Advances in concrete construction

  • 제9권1호
  • /
  • Pages.1-7
  • /
  • 2020
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Torsional behaviour of reinforced concrete beams retrofitted with aramid fiber

  • Kandekar, Sachin B. (Department of Civil Engineering, Amrutvahini College of Engineering) ;
  • Talikoti, Rajashekhar S. (Department of Civil Engineering, R. H. Sapat College of Engineering, Management Studies and Research)
  • 투고 : 2018.10.09
  • 심사 : 2019.10.03
  • 발행 : 2020.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

Retrofitting is an alteration of existing member or component of the structure. In civil engineering point of view, it is called strengthening of the old structure. Deterioration of structures may be due to aging, corrosion, failure of joints, earthquake forces, increase in service loads, etc. Such structures need urgent repair, retrofitting and strengthening to avoid collapse, cracking and loss in strength or deflection. Advanced techniques are required to be developed for the repair of structural components to replace conventional techniques. This paper focuses exclusively on torsional behaviour of Reinforced Concrete (RC) beams and retrofitted RC beams wrapped with aramid fiber. Beams were retrofitted with aramid fiber by full wrapping and in the form of 150 mm wide strips at a spacing of 100 mm, 150 mm, 200 mm respectively using epoxy resin and hardener. A total 15 numbers of RC beams of 150 mm×300 mm×1300 mm in size were cast, 3 beams are tested as control specimens, and 12 beams are tested for torsion up to the failure and then retrofitted with aramid fiber. Experimental results are validated with the help of data obtained by finite element analysis using ANSYS. The full wrapping configuration of aramid fiber regains 105% strength after retrofitting. With the increase in spacing of fabric material, torsional strength reduces to 82% with about 45% saving in material.

키워드

참고문헌

  1. Abdel-Jaber, M.S., Shatanawi, A.S. and Abdel-Jaber, M.S. (2007), "Guidelines for shear strengthening of beams using carbon fiber-reinforced polymer (FRP) plates", Jordan J. Civil Eng., 1(4), 327-335.
  2. Abdel-Kareem, A.H. (2014), "Shear strengthening of reinforced concrete beams with rectangular web openings by FRP composites", Adv. Concrete Constr., 2(4), 281-300. http://dx.doi.org/10.12989/acc.2014.2.4.281.
  3. Alabdulhady, M.Y. and Sneed, L.H. (2018), "A study of the effect of fiber orientation on the torsional behavior of RC beams strengthened with PBO-FRCM composite", Constr. Build. Mater., 166, 839-854. https://doi.org/10.1016/j.conbuildmat.2018.02.004.
  4. Alabdulhady, M.Y., Sneed, L.H. and Christian, C. (2017), "Torsional behavior of RC beams strengthened with PBO-FRCM composite-An experimental study", Eng. Struct., 136, 393-405. https://doi.org/10.1016/j.engstruct.2017.01.044.
  5. Atea, R.S. (2016), "Torsional behavior of reinforced concrete T-beams strengthened with CFRP strips", Case Stud. Constr. Mater., 7, 110-127. https://doi.org/10.1016/j.cscm.2017.03.002.
  6. Behera, G., Rao, T.D.G. and Rao, C.B.K. (2016), "Torsional behaviour of reinforced concrete beams with ferrocement U-jacketing-Experimental study", Case Stud. Constr. Mater., 4, 15-31. https://doi.org/10.1016/j.cscm.2015.10.003.
  7. Behera, G.C. and Dhal, M. (2018), "Torsional behaviour of normal strength RCC beams with ferrocement "U" wraps", Facta Univ., Ser.: Arch. Civil Eng., 16(1), 1-16. https://doi.org/10.2298/FUACE160514001B.
  8. Chen, X. and Zhou, Y. (2016), Technical Textiles for Ballistic Protection, Handbook of Technical Textiles, Second Edition, Technical Textile Applications, Woodhead Publishing, Bolton, UK.
  9. Deifalla, A. and Ghobarah, A. (2014), "Behavior and analysis of inverted T-shaped RC beams under shear and torsion", Eng. Struct., 68, 57-70. https://doi.org/10.1016/j.engstruct.2014.02.011.
  10. Deifalla, A., Awad, A. and Elgarhy, M. (2013), "Effectiveness of externally bonded CFRP strips for strengthening flanged beams under torsion: An experimental study", Eng. Struct., 56, 2065-75. https://doi.org/10.1016/j.engstruct.2013.08.027.
  11. Elwan, S.K. (2017), "Torsion strengthening of RC beams using CFRP (parametric study)", KSCE J. Civil Eng., 21(4), 1273-1281. https://doi.org/10.1007/s12205-016-0156-7.
  12. Ferreira, D., Bairan, J.M. and Mari, A. (2015), "Shear strengthening of reinforced concrete beams by means of vertical prestressed reinforcement", Struct. Infrastr. Eng.: Mainten. Manage. Life-Cyc. Des. Perform., 12(3), 394-410. https://doi.org/10.1080/15732479.2015.1019893.
  13. Jassal, M. and Ghosh, A. (2002), "Aramid fibers-An overview", Ind. J. Fib. Text. Res., 27, 290-306.
  14. Kandekar, S.B. and Talikoti, R.S. (2018), "Torsional behaviour of reinforced concrete beam wrapped with aramid fiber", J. King Saud Univ.-Eng. Sci., 31(4), 340-344. https://doi.org/10.1016/j.jksues.2018.02. 001.
  15. Mostofinejad, D. and Talaeitaba, S.B. (2014), "Strengthening and rehabilitation of RC beams with FRP overlays under combined shear and torsion", Elec. J. Struct. Eng., 14, 84-92.
  16. Panchacharam, S. and Belarbi A. (2002), "Torsional behavior of reinforced concrete beams strengthened with FRP composites", First FIB Congress, Osaka, Japan, October.
  17. Tarfan, S., Banazadeh, M. and Zaker Esteghamati, M. (2019), "Probabilistic seismic assessment of non- ductile RC buildings retrofitted using pre-tensioned aramid fiber reinforced polymer belts", Compos. Struct., 208, 865-878. https://doi.org/10.1016/j.compstruct.2018.10.048.
  18. Thermou, G.E. and Elnashai, A.S. (2006), "Seismic retrofit schemes for RC structures and local-global consequences. Earthquake engineering and structural dynamics", Prog. Struct. Eng. Mater., 8, 1-15. https://doi.org/10.1002/pse.208.