DOI QR코드

DOI QR Code

Estimation of the load-deformation responses of flanged reinforced concrete shear walls

  • Wang, Bin (State Key Laboratory of Green Building in Western China, Xi'an University of Architecture and Technology) ;
  • Shi, Qing-Xuan (State Key Laboratory of Green Building in Western China, Xi'an University of Architecture and Technology) ;
  • Cai, Wen-Zhe (State Key Laboratory of Green Building in Western China, Xi'an University of Architecture and Technology) ;
  • Peng, YI-Gong (State Key Laboratory of Green Building in Western China, Xi'an University of Architecture and Technology)
  • 투고 : 2019.07.25
  • 심사 : 2019.10.28
  • 발행 : 2020.03.10

초록

As limited well-documented experimental data are available for assessing the attributes of different deformation components of flanged walls, few appropriate models have been established for predicting the inelastic responses of flanged walls, especially those of asymmetrical flanged walls. This study presents the experimental results for three large-scale T-shaped reinforced concrete walls and examines the variations in the flexural, shear, and sliding components of deformation with the total deformation over the entire loading process. Based on the observed deformation behavior, a simple model based on moment-curvature analysis is established to estimate flexural deformations, in which the changes in plastic hinge length are considered and the deformations due to strain penetration are modeled individually. Based on the similar gross shapes of the curvature and shear strain distributions over the wall height, a proportional relationship is established between shear displacement and flexural rotation. By integrating the deformations due to flexure, shear, and strain penetration, a new load-deformation analytical model is proposed for flexure-dominant flanged walls. The proposed model provides engineers with a simple, accurate modeling tool appropriate for routine design work that can be applied to flexural walls with arbitrary sections and is capable of determining displacements at any position over the wall height. By further simplifying the analytical model, a simple procedure for estimating the ultimate displacement capacity of flanged walls is proposed, which will be valuable for performance-based seismic designs and seismic capacity evaluations.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Natural Science Foundation of Shaanxi Province, China Postdoctoral Science Foundation

참고문헌

  1. Bafti, F.G., Mortezaei, A. and Kheyroddin, A. (2019). "The length of plastic hinge area in the flanged reinforced concrete shear walls subjected to earthquake ground motions", Struct. Eng. Mech., 69(6), 651-665. https://doi.org/10.12989/SEM.2019.69.6.651.
  2. Beyer, K., Dazio, A. and Priestley, M.J.N. (2008), "Quasi-static cyclic tests of two U-shaped reinforced concrete walls", J. Earthq. Eng., 12(7), 1023-1053. https://doi.org/10.1080/13632460802003272.
  3. Beyer, K., Dazio, A. and Priestley, M.J.N. (2011), "Shear deformations of slender reinforced concrete walls under seismic loading", ACI Struct. J., 108(2), 167-177. https://doi.org/10.14359/51664252.
  4. Brueggen, B.L. (2009), "Performance of T-shaped reinforced concrete structural walls under multi-directional loading", Ph.D. Dissertation, University of Minnesota, Minnesota.
  5. Chen, Z., Xu, J., Chen, Y. and Su, Y. (2016), "Seismic behavior of T-shaped steel reinforced high strength concrete short-limb shear walls under low cyclic reversed loading", Struct. Eng. Mech., 57(4), 681-701. https://doi.org/10.12989/sem.2016.57.4.681.
  6. Choi, C.-S., Ha, S.-S., Lee, L.-H., Oh, Y.-H. and Yun, H.-D. (2004), "Evaluation of deformation capacity for RC T-shaped cantilever walls", J. Earthq. Eng., 8(3), 397-414. https://doi.org/10.1080/13632460409350494.
  7. Collins, M.P. and Mitchell, D. (1997), Prestressed Concrete Structures, Response Publications, Toronto, ON.
  8. Dang, Z., Liang, X. and Yu, J. (2014), "Nonlinear analysis of axial-flexure-shear coupling behavior of fiber reinforced concrete shear walls", J. Build. Struct., 35, 104-112. https://doi.org/ 10.14006/j.jzjgxb.2014.08.036.
  9. Dazio, A., Wenk, T. and Bachmann, H. (1999), Quasi-Static Cyclic Tests on RC Structural Walls. Report No. 239, ETH, Zurich, Switzerland.
  10. Eligehausen, R., Popov, E.P. and Bertero, V.V. (1983), "Local Bond Stress-Slip Relationships of Deformed Bars under Generalized Excitations", Research Report No. UCB/EERC-83/23; Energy Environmental Research Center, University of California, Berkeley, California, USA.
  11. Grammatikou, S., Biskinis, D. and Fardis, M.N. (2015), "Strength, deformation capacity and failure modes of RC walls under cyclic loading", Bull Earthq Eng., 13(11), 3277-3300. https://doi.org/10.1007/s10518-015-9762-x
  12. Hines, E.M. (2002), "Seismic performance of hollow rectangular reinforced concrete bridge piers with confined corner elements", Ph.D. Thesis, University of California, San Diego.
  13. Hines, E.M., Restrepo, J.I. and Seible, F. (2004), "Force-displacement characterization of well-confined bridge piers", ACI Struct. J., 101(4), 537-548. https://doi.org/10.14359/13340.
  14. Hossain, K.M. Anwar and Wright, H.D. (2004). "Flexural and shear behaviour of profiled double skin composite elements", Steel Compos. Struct., 4(2), 113-132. https://doi.org/10.12989/SCS.2004.4.2.113
  15. Hua, J. and Yahya, C.K. (2010), "Analytical modeling of medium-rise reinforced concrete shear walls", ACI Struct. J., 107(4), 400-410. https://doi.org/10.14359/51663812.
  16. Kabir, M.Z. and Vasheghani-Farahani, R. (2009). "Experimental investigation of performance in L-shaped wall to wall corner connections of 3D Panels subjected to lateral cyclic loading", Struct. Eng. Mech., 33(5), 649-652. https://doi.org/10.12989/SEM.2009.33.5.649
  17. Kang, S.-M. and Kim, J.Y. (2014), "Evaluation of deformation capacity including yield deformation in displacement-based design of special RC shear wall", Struct. Design Tall Spec. Build., 23(3), 181-209. https://doi.org/10.1002/tal.1030.
  18. Lowes, L.N. and Altoontash, A. (2003), "Modeling reinforced-concrete beam-column joints subjected to cyclic loading", J. Struct. Eng., 129(12), 1686-1697. https://doi.org/10.1061/(asce)0733-9445(2003)129:12(1686).
  19. Lu, Y.Q. and Huang, L. (2014). "Experimental study on cyclic behavior of reinforced concrete parallel redundancy walls", Struct. Eng. Mech., 52(6), 1177-1191. https://doi.org/10.12989/SEM.2014.52.6.1177
  20. Massone, L.M. and Alfaro, J.I. (2016), "Displacement and curvature estimation for the design of reinforced concrete slender walls", Struct. Design Tall Spec. Build., 25(16), 823-841. https://doi.org/10.1002/tal.1285.
  21. Massone, L.M., Orakcal, K. and Wallace, J.W. (2006), Shear-flexure interaction for structural walls, In: Motomoros, A. and Elwood, K. Deformation Capacity and Shear Strength of Reinforced Concrete Members under Cyclic Loading, ACI Special Publication, pp. 127-150.
  22. Mostafaei, H. and Vecchio, F.J. (2008), "Uniaxial shear-flexure model for reinforced concrete elements", J. Struct. Eng., 134(9), 1538-1547. https://doi.org/10.1061/(asce)0733-9445(2008)134:9(1538).
  23. Park, R. and Paulay, T. (1975), Reinforced Concrete Structures, John Wiley & Sons, New York.
  24. Parulekar, Y.M., Reddy, G.R., Singh, R.K., Gopalkrishnan, N. and Ramarao, G.V. (2016). "Seismic performance evaluation of mid-rise shear walls: experiments and analysis", Struct. Eng. Mech., 59(2), 291-312. https://doi.org/10.12989/SEM.2016.59.2.291
  25. Paulay, T. and Priestley, M.J.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley & Sons, New York.
  26. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-Based Seismic Design of Structures, IUSS Press, Pavia, Italy.
  27. Sakr, M.A., El-khoriby, S.R., Khalifa, T.M. and Nagib, M.T. (2017). "Modeling of RC shear walls strengthened by FRP composites", Struct. Eng. Mech., 61(3), 407-417. https://doi.org/10.12989/SEM.2017.61.3.407
  28. Shi, Q.X. and Liang, X.W. (2012), Design of Tall Building Structures, Science Press, Beijing, China.
  29. Smyrou, E., Sullivan, T., Priestley, N. and Calvi, M. (2013) "Sectional response of T-shaped RC walls", Bull Earthquake Eng., 11(4), 999-1019. https://doi.org/10.1007/s10518-012-9407-2.
  30. Takahashi, S., Yoshida, K., Ichinose, T., Sanada, Y., Matsumoto, K., Fukuyama, H. and Suwada, H. (2013), "Flexural drift capacity of reinforced concrete wall with limited confinement", ACI Struct. J., 110(1), 95-104. https://doi.org/10.14359/51684333.
  31. Thomsen, J.H. and Wallace, J.W. (2004), "Displacement-based design of slender reinforced concrete structural walls- experimental verification", J. Struct. Eng., 130(4), 618-630. https://doi.org/10.1061/(asce)0733-9445(2004)130:4(618).
  32. Varughese, J.A., Menon, D. and Prasad A.M. (2015), "Displacement-based seismic design of open ground storey buildings", Struct. Eng. Mech., 54(1), 19-33. https://doi.org/10.12989/sem.2015.54.1.019.
  33. Wang, B., Shi, Q.X. and Cai, W.Z. (2018), "Seismic behavior of flanged reinforced concrete shear walls under cyclic loading", ACI Struct. J., 115(5), 1231-1242. https://doi.org/10.14359/51702379.
  34. Wang, B., Shi, Q.X. and Cai, W.Z. (2019), "Decoupling and analysis of the deformation of flanged reinforced concrete shear walls", Struct. Design Tall Spec. Build., 28(13), e1628. https://doi.org/10.1002/tal.1628.
  35. Wang, B., Cai, W.Z. and Shi, Q.X. (2019b), "Simplified data-driven model for the moment curvature of T-shaped RC shear walls", Adv Civ Eng., 9897827. https://doi.org/10.1155/2019/9897827.
  36. Zhang, S.L. Lu, X.L. and Zhang, H.M. (2009), "Experimental and analytical studies on the ultimate displacement of RC shear walls", China Civil Eng. J., 42(4), 10-16. https://doi.org/10.15951/j.tmgcxb.2009.04.007.
  37. Zhao, H.J., Li, Q.N., Song, C., Jiang, H.T. and Zhao, J. (2017). "Seismic tests of RC shear walls confined with high-strength rectangular spiral reinforcement", Steel Compos. Struct., 24(1), 1-13. https://doi.org/10.12989/SCS.2017.24.1.001.
  38. Zhao, J. and Sritharan, S. (2007), "Modeling of strain penetration effects in fiber-based analysis of reinforced concrete structures", ACI Struct. J., 104(2): 133-141. https://doi.org/10.14359/18525.
  39. Zhou, Y., Zhang, D., Huang, Z. and Li, D. (2014), "Deformation capacity and performance-based seismic design for reinforced concrete shear walls", J. Asian Archit. Build. Eng., 13(1), 209-215. https://doi.org/10.3130/jaabe.13.209.