참고문헌
- I. Javni, K. Song, J. Lin, and Z. S. Petrovic, Structure and propeties of flexible polyurethane foams with nano- and micro-fillers, J. Cell. Plast., 47(4), 357-372 (2011). https://doi.org/10.1177/0021955X11398115
- Y. C. Tu, P. Kiatsimkul, G. Suppes, and F. H. Hsieh, Physical properties of water blown rigid polyurethane foams from vegetable oil based polyols, J. Appl. Polym. Sci., 105, 453-459 (2007). https://doi.org/10.1002/app.26060
- C. Yang, Z. H. Zhuang, and Z. G. Yang, Pulverized polyurethane foam particles reinforced rigid polyurethane foam and phenolic foam, J. Appl. Polym. Sci., 131(1), 1-7 (2014).
- K. N. Kang and M. J. Park, Study on the major technology of zero energy architecture technique in residential building, Architectural Institute of Korea, 37(2), 480-483 (2017).
- Y. Duan, S. C. Jana, A. M. Reinsel, B. Lama, and M. P. Espe, Surface modification and reinforcement of silica aerogels using polyhedral oligomeric silsesquioxanes, J. Am. Chem. Soc., 28, 15362-15371 (2012).
- T. Y. Wei, T. F. Chang, and S. Y. Lu, Preparation of monolithic silica aerogel of low thermal conductivity by ambient pressure drying, J. Am. Ceram. Soc., 90(7), 2003-2007 (2007). https://doi.org/10.1111/j.1551-2916.2007.01671.x
- A. Rigacci, J. C. Marechal, M. Repoux, M. Moreno, and P. Achard, Preparation of polyurethae-based aerogels and xerogels for thermal superinsulation. J. Non-Cryst. Solids, 350, 372-378 (2004) https://doi.org/10.1016/j.jnoncrysol.2004.06.049
- N. Nazeran and J. Moghaddas, Synthesis and characterization of silica aerogel reinforced rigid polyurethane foam for thermal insulation application, J. Non-Cryst. Solids, 461, 1-11 (2017). https://doi.org/10.1016/j.jnoncrysol.2017.01.037
- C. Zhao, Y. Yan, Z. Hu, L. Li, and X. Fan, Preparation and characterization of granular silica aerogel/polyisocyanurate rigid foam composites, Constr. Build. Mater., 93, 309-316 (2015). https://doi.org/10.1016/j.conbuildmat.2015.05.129
- M. M. A. Nikje and Z. M. Tehrani, Polyurethane rigid foams reinforced by doubly modified nanosilica, J. Cell. Plast., 46, 159-172 (2010) https://doi.org/10.1177/0021955X09350526
- M. M. A. Nikje and Z. M. Tehrani, Novel modified nanosilica based on synthesized dipodal silane and its effects on the physical properties of rigid polyurethane foams, Des. Monomers Polym., 13, 249-260 (2010). https://doi.org/10.1163/138577210X12634696333631
- L. Verdolotti, M. Lavorgna, R. Lamanna, E. D. Maio, and S. Iannace, Polyurethane silica hybrid foam by sol gel approach: Chemical and functional properties, Polymer, 56, 20-28 (2015). https://doi.org/10.1016/j.polymer.2014.10.017
- Y. Chen, S. Zhou, G. Chen, and L. Wu, Preparation and characterization of polyester/silica nanocomposite resins, Prog. Org. Coat., 54, 120-126 (2005). https://doi.org/10.1016/j.porgcoat.2004.03.013
- V. D. Athawale and M. A. Kulkarni, Synthesis and performance evaluation of polyurethane/silica hybrid resins, Pigm. Resin Technol., 40, 49-57 (2011). https://doi.org/10.1108/03699421111095946
- J. K, Yoon and K. W. Koo, A study on properties of thermal insulation board prepared by porous silica aerogel, Trans. Korean Inst. Electr. Eng., 61(9), 1362-1367 (2012). https://doi.org/10.5370/KIEE.2012.61.9.1362
- G. Yang, X. Liu, and V. Lipik, Evaluation of silica aerogel-reinforced polyurethane foams for footwear applications, J. Mater. Sci., 53, 9463-9472 (2018). https://doi.org/10.1007/s10853-018-2244-1
- S. Chen, J. Sui, and L. Chen, Positional assembly of hybrid polyurethane nanocomposites via incorporation of inorganic building blocks into organic polymer, Colloid Polym. Sci., 283, 66-73 (2004). https://doi.org/10.1007/s00396-004-1093-4
- I. Javni, W. Zhang, V. Karajkov, and Z. S. Petrovic, Effect of nano- and micro-silica fillers on polyurethane foam properties, J. Cell. Plast., 38, 229-2g39 (2002). https://doi.org/10.1177/0021955X02038003139