DOI QR코드

DOI QR Code

Study on the Mechanical Properties of Tropical Hybrid Cross Laminated Timber Using Bamboo Laminated Board as Core Layer

  • GALIH, Nurdiansyah Muhammad (Deparment of Biobased Materials, College of Agriculture and Life Science, Chungnam National University) ;
  • YANG, Seung Min (Deparment of Biobased Materials, College of Agriculture and Life Science, Chungnam National University) ;
  • YU, Seung Min (Deparment of Biobased Materials, College of Agriculture and Life Science, Chungnam National University) ;
  • KANG, Seog Goo (Deparment of Biobased Materials, College of Agriculture and Life Science, Chungnam National University)
  • Received : 2019.09.02
  • Accepted : 2020.03.09
  • Published : 2020.03.25

Abstract

This study was performed to analyze the mechanical properties of tropical hybrid cross-laminated timber (CLT) with bamboo laminated board as the core layer in order to evaluate the possibility of its use as a CLT material. Bamboo board was used as the core layer and the tropical species Acacia mangium willd., from Indonesia, was used as the lamination in the outer layer. The modulus of elasticity (MOE), modulus of rupture (MOR), and shear strength of the hybrid CLT were measured according to APA PRG 320-2018 Standard for Performance-Rated Cross-Laminated Timber. The results show that the bending MOE of the hybrid CLT was found to be 2.76 times higher than SPF (Spruce Pine Fir) CLT. The reason why the high MOE value was shown in bamboo board and hybrid CLT applied bamboo board is because of high elasticity of bamboo fiber. However, the shear strength of the hybrid CLT was 0.8 times lower than shear strength of SPF CLT.

Keywords

References

  1. Andi, S.R.D.L., Hadi, Y.S., Hermawan, D., Santoso, A. 2018. Physical and Mechanical Properties of Glued Laminated Lumber of Pine (Pinus merkusii) and Jabon (Anthocephalus cadamba). Journal of the Korean Wood Science and Technology 46(2): 143-148. https://doi.org/10.5658/WOOD.2018.46.2.143
  2. ANSI/APA. 2018. PRG 320 Standard for performancerated cross-laminated timber. APA-The engineered Wood Association, Tacoma, WA.
  3. ASTM. D198. 2015. Standard test methods of static tests of lumber in structural sizes. American society of testing and materials (ASTM). West Conshohocken, PA.
  4. Badan Pusat Statistik. 2017. Statistic of forest production. Jakarta, Indonesia.
  5. Brandner, R., Flatscher, G., Ringhofer, A., Schickhofer, G., Thiel, A. 2016. Cross laminated timber (CLT): overview and development. European Journal of Wood and Wood Products 74: 311-351.
  6. Choi, C., Yuk, C.R., Yoo, J.C., Park, J.Y., Lee, C.G., Kang, S.G. 2015. Physical and mechanical properties of cross laminated timber using plywood as core layer. Journal of the Korean Wood Science and Technology 43(1): 86-95. https://doi.org/10.5658/WOOD.2015.43.1.86
  7. Chio, C., Kojima, E., Kim, K.J., Yamasaki, M., Sasaki, Y., Kang, S.G. 2018. Analysis of mechanical properties of cross-laminated timber(CLT) with plywood using Korean larch. Bioresources 13(2): 2715-2726.
  8. Choi, Y.S., Park, J.H., Lee, J.H., Shin, J.H., Jang, S.W., Kim, H.G. 2018. Preparation of EVA/Intumescent/Nano-Clay Composite with Flame Retardant Properties and Cross Laminated Timber(CLT). Journal of the Korean Wood Science and Technology 46(1): 73-84. https://doi.org/10.5658/WOOD.2018.46.1.73
  9. Gong, M., 2019. Lumber-Based Mass Timber Products in Construction. Timber Buildings and Constructions. 1:20
  10. Hegde, M., Palanisamy, K., Yi, J.S. 2013. Acacia mangium Wild: A Fast Growing Tree for Tropical Plantation. Journal of Forest Science 29(1): 1-14 https://doi.org/10.7747/JFS.2013.29.1.1
  11. Hong, M.K., Park, B.D., Kim, K.H., Shim, K.B. 2017. Performance of Melamine-Urea-Formaldehyde Resin Adhesives at Various Melamine Contents for Bonding Glued Laminated Timber Under High Frequency Heating. Journal of the Korean Wood Science and Technology 45(4): 409-418. https://doi.org/10.5658/WOOD.2017.45.4.409
  12. Inoue, M., Park, K.G. 2006. Application of new connecting system of wood structures using bamboo connector. Journal of the Korean Association for Spatial Structures 6(2): 7-12.
  13. Kang, C.W., Jang, S.S., Kang, H.Y., Li, C. 2019. Sound Absorption Rate and Sound Transmission Loss of CLT Wall Panels Composed of Larch Square Timber Core and Plywood Cross Band. Journal of the Korean Wood Science and Technology 47(1): 33-39. https://doi.org/10.5658/WOOD.2019.47.1.33
  14. Korea Forest Service. 2019. Overseas Plantation Status (http://forest.go.kr/newkfsweb/html/HtmlPage.do?pg=/resource/resource_050502.html&mn=KFS_02_01_06_05_02)
  15. Krisnawati, H., Kallio, M., Kanninen, M. 2011. Acacia Mangium Wild.: Ecology, Silviculture and Productivity. CIFOR, Bogor, Indonesia.
  16. Lee, B.H., Jeong, D.S., Kim, C.W., Park, S.H., Kim, Y.C. 2018. Influence of the chemical treatment of bamboo fiber(BF) on physical properties of BF and PP/PE composites. Applied Chemistry for Engineering 29(2): 168-175. https://doi.org/10.14478/ace.2017.1118
  17. Lee, H.H., Han, K.S., Kim, G.E. 2002. Characteristics of particleboards made from three-months-old domestics bamboo(Phyllostacbys nigra var benonis stapf). Journal of the Korean Wood Science and Technology 30(1): 11-17.
  18. Lee, I.H., Song, Y.J., Hong, S.I. 2017. Evaluation of The Moment Resistance of Reinforced Wooden Gusset to Glulam Joint. Journal of the Korean Wood Science and Technology 45(1): 53-61. https://doi.org/10.5658/WOOD.2017.45.1.53
  19. Lee, I.H., Song, Y.J., Hong, S.I. 2017. Evaluation of Moment Resistance of Rigid Frame with Glued Joint. Journal of the Korean Wood Science and Technology 45(1): 28-35. https://doi.org/10.5658/WOOD.2017.45.1.28
  20. Liu, D.G., Song, J.W., Anderson, D.P., Chang, P.R., Hua, Y. 2012. Bamboo fiber and its reinforced composites: structure and properties. Cellulose 19: 1449-1480. https://doi.org/10.1007/s10570-012-9741-1
  21. MGB Architecture and Design, Equilibrium Consulting, LMDG Limited, BTY Group. 2012. The case for tall wood buildings, British Columbia, Canada.
  22. Oh, J.K., Kim, G.C., Kim, K.M., Lee, J.J., Hong, J.P. 2017. End Distance of Single-shear Screw Connection in Cross Laminated Timber. Journal of the Korean Wood Science and Technology 45(6): 746-752. https://doi.org/10.5658/WOOD.2017.45.6.746
  23. Pang, S.J., Kim, K.M., Park, S.H., Lee, S.J. 2017. Bending Behavior of Nailed-Jointed Cross-Laminated Timber Loaded Perpendicular to Plane. Journal of the Korean Wood Science and Technology 45(6): 728-736. https://doi.org/10.5658/WOOD.2017.45.6.728
  24. Park, S.H., Jang, J.H., Wistara, N.J., Hidayat, W. 2018. Anatomical and Physical Properties of Indonesian Bamboo Carbonized at Different Temperatures. Journal of the Korean Wood Science and Technology. 46(6): 656-669. https://doi.org/10.5658/WOOD.2018.46.6.656
  25. Robertson, A. 2007. A comparative life cycle assessment of mid-rise office building construction alternatives : Laminated timber or reinforced concrete. Master's Thesis, University of Toronto, Canada.
  26. Son, Y.M., Kim, H., Lee, H.Y., Kim, C.M., Kim, C.S., Kim, J.W., Joo, R.W., Lee, K.H. 2010. Stand yield table and commercial timber volume of eucalyptus pellita and acacia mangium plantations in Indonesia. Journal of Korean Forestry Society 99(1): 9-15.
  27. Song, Y.J., Hong, S.I. 2016. Evaluation of Bonding Strength of Larch Cross-Laminated Timber. Journal of the Korean Wood Science and Technology 44(4): 607-615. https://doi.org/10.5658/WOOD.2016.44.4.607
  28. Sythud, P., Zhang, Y., Mukete, B. 2015. Bamboo Resources Utilization : A Potential Source of Income to Support Rural Livelihoods. Applied Ecology and Environmental Science 3(6): 176-183.
  29. Wang, Z., Fu, H., Gong, M., Luo, J., Dong, W., Wang, T., Chui, Y.H. 2017. Planar shear and bending properties of hybrid CLT fabricated with lumber and LVL. Construction Building Materials. 151: 172-177. https://doi.org/10.1016/j.conbuildmat.2017.04.205