Structural Engineering and Mechanics

  • 제73권5호
  • /
  • Pages.585-598
  • /
  • 2020
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A study of fracture of a fibrous composite

  • Mirsalimov, Vagif M. (Department of Mechanics, Azerbaijan Technical University) ;
  • Hasanov, Shahin H. (Department of Mechanics, Azerbaijan Technical University)
  • 투고 : 2019.09.01
  • 심사 : 2019.10.30
  • 발행 : 2020.03.10
⟨ 이전 논문 다음 논문 ⟩

초록

We develop design model within which nucleation and propagation of crack in a fibrous composite is described. It is assumed that under loading, crack initiation and fracture of material happens in the composite. The problem of equilibrium of a composite with embryonic crack is reduced to the solution of the system of nonlinear singular integral equations with the Cauchy type kernel. Normal and tangential forces in the crack nucleation zone are determined from the solution of this system of equations. The crack appearance conditions in the composite are formed with regard to criterion of ultimate stretching of the material's bonds. We study the case when near the fiber, the binder has several arbitrary arranged rectilinear prefracture zones and a crack with interfacial bonds. The proposed computational model allows one to obtain the size and location of the zones of damages (prefracture zones) depending on geometric and mechanical characteristics of the fibrous composite and applied external load. Based on the suggested design model that takes into account the existence of damages (the zones of weakened interparticle bonds of the material) and cracks with end zones in the composite, we worked out a method for calculating the parameters of the composite, at which crack nucleation and crack growth occurs.

키워드

참고문헌

  1. Afshar A., Daneshyar A., Mohammadi, S. (2015), "XFEM analysis of fiber bridging in mixed-mode crack propagation in composites", Compos. Struct., 125, 314-327. http://dx.doi.org/10.1016/j.compstruct.2015.02.002.
  2. Aveiga, D. and Ribeiro, M.L. (2018), "A delamination propagation model for fiber reinforced laminated composite materials", Math. Problem. Eng., 2018, 1861268, 9. https://doi.org/10.1155/2018/1861268.
  3. Babaei, R. and Farrokhabadi, A. (2017), "A computational continuum damage mechanics model for predicting transverse cracking and splitting evolution in open hole cross-ply composite laminates", Fatigue. Fracture. Eng. Mater. Struct., 40(3), 375-390. https://doi.org/10.1111/ffe.12502.
  4. Bakhshan, H., Afrouzian, A., Ahmadi, H. and Taghavimehr, M. (2018), "Progressive failure analysis of fiber-reinforced laminated composites containing a hole", Int. J. Damage Mech., 27(7), 963-978. https://doi.org/10.1177/1056789517715088.
  5. Birger, I.A. (1965), "Structural design with allowance for plasticity and creep", Izv. Akad. Nauk SSSR. Mekhanika, 2, 113-119.
  6. Brighenti, R., Carpinteri, A., Spagnoli, A. and Scorza, D. (2013), "Continuous and lattice models to describe crack paths in brittle- matrix composites with random and unidirectional fibres", Eng. Fracture Mech., 108, 170-182. https://doi.org/10.1016/j.engfracmech.2013.05.006.
  7. Bouhala, L., Makradi, A., Belouettar, S. Kiefer-Kamal, H., Freres, P. (2013), "Modelling of failure in long fibres reinforced composites by X-FEM and cohesive zone model", Compos. Part B. Eng., 55, 352-361. https://doi.org/10.1016/j.compositesb.2012.12.013.
  8. Cameselle-Molares, A., Sarfaraz, R., Shahverdi, M., Keller, T. and Vassilopoulos, A.P. (2017), "Fracture mechanics-based progressive damage modelling of adhesively bonded fibre-reinforced polymer joints", Fatigue. Fracture. Eng. Mater. Struct., 40(12), 2183-2193. https://doi.org/10.1111/ffe.12.
  9. Chaudhuri, R.A. (2011), "Three-dimensional singular stress field at the front of a crack weakening a unidirectional fiber reinforced composite plate", Comp. Struct., 93(2), 513-527. https://doi.org/10.1016/j.compstruct.2010.08.028.
  10. Draiche, K., Tounsi, A. and Mahmoud, S.R. (2016), "A refined theory with stretching effect for the flexure analysis of laminated composite plates", Geomech. Eng., 11(5), 671-690. https://doi.org/10.12989/gae.2016.11.5.671.
  11. Greco, F., Leonetti, L. and Lonetti, P. (2013), "A two-scale failure analysis of composite materials in presence of fiber/matrix crack initiation and propagation", Comp. Struct., 95, 582-597. https://doi.org/10.1016/j.compstruct.2012.08.035.
  12. Hao, W., Yao, X., Ma, Y. and Yuan, Y. (2015), "Experimental study on interaction between matrix crack and fiber bundles using optical caustic method", Eng. Fracture Mech., 134, 354-67. https://doi.org/10.1016/j.engfracmech.2014.12.004.
  13. Ibraheem, O.F. Abu Bakar, B.H. and Johari I. (2015), "Behavior and crack development of fiber-reinforced concrete spandrel beams under combined loading: an experimental study", Struct. Eng. Mech., 54(1), 1-17. https://doi.org/10.12989/sem.2015.54.1.001.
  14. Il'yushin, A.A. (2003), Plasticity, Logos, Moscow, Russia.
  15. Ju, J.W. and Wu, Y. (2016), "Stochastic micromechanical damage modeling of progressive fiber breakage for longitudinal fiber-reinforced composites", Int. J. Damage Mech., 25(2), 203-227. https://doi.org/10.1177/1056789515576863.
  16. Kaci, A., Houari, M.S., Bousahla, A.A., Tounsi, A. and Mahmoud, S.R. (2018), "Post-buckling analysis of shear-deformable composite beams using a novel simple two-unknown beam theory", Struct. Eng. Mech., 65(5), 621-631. https://doi.org/10.12989/sem.2018.65.5.621.
  17. Ko, Y.F. and Ju, J.W. (2013), "Effects of fiber cracking on elastoplastic-damage behavior of fiber-reinforced metal matrix composites", Int. J. Damage Mech., 22(1), 48-67. https://doi.org/10.1177/1056789511433340.
  18. Ladopoulos, E.G. (2000), Singular Integral Equations: Linear and Non-linear Theory and Its Applications in Science and Engineering, Springer Verlag, Berlin Heidelberg, Germany.
  19. Le, B.D., Dau, F., Charles, J.L., Iordanoff, I. (2016), "Modeling damages and cracks growth in composite with a 3D discrete element method", Compos. Part B. Eng., 91, 615-630. https://doi.org/10.1016/j.compositesb.2016.01.021.
  20. Li, S., Thouless, M.D., Waas, A.M., Schroeder, J.A. and Zavattieri, P.D. (2005), "Use of a cohesive-zone model to analyze the fracture of a fiber-reinforced polymer-matrix composite", Compos. Sci. Technol., 65(3-4), 537-549. https://doi.org/10.1016/j.compscitech.2004.08.004.
  21. Liu, P.F., Chu, J.K., Liu, Y.L. and Zheng, J.Y. (2012), "A study on the failure mechanisms of carbon fiber/epoxy composite laminates using acoustic emission", Mater. Design, 37, 228-235. https://doi.org/10.1016/j.matdes.2011.12.015.
  22. Lu, N.C., Cheng, Y.H., Si, H.L. and Cheng, J. (2007), "Dynamics of asymmetrical crack propagation in composite materials", Theoretical Appl. Fracture Mech., 47(3), 260-273. https://doi.org/10.1016/j.tafmec.2007.01.004.
  23. Lu, N., Li, X., Cheng, Y. and Cheng, J. (2011), "An asymmetrical dynamic crack model of bridging fiber pull-out of composite materials", Fibers Polym., 12(1), 79-88. https://doi.org/10.1007/s12221-011-0079-3.
  24. Mahi, A., Adda Bedia E. and Tounsi A. (2015), "A new hyperbolic shear deformation theory for bending and free vibration analysis of isotropic, functionally graded, sandwich and laminated composite plates", Appl. Math. Model., 39(9), 2489-2508. https://doi.org/10.1016/j.apm.2014.10.045.
  25. Mirsalimov, V.M. (1987), Non-one-dimensional Elastoplastic Problems, Nauka, Moscow, Russia.
  26. Mirsalimov, V.M. (2007), "The solution of a problem in contact fracture mechanics on the nucleation and development of a bridged crack in the hub of a friction pair", J. Applied Mathematics Mechanics, 71(1), 120-136. https://doi.org/10.1016/j.jappmathmech.2007.03.003.
  27. Mirsalimov, V.M. (2018), "Minimization of stress state of compound body weakened with cracks", Mech. Adv. Mater. Struct.. https://doi.org/10.1080/15376494.2018.1444220.
  28. Mirsalimov, V.M. and Askarov, V.A. (2016), "Minimization of fracture parameters of a composite at bending", Mech. Compos. Mater., 51(6), 737-744. https://doi.org/10.1007/s11029-016-9544-9.
  29. Mirsalimov, V.M. and Hasanov, F.F. (2014a), "Interaction of a periodic system of foreign elastic inclusions whose surface is uniformly covered with a homogeneous cylindrical film and two systems of straight line cracks with end zones", J. Machinery Manufacture Reliability, 43(5), 408-415. https://doi.org/10.3103/S1052618814050124.
  30. Mirsalimov, V.M. and Hasanov, F.F. (2014b), "Interaction between periodic system of rigid inclusions and rectilinear cohesive cracks in an isotropic medium under transverse shear", Acta Polytechnica Hungarica, 11(5), 161-176. 10.12700/APH.11.05.2014.05.10.
  31. Mirsalimov, V.M. and Hasanov, F.F. (2015), "Nucleation of cracks in an isotropic medium with periodic system of rigid inclusions under transverse shear", Acta Mech., 226(2), 385-395. https://doi.org/10.1007/s00707-014-1187-0.
  32. Mirsalimov, V.M. and Hasanov, Sh.G. (2014), "Modeling of crack nucleation in covering on an elastic base", Int. J. Damage Mech., 23(3), 430-450. https://doi.org/10.1177/1056789513519459.
  33. Mirsalimov, V.M. and Kalantarly, N.M. (2015a), "Crack nucleation in circular disk under mixed boundary conditions", Arch. Mech., 67(2), 115-136.
  34. Mirsalimov, V.M. and Kalantarly, N.M. (2015b), "Cracking in a circular disk under mixed boundary conditions", Acta Mech., 226(6), 1897-1907. https://doi.org/10.1007/s00707-014-1292-0.
  35. Mishnaevsky, L. and Brondsted, P. (2009), "Micromechanical modeling of damage and fracture of unidirectional fiber reinforced composites: A review", Comput. Mater. Sci., 44(4), 1351-1359. https://doi.org/10.1016/j.commatsci.2008.09.004.
  36. Mokhtari, A., Ouali, M.O. and Tala-Ighil, N. (2015), "Damage modelling in thermoplastic composites reinforced with natural fibres under compressive loading", Int. J. Damage Mech., 24(8), 1239-1260. https://doi.org/10.1177/1056789515573900.
  37. Muskhelishvili, N.I. (1977), Some Basic Problem of Mathematical Theory of Elasticity, Springer, Dordrecht, Netherlands.
  38. Panasyuk, V.V. (1991), Mechanics of Quasibrittle Fracture of Materials, Naukova Dumka, Kiev, Ukraine.
  39. Panasyuk, V.V., Savruk, M.P. and Datsyshyn, A.P. (1976), Stress Distribution around Cracks in Plates and Shells, Naukova Dumka, Kiev, Ukraine.
  40. Rusinko, A. and Rusinko, K. (2011), Plasticity and Creep of Metals, Springer Verlag, Berlin Heidelberg, Germany.
  41. Savruk, M.P. and Kazberuk, A. (2017), Stress Concentration at Notches, Springer, Cham, Switzerland.
  42. Tavara, L., Mantic, V., Graciani, E. and Paris, F. (2011), "BEM analysis of crack onset and propagation along fiber-matrix interface under transverse tension using a linear elastic-brittle interface model", Eng. Analysis Boundary Elements, 35(2), 207-222. https://doi.org/10.1016/j.enganabound.2010.08.006.
  43. Usal, M. (2015), "On continuum damage modeling of fiber reinforced viscoelastic composites with microcracks in terms of invariants", Math. Problem. Eng., 2015, 624750, 15. http://dx.doi.org/10.1155/2015/624750.
  44. Woo, K. (2017), "Fracture analysis of woven textile composite using cohesive zone modeling", J. Mech. Sci. Technol., 31(4), 1629-1637. https://doi.org/10.1007/s12206-017-0310-2.