), "Thaumasite form of sulfate attack in limestone cement concrete: The effect of cement composition, sand type and exposure temperature", Constr. Build. Mater., 36, 527-533. https://doi.org/10.1016/j.conbuildmat.2012.06.048
  53. Valerie, S. and Assia, D.T. (2013), "Improvement of recycled concrete aggregate properties by polymer treatments", Sustain. Built Environ., 2(2), 143-152. https://doi.org/10.1016/j.ijsbe.2014.03.003.
  54. Wang, Z. and Huang X. (2003), "Repeated reuse of demolished concrete wastes as aggregates", Role of Concrete in Sustainable Development, Thomas Telford Publishing Group, Dundee, Scotland, UK, September.
  55. Yahiaoui, W., Kenai, S., Menadi, B. and Kadri, E. (2017), "Durability of self compacted concrete containing slag in hot climate", Adv. Concrete Constr., 5(3), 271-288. https://doi.org/10.12989/acc.2017.5.3.271
  56. Yaragal, S.C., Teja, D.C. and Shaffi, M. (2016), "Performance studies on concrete with recycled coarse aggregates", Adv. Concrete Constr., 4(4), 263-281. https://doi.org/10.12989/acc.2016.4.4.263.
  57. Yasser, A.F. (2016), "Impact of recycled gravel obtained from low or medium concrete grade on concrete properties", HBRC J., 14(1), 1-8. https://doi.org/10.1016/j.hbrcj.2016.04.003.
  58. Yildirim, K. and Sumer, M. (2013), "Effect of sodium chloride and magnesium sulfate concentration on the durability of cement mortar with and without fly ash", Compos. J., 52, 56-61. https://doi.org/10.1016/j.compositesb.2013.03.040.
  59. Zheng, C., Lou, C., Du G., Li. X., Liu, Z. and Li, L. (2018), "Mechanical properties of recycled concrete with demolished waste concrete aggregate and clay brick aggregate", Result. Phys., 9, 1317-1322. https://doi.org/10.1016/j.rinp.2018.04.061.

피인용 문헌

  1. Elasto-Damage constitutive modelling of recycled aggregate concrete vol.28, pp.1, 2020, https://doi.org/10.12989/cac.2021.28.1.013