참고문헌
- R. S. List, C. Webb, and S. E. Kim, "3D wafer stacking technology", Proc. Advanced Metallization Conference, San Diego (2002).
- J. Q. Lu, J. Jay McMahon, and R. J. Gutmann, "3D Integration Using Adhesive, Metal, and Metal/Adhesive as Wafer Bonding Interfaces", Proc. MRS Symp., 1112, 1112-E02-01 (2008).
- C. Ko and K. N. Chen, "Low temperature bonding technology for 3D integration", Microelectron. Reliab., 52, 302 (2012). https://doi.org/10.1016/j.microrel.2011.03.038
- A. K. Panigrahy and K. N. Chen, "Low Temperature Cu-Cu Bonding Technology in Three-Dimensional Integration: An Extensive Review", J. Electron. Packaging, 140(1), 010801 (2018). https://doi.org/10.1115/1.4038392
- K. N. Chen, C. S. Tan, A. Fan, and R. Reif, "Abnormal Contact Resistance Reduction of Bonded Copper Interconnects in Three-Dimensional Integration During Current Stressing", Appl. Phys. Lett., 86(1), 011903 (2005). https://doi.org/10.1063/1.1844609
-
H. Park and S. E. Kim, "Nitrogen passivation formation on Cu surface by
$Ar-N_2$ plasma for Cu-to-Cu wafer stacking application", Microsyst. Technol., 25, 3847 (2019). https://doi.org/10.1007/s00542-018-4254-y - R. Patti, "Three-Dimensional Integrated Circuits and the Future of System-on-Chip Designs", Proc. IEEE, 94(6), 1214 (2006). https://doi.org/10.1109/JPROC.2006.873612
- H. S. Park and S. E. Kim, "Two-Step Plasma Treatment on Copper Surface for Low Temperature Cu Thermo-Compression Bonding", IEEE Trnas. Comp. Packag. Manuf. Technol., 10(2), 332 (2019).
- M. Park, S. Baek, S. Kim, and S. E. Kim, "Argon plasma treatment on Cu surface for Cu bonding in 3Dintegration and their characteristics", Appl. Surf. Sci., 324, 168 (2015). https://doi.org/10.1016/j.apsusc.2014.10.098
- H. Takagi, K. Kikuchi, R. Maeda, T. R. Chung, and T. Suga, "Surface activated bonding of Silicon wafers at room temperature", Appl. Phys. Lett., 68(16), 2222 (1996). https://doi.org/10.1063/1.115865
- E. J. Jang, S. Hyun, H. J. Lee, and Y. B. Park, "Effect of Wet Pretreatment on Interfacial Adhesion Energy of Cu-Cu Thermocompression Bond for 3D IC Packages", J. Electron. Mater., 38, 2449 (2009). https://doi.org/10.1007/s11664-009-0942-9
- A. Huffman, J. Lannon, M. Lueck, C. Gregory, and D. Temple, "Fabrication and Characterization of Metal-to-Metal Interconnect Structures for 3-D Integration", J. Instrum., 4(3), P03006 (2009). https://doi.org/10.1088/1748-0221/4/03/P03006
- K. N. Chen, C. S. Tan, A. Fan, and R. Reif, "Copper Bonded Layers Analysis and Effects of Copper Surface Conditions on Bonding Quality for Three-Dimensional Integration", J. Electron. Mater., 34(12), 1464 (2005). https://doi.org/10.1007/s11664-005-0151-0
- C. S. Tan, D. F. Lim, S. G. Singh, S. K. Goulet, and M. Bergkvist, "Cu-Cu Diffusion Bonding Enhancement at Low Temperature by Surface Passivation Using Self-assembled Monolayer of Alkane-thiol", Appl. Phys. Lett., 95(19), 192108 (2009). https://doi.org/10.1063/1.3263154
-
Y. P. Huang, Y. S. Chien, R. N. Tzeng, M. S. Shy, T. H. Lin, K. H. Chen, C. T. Chiu, J. C. Chiou, C. T. Chuang, W. Hwang, H. M. Tong, and K. N. Chen, "Novel Cu-to-Cu Bonding With Ti Passivation at
$180^{\circ}C$ in 3-D Integration", IEEE Electron. Dev. Lett., 34(12), 1551 (2013). https://doi.org/10.1109/LED.2013.2285702 - Z. Liu, J. Cai, Q. Wang, L. Liu, and G. Zou, "Modified pulse laser deposition of Ag nanostructure as intermediate for low temperature Cu-Cu bonding", Appl. Surf. Sci., 445, 16 (2018). https://doi.org/10.1016/j.apsusc.2018.03.076
- H. Oprins, V. Cherman, T. Webers, A. Salahouelhadj, S. W. Kim, L. Peng, G. Van der Plas, and E. Beyne, "Characterization and Benchmarking of the Low Intertier Thermal Resistance of Three-Dimensional Hybrid Cu/Dielectric Wafer-to-Wafer Bonding", J. Electron. Packag., 139(1), 011008 (2017). https://doi.org/10.1115/1.4035597
- I. Jani, D. Lattard, P. Vivet, L. Arnaud, S. Cheramy, E. Beigne, A. Farcy, J. Jourdon, Y. Henrion, E. Deloffre, and H. Bilgen, "Characterization of Fine Pitch Hybrid Bonding Pads using Electrical Misalignment Test Vehicle", Proc. 69th Electronic Components and Technology Conference(ECTC), Las Vegas, 1926, IEEE (2019).
-
Y. Beilliard, R. Estevez, G. Parry, P. Mc Garry, L. Di Cioccio, and P. Couudrain, "Thermomechanical finite element modeling of
$Cu-SiO_2$ direct hybrid bonding with a dishing effect on Cu surfaces", Int. J. Solids Struct., 117, 208 (2017). https://doi.org/10.1016/j.ijsolstr.2016.02.041 - G. Gao, L. Mirkarimi, T. Workman, G. Fountain, J. Theil, G. Guevara, P. Liu, B. Lee, P. Mrozek, M. Huynh, C. Rudolph, T. Werner, and A. Hanisch, "Low Temperature Cu Interconnect with Chip to Wafer Hybrid Bonding", Proc. 69th Electronic Components and Technology Conference(ECTC), Las Vegas, 628, IEEE (2019).
- P. Enquist, G. Fountain, C. Petteway, A. Hollingsworth, and H. Grady, "Low cost of ownership scalable copper Direct Bond Interconnect 3D IC technology for three-dimensional integrated circuit applications", IEEE International Conference on 3D System Integration (3DIC), San Francisco (2009).
- G. Gao, T. Workman, L. Mirkarimi, G. Fountain, J. Theil, G. Guevara, C. Uzoh, B. Lee, P. Liu, and P. Mrozek, "Chip to Wafer Hybrid Bonding with Cu Interconnect: High Volume Manufacturing Process Compatibility Study", International Wafer-Level Packaging Conference (IWLPC), San Jose (2019).
-
R. He, M. Fujino, A. Yamauchi, and T. Suga, "Combined Surface Activated Bonding Technique for Hydrophilic
$SiO_2-SiO_2$ and Cu-Cu Bonding", ECS Transactions, 75(9), 117 (2016). https://doi.org/10.1149/07509.0117ecst -
T. Wlanis, R. Hammer, W. Ecker, S. Lhostis, C. Sart, S. Gallois-Garreignot, B. Rebhan, and G. A. Maier, "
$Cu-SiO_2$ hybrid bonding simulation including surface roughness and viscoplastic material modeling: A critical comparison of 2D and 3D modeling approach", Microelectron. Reliab., 86, 1 (2018). https://doi.org/10.1016/j.microrel.2018.05.005 - K. N. Chen, Z. Xu, and J. Q. Lu, "Demonstration and Electrical Performance Investigation of Wafer-Level Cu Oxide Hybrid Bonding Schemes", IEEE Electron Device Lett., 32(8), 1119 (2011). https://doi.org/10.1109/LED.2011.2157657
- S. Kim, P. Kang, T. Kim, K. Lee, J. Jang, K. Moon, H. Na, S. Hyun, and K. Hwang, "Cu Microstructure of High Density Cu Hybrid Bonding Interconnection", Proc. 69th Electronic Components and Technology Conference (ECTC), Las Vegas, 636, IEEE (2019).
- J. Morrison, R. Fontaine, D. James, and D. Yang, "Samsung Galaxy S7 Edge Teardown", April (2016) from http://www.chipworks.com/about-chipworks/overview/blog/samsung-galaxy-s7-edge-teardown
- P. Morrow, M. J. Kobrinsky, S. Ramanathan, C. M. Park, M. Harmes, V. Ramachandrarao, H. Park, G. Kloster, S. List, and S. Kim, "Wafer-Level 3D Interconnects Via Cu Bonding", Proc. Advanced Metallization Conference, San Diego (2004).
- P. R. Morrow, C. M. Park, S. Ramanathan, M. J. Kobrinsky, and M. Harmes, "Three-Dimensional Wafer Stacking Via Cu-Cu Bonding Integrated With 65-nm Strained-Si/Low-k CMOS Technology", IEEE Electron Device Lett., 27(5), 335 (2006). https://doi.org/10.1109/LED.2006.873424
-
Z. J. Hu, X. P. Qu, H. Lin, R. D. Huang, X. C. Ge, M. Li, S. M. Chen, and Y. H. Zhao, "Cu CMP process development and characterization of Cu dishing with
$1.8\;{\mu}m$ Cu pad and$3.6\;{\mu}m$ pitch in$Cu/SiO_2$ hybrid bonding", Jap. J. Appl. Phys., 58(SH), SHHC01 (2019). https://doi.org/10.7567/1347-4065/ab17c4 - L. Di Cioccio, P. Gueguen, R. Taibi, D. Landru, G. Gaudin, C. Chappaz, F. Rieutord, F. de Crecy, I. Radu, L. L. Chapelon, and L. Clavelier, "An Overview of Patterned Metal/Dielectric Surface Bonding: Mechanism, Alignment and Characterization", J. Electrochem. Soc., 158(6), 81 (2011).
- C. M. Liu, H. W. Lin, Y. C. Chu, C. Chen, D. R. Lyu, K. N. Chen, and K. N. Tu, "Low-temperature direct copper-to-copper bonding enabled by creep on highly (111)-oriented Cu surfaces", Scr. Mater., 78-79, 65 (2014). https://doi.org/10.1016/j.scriptamat.2014.01.040
- C. M. Liu1, H. W. Lin, Y. S. Huang, Y. C. Chu1, C. Chen, D. R. Lyu, K. N. Chen, and K. N. Tu, "Low-temperature direct copper-to-copper bonding enabled by creep on (111) surfaces of nanotwinned Cu", Sci. Rep., 5, 9734 (2015). https://doi.org/10.1038/srep09734
- J. Y. Juang, C. L. Lu, K. J. Chen, C. C. A. Chen, P. N. Hsu, C. Chen, and K. N. Tu, "Copper-to-copper direct bonding on highly (111)-oriented nanotwinned copper in no-vacuum ambient", Sci. Rep., 8, 13910 (2018). https://doi.org/10.1038/s41598-018-32280-x
-
H. Park and S. E. Kim, "Structural Characteristics of
$Ar-N_2$ Plasma Treatment on Cu Surface", J. Microelectron. Packag. Soc., 25(4), 75 (2018). https://doi.org/10.6117/KMEPS.2018.25.4.075 - R. Gonzalez-Arrabal R, N. Gordillo, M. Martin-Gonzalez, R. Ruiz-Bustos, and F. Agullo-Lopez, "Thermal stability of copper nitride thin films: The role of nitrogen migration", J. Appl, Phys,, 107(10), 103513, (2010). https://doi.org/10.1063/1.3369450
- R. He, M. Fujino, A. Yamauchi, Y. Wang, and T. Suga, "Combined Surface Activated Bonding Technique for Low-Temperature Cu/Dielectric Hybrid Bonding", ECS J. Solid State Sci. Technol., 5(7), 419 (2016). https://doi.org/10.1149/2.0201607jss
- J. Kim, K. Kim, H. Lee, H. Kim, Y. Park, and S. Hyun, "Characterization and observation of Cu-Cu Thermo-Compression Bonding using 4-point bending test system", J. Microelectron. Packag. Soc., 18(4), 11 (2011). https://doi.org/10.6117/kmeps.2011.18.4.011