DOI QR코드

DOI QR Code

Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load

  • Shariati, Mahdi (Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University) ;
  • Azar, Sadaf Mahmoudi (Department of Civil Engineering, Tabriz Branch, Islamic Azad University) ;
  • Arjomand, Mohammad-Ali (Faculty of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Tehrani, Hesam Salmani (School of Civil Engineering, College of Engineering, University of Tehran) ;
  • Daei, Mojtaba (Faculty of Civil Engineering, University of Tabriz) ;
  • Safa, Maryam (Institute of Research and Development, Duy Tan University)
  • 투고 : 2019.08.13
  • 심사 : 2019.10.19
  • 발행 : 2020.01.25

초록

The construction of combined pile-raft foundations is considered as the main option in designing foundations in high-rise buildings, especially in soils close to the ground surface which do not have sufficient bearing capacity to withstand building loads. This paper deals with the geotechnical report of the Northern Fereshteh area of Tabriz, Iran, and compares the characteristics of the single pile foundation with the two foundations of pile group and geogrid. Besides, we investigate the effects of five principal parameters including pile diameter and length, the number of geogrid layers, the depth of groundwater level, and pore water pressure on vertical consolidation settlement and pore water pressure changes over a year. This study assessed the mechanism of the failure of the soil under the foundation using numerical analysis as well. Numerical analysis was performed using the two-dimensional finite element PLAXIS software. The results of fifty-four models indicate that the diameter of the pile tip, either as a pile group or as a single pile, did not have a significant effect on the reduction of the consolidation settlement in the soil in the Northern Fereshteh Street region. The optimum length for the pile in the Northern Fereshteh area is 12 meters, which is economically feasible. In addition, the construction of four-layered ten-meter-long geogrids at intervals of 1 meter beneath the deep foundation had a significant preventive impact on the consolidation settlement in clayey soils.

키워드

과제정보

This research is funded by the administration of Tabriz municipality and engineering system. The authors would like to express their thanks to the organizations for their valuable help and support in this study.

참고문헌

  1. Afrazi, M., Mahmoud, Y., Alitalesh, M. and Fakhimi, A.A. (2018), "Numerical analysis of effective parameters in direct shear test by hybrid discrete-finite element method", Modares Civ. Eng. J., 18(3), 13-24 (in Persian).
  2. Afrazi, M. and Rouhanifar, S. (2019), "Experimental study on mechanical behavior of sand-rubber mixtures", Modares Civ. Eng. J., 19(4), 83-96 (in Persian).
  3. Alizadeh, A. and Dabiri, R. (2018), "Geotechnical illustration of Fereshteh Alley in Tabriz City", J. New Approach. Civ. Eng., 2(6), 14-32.
  4. Arabnejad Khanouki, M., Ramli Sulong, N. and Shariati, M. (2010), "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July.
  5. Armaghani, D. J., Hasanipanah, M., Amnieh, H. B., Bui, D. T., Mehrabi, P. and Khorami, M. (2019), "Development of a novel hybrid intelligent model for solving engineering problems using GS-GMDH algorithm", Eng. Comput., 1-13. https://doi.org/10.1007/s00366-019-00769-2.
  6. Budhu, M. (2015), Soil Mechanics Fundamentals, John Wiley & Sons.
  7. Burland, J.B., Jamiolkowski, M.B. and Viggiani, C. (2009), "Leaning Tower of Pisa: behaviour after stabilization operations", ISSMGE Int. J. Geoeng. Case Histories, 1(3), 156-169.
  8. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection-A review", Steel Compos. Struct., 10(5), 457-469. https://doi.org/10.12989/scs.2019.30.5.457.
  9. Xu, C., Zhang, X., Haido, J.H., Mehrabi, P., Shariati, A., Mohamad, E.T., Nguyen, H. and Wakil, K. (2019), "Using genetic algorithms method for the paramount design of reinforced concrete structures", Struct. Eng. Mech., 71(5), 503-513. https://doi.org/10.12989/sem.2019.71.5.503.
  10. Daie, M., Jalali, A., Suhatril, M., Shariati, M., Arabnejad Khanouki, M. M., Shariati, A. and Kazemi Arbat, P. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050. https://doi.org/10.5897/IJPS11.1585.
  11. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.
  12. Guido, V.A., Chang, D.K. and Sweeney, M.A. (1986), "Comparison of geogrid and geotextile reinforced earth slabs", Can. Geotech. J., 23(4), 435-440. https://doi.org/10.1139/t86-073.
  13. Hamidian, M., Shariati, A., Khanouki, M.M.A., Sinaei, H., Toghroli, A. and Nouri, K. (2012), "Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring", Sci. Res. Essays, 7(21), 1997-2001. https://doi.org/10.5897/SRE11.1387.
  14. Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium", Struct. Eng. Mech., 66(6), 737-748. https://doi.org/10.12989/sem.2018.66.6.737.
  15. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., 26(4), 485-499. https://doi.org/10.12989/scs.2018.26.4.485.
  16. Ismail, M., Shariati, M., Abdul Awal, A.S.M., Chiong, C.E., Sadeghipour Chahnasir, E., Porbar, A., Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681.
  17. Jahandari, S., Saberian, M., Zivari, F., Li, J., Ghasemi, M. and Vali, R. (2019), "Experimental study of the effects of curing time on geotechnical properties of stabilized clay with lime and geogrid", Int. J. Geotech. Eng., 13(2), 172-183. https://doi.org/10.1080/19386362.2017.1329259.
  18. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-019-00780-7.
  19. Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M. (2017), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. http://doi.org/10.12989/eas.2017.13.6.531.
  20. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067.
  21. Khorramian, K., Maleki, S., Shariati, M. and Sulong, N. R. (2015), "Behavior of tilted angle shear connectors", PLoS one, 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288.
  22. Kildashti, K., Samali, B., Mortazavi, M., Ronagh, H. and Sharafi, P. (2019), "Seismic collapse assessment of a hybrid cold-formed hot-rolled steel building", J. Construct. Steel Res., 155, 504-516. https://doi.org/10.1016/j.jcsr.2019.01.010.
  23. Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., 23(2), 207-214. http://doi.org/10.12989/sss.2019.23.2.207.
  24. Lozovyi, S. and Zahoruiko, E. (2014), "Plaxis simulation of static pile tests and determination of reaction piles influence", arXiv preprint arXiv:1411.0929, 3, 141.
  25. Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., 30(3), 271-280. http://doi.org/10.12989/scs.2019.30.3.271.
  26. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.T. and Salih, M.N. (2019). "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
  27. Mahmoudi Azar, S. (2017), "Stabilization of the soil under foundation on weak Saturated soils using Geogrids", Master's Thesis, Islamic Azad University, Tabriz Branch, Tabriz, Iran.
  28. Mahmoudi Azar, S. and Vafaeipoor Sorkhabi, R. (2017), "Improvement of loose clayey soil layers under shallow foundation with using geogrid", Quart. Special. J. Struct. Eng., 13, 29-36.
  29. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M. and Petkovic, D. (2019), "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intell. Manufact., 30(3), 1247-1257. http://doi.org/10.1007/s10845-017-1306-6.
  30. Meyerhof, G. and Hanna, A. (1978), "Ultimate bearing capacity of foundations on layered soils under inclined load", Can. Geotech. J., 15(4), 565-572. http://doi.org/10.1139/t78-060.
  31. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A Stat. Mech. Appl., 121169. http://doi.org/10.1016/j.physa.2019.121169
  32. Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Arabnejad Khanouki, M.M. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. http://doi.org/10.1016/j.engfailanal.2013.08.014.
  33. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., 46(6), 853-868. http://doi.org/10.12989/sem.2013.46.6.853.
  34. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., 14(5), 785-809. https://doi.org/10.12989/.2014.14.5.785.
  35. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014c), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. http://doi.org/10.12989/sem.2013.48.6.833.
  36. Mortazavi, M., Sharafi, P., Kildashti, K. and Samali, B. (2020), "Prefabricated hybrid steel wall panels for mid-rise construction in seismic regions", J. Build. Eng., 27, 100942. https://doi.org/10.1016/j.jobe.2019.100942.
  37. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., 27(5), 537-543. https://doi.org/10.12989/scs.2018.27.5.537.
  38. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Darvishnezhad Aliabad, M., Marto, A., Abdullahi, M.A.M., Ghanbari Ebadollah, Mahdizadeh M.B., Shariati, A. and Khorami, M. (2018), "Structure of Portland cement and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. http://doi.org/10.12989/sss.2018.22.4.425
  39. Ovando-Shelley, E., Ossa, A. and Romo, M.P. (2007), "The sinking of Mexico City: Its effects on soil properties and seismic response", Soil Dyn. Earthq. Eng., 27(4), 333-343. https://doi.org/10.1016/j.soildyn.2006.08.005.
  40. Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., 28(4), 483-494. https://doi.org/10.12989/scs.2018.28.4.483.
  41. Prasad, S. (2018), Foundation Settlement, Obtenido de elearning.
  42. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., 22(4), 413-424. http://doi.org/10.12989/sss.2018.22.4.413.
  43. Sadrekarimi, J. and Zekri, A. (2007), "Creep behavior of fine grained soils using visco-elastic models", J. Facult. Eng., 33(3), 12.
  44. Safa, M., Maleka, A., Arjomand, M.A., Khorami, M. and Shariat, M. (2019a), "Strain rate effects on soil-geosynthetic interaction in fine-grained soil", Geomech. Eng., 19(6), 533-542. http://doi.org/10.12989/gae.2019.19.6.53.
  45. Safa, M., Sari, P. A., Shariat, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A, https://doi.org/10.1016/j.physa.2019.124046.
  46. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel Compos. Struct., 21(3), 679-688. http://doi.org/10.12989/scs.2016.21.3.679.
  47. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., 30(5), 417-432. http://doi.org/10.12989/scs.2019.30.5.417.
  48. Sari, P.A., Suhatril, M., Osman, N., Mu'azu, M., Dehghani, H., Sedghi, Y., Safa, M., Hasanipanah, M., Wakil, K. and Khorami, M. (2018), "An intelligent based-model role to simulate the factor of safe slope by support vector regression", Eng. Comput., 35(4), 1521-1531. https://doi.org/10.1007/s00366-018-0677-4.
  49. Schumacher, T. and Shariati, A. (2013), "Monitoring of structures and mechanical systems using virtual visual sensors for video analysis: Fundamental concept and proof of feasibility", Sensors, 13(12), 16551-16564. https://doi.org/10.3390/s131216551.
  50. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Moghimi Azar, V., Toghroli, A., Safa, M., Tonnizam Mohamad, E., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., 22(3), 335-340. http://doi.org/10.12989/sss.2018.22.3.335.
  51. Shah, S., Sulong, N.R., Jumaat, M. and Shariati, M. (2016), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Fail. Anal., 66, 240-258. https://doi.org/10.1016/j.engfailanal.2016.04.017.
  52. Shah, S., Sulong, N. R., Shariati, M. and Jumaat, M. (2015), "Steel rack connections: Identification of most influential factors and a comparison of stiffness design methods", PloS one, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422.
  53. Shahabi, S., Sulong, N., Shariati, M., Mohammadhassani, M. and Shah, S. (2016), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., 20(3), 651-669. https://doi.org/10.12989/scs.2016.20.3.651.
  54. Shao, Z. and Vesel, A. (2015), "Modeling the packing coloring problem of graphs", Appl. Math. Modell., 39(13), 3588-3595. https://doi.org/10.1016/j.apm.2014.11.060.
  55. Shao, Z., Wakil, K., Usak, M., Amin Heidari, M., Wang, B. and Simoes, R. (2018), "Kriging empirical mode decomposition via support vector machine learning technique for autonomous operation diagnosing of CHP in microgrid", Appl. Therm. Eng., 145, 58-70. https://doi.org/10.1016/j.applthermaleng.2018.09.028.
  56. Sharafi, P., Mortazavi, M., Samali, B. and Ronagh, H. (2018a), "Interlocking system for enhancing the integrity of multi-storey modular buildings", Autom. Construct., 85, 263-272. https://doi.org/10.1016/j.autcon.2017.10.023.
  57. Sharafi, P., Mortazavi, M., Usefi, N., Kildashti, K., Ronagh, H. and Samali, B. (2018b), "Lateral force resisting systems in lightweight steel frames: Recent research advances", Thin-Walled Struct., 130, 231-253. https://doi.org/10.1016/j.tws.2018.04.019.
  58. Sharafi, P., Rashidi, M., Samali, B., Ronagh, H. and Mortazavi, M. (2018c), "Identification of factors and decision analysis of the level of modularization in building construction" J. Archit. Eng., 24(2), 04018010. https://doi.org/10.1061/(asce)ae.1943-5568.0000313
  59. Shariat, M., Mahmoudi Azar, S., Arjomand, M.-A., Salmani Tehrani, H., Daei, M. and Safa, M. (2019), "Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils", Geomech. Eng., 19(6), 473-484. https://doi.org/10.12989/gae.2019.19.6.473.
  60. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational Lagrangian multiplier method using optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. http://doi.org/10.12989/scs.2018.29.2.243.
  61. Shariati, A. (2014), "Behaviour of C-shaped angle shear connectors in high strength concrete", Ph.D. Thesis, University of Malaya, Kuala Lumpur, Malaya.
  62. Shariati, A. and Schumacher, T. (2015a), "SHM using Eulerianbased virtual visual sensors: Introduction of a new black-andwhite target for improved SNR", Struct. Health Monitor. http://dx.doi.org/10.12783/SHM2015/203.
  63. Shariati, A., Schumacher, T. and Ramanna, N. (2015b), "Eulerianbased virtual visual sensors to detect natural frequencies of structures", J. Civ. Struct. Health Monitor., 5(4), 457-468. https://doi.org/10.1007/s13349-015-0128-5.
  64. Shariati, A., Shariati, M., Sulong, N.R., Suhatril, M., Khanouki, M.A. and Mahoutian, M. (2014a), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Construct. Build. Mater., 52, 276-283. https://doi.org/10.1016/j.conbuildmat.2013.11.036.
  65. Shariati, M., Heirati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N. and Poi-Ngian, S. (2019a), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553.
  66. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N.A., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019b), "Application of a hybrid artificial neural networkparticle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534.
  67. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., Bahadori, A., Shariati, A., Trung, N.T., Salih, M.N. and Poi-Ngian, S. (2019c), "Application of extreme learning machine (ELM) and genetic programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., 33(3), 319-332. http://doi.org/10.12989/scs.2019.33.3.319.
  68. Shariati, M., Rafie, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Mehrabi, P., Shariat, A., Trung, N.T., Salih, M.N. and Poi-Ngian, S. (2019d), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Construct., 8(3), 225-237. http://doi.org/10.12989/acc.2019.8.3.225.
  69. Shariati, M., Ramli Sulong, N., Arabnejad Khanouki, M. and Shariati, A. (2011a), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics, Seoul, Korea, September.
  70. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2012), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. http://doi.org/10.1016/j.matdes.2011.08.008.
  71. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Construct. Build. Mater., 120, 382-392. http://doi.org/10.1016/j.conbuildmat.2016.05.102.
  72. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Khanouki, A., Mehdi, M. and Shafigh, P. (2011b), "Behavior of channel shear connectors in normal and light weight aggregate concrete (experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303.
  73. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Construct. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050.
  74. Shariati, M., Shariati, A., Sulong, N.R., Suhatril, M. and Khanouki, M.A. (2014b), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017.
  75. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S.N.R., Jalali, A., Abdullahi, M.A.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014.
  76. Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland.
  77. Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019e), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427.
  78. Sharma, R., Chen, Q., Abu-Farsakh, M. and Yoon, S. (2009), "Analytical modeling of geogrid reinforced soil foundation", Geotext. Geomembr., 27(1), 63. https://doi.org/10.1016/j.geotexmem.2008.07.002
  79. Shi, X., Hassanzadeh-Aghdam, M. and Ansari, R. (2019a), "Viscoelastic analysis of silica nanoparticle-polymer nanocomposites", Compos. Part B Eng., 158, 169-178. https://doi.org/10.1016/j.compositesb.2018.09.084.
  80. Shi, X., Jaryani, P., Amiri, A., Rahimi, A. and Malekshah, E.H. (2019b), "Heat transfer and nanofluid flow of free convection in a quarter cylinder channel considering nanoparticle shape effect", Powder Technol., 346, 160-170. http://doi.org/10.1016/j.powtec.2018.12.071.
  81. Sinaei, H., Jumaat, M. Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. http://doi.org/10.5897/IJPS11.1225
  82. Sinaei, H., Shariati, M., Abna, A. H., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Sci. Res. Essays, 7(21), 2002-2009. http://doi.org/10.5897/SRE11.1393.
  83. Skempton, A.W. and Bjerrum, L. (1957), "A contribution to the settlement analysis of foundations on clay", Geotechnique 7(4), 168-178. https://doi.org/10.1680/geot.1957.7.4.168.
  84. Suhatril, M., Osman, N., Sari, P.A., Shariati, M. and Marto, A. (2019), "Significance of surface eco-protection techniques for cohesive soils slope in Selangor, Malaysia", Geotech. Geol. Eng., 37(3), 2007-2014. https://doi.org/10.1007/s10706-018-0740-3.
  85. Taheri, E., Firouzianhaji, A., Yousefi, N., Mehrabi, P., Ronagh, H. and Samali, B. (2019), "Investigation of a method for strengthening perforated cold-formed steel profiles under compression loads", Appl. Sci., 9(23), 5085. https://doi.org/10.3390/app9235085.
  86. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., 17(5), 623-639. http://doi.org/10.12989/scs.2014.17.5.623.
  87. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2018), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intell. Manufact., 29(8), 1793-1801. https://doi.org/10.1007/s10845-016-1217-y.
  88. Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019a), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., 24(3), 415-425. http://doi.org/10.12989/sss.2019.24.3.415.
  89. Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019b), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639.
  90. Usefi, N., Sharafi, P. and Ronagh, H. (2019), "Numerical models for lateral behaviour analysis of cold-formed steel framed walls: State of the art, evaluation and challenges", Thin-Walled Struct., 138, 252-285. https://doi.org/10.1016/j.tws.2019.02.019.
  91. Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M., Tahir, M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., 27(3), 389-399. http://doi.org/10.12989/scs.2018.27.3.389.
  92. Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., 30(5), 433-441. http://doi.org/10.12989/scs.2019.30.5.433.
  93. Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D., Toghroli, A., Hashemi, M.H., Sedghi, Y. and Wakil, K. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., 28(4), 439-447. http://doi.org/10.12989/scs.2018.28.4.439.
  94. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete" Steel Compos. Struct., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067.

피인용 문헌

  1. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2020, https://doi.org/10.12989/acc.2020.9.4.355
  2. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2020, https://doi.org/10.12989/acc.2020.9.4.355
  3. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2020, https://doi.org/10.12989/scs.2020.35.2.187
  4. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2020, https://doi.org/10.12989/acc.2020.10.5.393
  5. Prediction of total sediment load: A case study of Wadi Arbaat in eastern Sudan vol.26, pp.6, 2020, https://doi.org/10.12989/sss.2020.26.6.781
  6. Knowledge-Based Prediction of Load-Carrying Capacity of RC Flat Slab through Neural Network and FEM vol.2021, 2020, https://doi.org/10.1155/2021/4528945
  7. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2020, https://doi.org/10.12989/sss.2021.28.2.167
  8. Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method vol.40, pp.6, 2020, https://doi.org/10.12989/scs.2021.40.6.853