DOI QR코드

DOI QR Code

A simplified algorithm for conceptual estimation of the material quantities of rubble-mound breakwaters

  • Sadeghi, Kabir (Civil and Environmental Engineering Faculty, Near East University) ;
  • Nouban, Fatemeh (Civil and Environmental Engineering Faculty, Near East University)
  • 투고 : 2019.03.12
  • 심사 : 2019.12.30
  • 발행 : 2020.03.25

초록

A simplified algorithm is proposed for fast estimation of the material quantities required for the construction of rubble-mound breakwaters. The proposed algorithm is able to employ only the data available at feasibility study phase such as the maximum draught of the design ship selected to transport the cargos to the harbor despite, because at the feasibility phase, information for the planned harbor is likely to be very limited. A linear-constant waterdepth model together with a proposed section configuration for the breakwaters, which is customary for harbors, is considered to calculate the quantity of materials. The numerical simulation of the wave characteristics has been verified using the recorded wave data collected by a buoy installed near the Neka harbor in Caspian Sea waters. A case study has been also applied to four harbors to validate the proposed algorithm. The estimated weights using the proposed linear-constant and multi-linear waterdepth models were compared using the bathymetry maps and layouts of these harbors. A computer program, written in QBasic language, has been developed to simulate the wave characteristics and to estimate the material quantities needed to construct a rubble-mound breakwater. The obtained results show that taking into account the acceptable accuracies normally applied to the feasibility study and conceptual design phases, the proposed algorithm is sufficiently accurate and highly effective for the conceptual estimation of materials' quantities of breakwaters in the feasibility study phase of harbor projects.

키워드

참고문헌

  1. Galiatsatou, P., Makris, C. and Prinos, P. (2018), "Optimized reliability based upgrading of rubble mound breakwaters in a changing climate", J. Marine Sci. Eng., 6(3), 1-30.
  2. Henseler, J., Ringle, C. and Sinkovics, R. (2009), "The use of partial least squares path modeling in international marketing", Adv. Int. Marketing, 20, 277-320, https://doi.org/10.1108/S1474-7979(2009)0000020014.
  3. Ketabdari, M.J., Barzegar, M., Paiin, Lamouki, P. and Moghaddasi A. (2015), "Effects of discontinuous submerged breakwater on water surface elevation", Ocean Syst. Eng., 5(4), 319-329. https://doi.org/10.12989/ose.2015.5.4.319
  4. KEPCO (2001), "Data obtained from Khazar oceanography buoy", Engineering Department, Khazar Exploration of Petroleum Company, Tehran.
  5. Kundapura, S. and Hegde, A.V. (2017), "Current approaches of artificial intelligence in breakwaters - A review", Ocean Syst. Eng., 7(2), 75-87. https://doi.org/10.12989/ose.2017.7.2.075
  6. Lou, Y.F., Luo, C. and Jin, X.L. (2015), "Numerical simulations of interactions between solitary waves and elastic seawalls on rubble-mound breakwaters" Struct. Eng. Mech., 53(3), 393-410. https://doi.org/10.12989/sem.2015.53.3.393
  7. MPO (Management and Planning Organization) (2006), "Loading and Design Considerations", Ports and Marine Structures Design Manual, MPO of Iran, no. 300-1, P 103-105.
  8. Nouban, F. and Sadeghi, K. (2014) "Analytical Model to Find the Best Location for Construction of New Commercial Harbors", Academic Res. Int., 5(6), 20-34.
  9. Nouban, F. (2015), "Analytical models to find the best location and rough estimation of breakwaters' materials for construction of new harbors", PhD Dissertation, Girne American University, Cyprus.
  10. NOREL NAV SUB Group (2012), "Under keel clearance - Policy paper, Guidance to Developers in assessing minimum water depth over devices", http://marine.gov.scot/datafiles/misc/MREP/05/Documents/David/under_keel_clearance_policy_paper.pdf
  11. PMO (Port and Maritime Organization) (1974a), "Existing port facilities", Iran Ports Master Plan, Adibi-Haris Associates, Vol. 3, Iran.
  12. PMO (Port and Maritime Organization) (1974b), "Minor Persian Gulf Ports and Coastal Study, Iran Ports Master Plan, Adibi-Haris Associates, Vol. 11, Iran.
  13. PMO (Port and Maritime Organization) (1995), "Existing port facilities", Final Report of Iran Ports Master Plan, JICA-OCDI-PCI. Vol. 1, Iran.
  14. Pourzangbar, A., Losada, M., Saber, A., Ahari, L.R., Larroude, P., Vaezi, M. and Brocchini, M. (2017), "Prediction of non-breaking wave induced scour depth at the trunk section of breakwaters using Genetic Programming and Artificial Neural Networks", Coastal Eng., 121. 107-118, https://doi.org/10.1016/j.coastaleng.2016.12.008.
  15. Sadeghi, K. (1989), "Design and Analysis of Marine Structures", Published by K.N Toosi University of Technology. Tehran. 46-324.
  16. Sadeghi, K. (2008), "Significant guidance for design and construction of marine and offshore structure", GAU J. Soc. Appl. Sci., 4(7), 67-92.
  17. Sadeghi, K. (2001), "Coasts, Ports and Offshore Structures Engineering" Published by Power and Water University of Technology, ISBN: 964-93442-0-9, Tehran, 63-434.
  18. Sadeghi, K. (2007), "A numerical simulation for predicting sea waves characteristics and downtime for marine and offshore structures Installation operations", GAU J. Soc. Appl. Sci., 3(5),1-12.
  19. Sadeghi, K. and Nouban, F. (2013), "Numerical simulation of sea wave characteristics and its applications on Mediterranean Sea waters", Int. J. Academic Res., 5(1), 126-133. https://doi.org/10.7813/2075-4124.2013/5-1/A.20
  20. Surowski, D. (1989), "Distance between points on the Earth's surface", Kansas State University, http://www.math.ksu.edu/-dbski/writings/haversine.pdf.
  21. US Army Corps of Engineers (2012), "Coastal Engineering Manual (CEM)", Part II, Coastal Hydrodynamics, Publication Number: EM 1110-2-1100, Proponent: CECW-EW.
  22. US Army Coastal Engineering Research Center (1980), "Shore Protection Manual", Volumes 1 and 2, Fourth Edition, Second Printing, Washington.
  23. US Army Corps of Engineers (2011), "Coastal Engineering Manual (CEM)" Part VI, Publication Number: EM 1110-2-1100, Proponent: CECW-EW.
  24. Van Gent M.R.A. (2003), "Recent developments in the conceptual design of rubble mound breakwaters" Conference: Copedec 2003, January 2003, Colombo.
  25. Zhao, H.Y., Jeng, D.-S., Zhang, Y., Zhang, J.-S., Zhang, H.J. and Zhang, C. (2013), "3D numerical model for wave-induced seabed response around breakwater heads", Geomech. Eng., 5(6), 595-611. https://doi.org/10.12989/gae.2013.5.6.595