DOI QR코드

DOI QR Code

Inclination angle influence on noise of cavitating marine propeller

  • Bal, Sakir (Department of Naval Architecture and Marine Engineering, Istanbul Technical University)
  • 투고 : 2019.08.06
  • 심사 : 2020.02.05
  • 발행 : 2020.03.25

초록

In this study, the effects of inclined shaft angle on the hydro-acoustic performance of cavitating marine propellers are investigated by a numerical method developed before and Brown's empirical formula. The cavitating blades are represented by source and vortex elements. The cavity characteristics of the blades such as cavitation form, cavity volume, cavity length etc., are computed at a given cavitation number and at a set advance coefficient. A lifting surface method is applied for these calculations. The numerical lifting surface method is validated with experimental results of DTMB 4119 model benchmark propeller. After calculation of hydrodynamic characteristics of the cavitating propeller, noise spectrum and overall sound pressure level (OASPL) are computed by Brown's equation. This empirical equation is also validated with another numerical results found in the literature. The effects of inclined shaft angle on thrust coefficient, torque coefficient, efficiency and OASPL values are examined by a parametric study. By modifying the inclination angles of propeller, the thrust, torque, efficiency and OASPL are computed and compared with each other. The influence of the inclined shaft angle on cavity patterns on the blades are also discussed.

키워드

참고문헌

  1. Abshagen, J., Kuter, D. and Nejedl, V. (2016), "Flow induced interior noise from a turbulent boundary layer of a towed body", Adv. Aircraft Spacecraft Sci. Int. J., 3(1), 259-269. https://doi.org/10.12989/aas.2016.3.3.259
  2. Bal, S. (2011), "A practical technique for improvement of open water propeller performance", Proceedings of the Institution of Mechanical Engineers, Part M, Journal of Engineering for the Maritime Environment, 225, 375-386. https://doi.org/10.1177/1475090211413957
  3. Bal, S. and Guner, M. (2009), "Performance analysis of podded propulsors", Ocean Eng., 36(8), 556-563. https://doi.org/10.1016/j.oceaneng.2009.01.016
  4. Brizzolara, S., Villa, D. and Gaggero, S. (2008), "A Systematic Comparison Between RANS and Panel Methods for Propeller Analysis", Proceedings of the 8th International Conference on Hydrodynamics, Nantes, France.
  5. Brown, N. (1999), "Thruster Noise", Paper presented at Design Session of Dynamic Positioning Conference.
  6. Carlton, J.S. (2012), Marine Propellers and Propulsion, Oxford: Elsevier (Butterworth-Heinmann) Publication.
  7. Celik, F. and Guner, M. (2006), "Improved lifting line method for marine propeller", Marine Technol., 43, 100-113.
  8. Ekinci, S., Celik, F. and Guner, M. (2010), "A practical noise prediction method for cavitating marine propellers", Brodogradnja, 61, 359-366.
  9. Gaggero, S., Villa, D. and Brizzolara, S. (2010), "RANS and panel method for unsteady flow propeller analysis", J. Hydrodynamics, 22(5), 564-569. https://doi.org/10.3969/j.issn.1000-4874.2007.05.006
  10. Greely, D.S. and Kerwin, J.E. (1982), "Numerical methods for propeller design and analysis in steady flow", T. SNAME, 90, 415-453.
  11. Griffin, P.E. and Kinnas, S.A. (1998), "A design method for high-speed propulsor blades", J. Fluids Eng., 120, 556-562. https://doi.org/10.1115/1.2820698
  12. ITTC (International Towing Tank Conference) (2014), Guideline of Specialist Committee on Hydrodynamic Noise. Denmark: ITTC Publications.
  13. Kerwin, J.E. and Hadler, J.B. (2010), Principles of Naval Architecture Series: Propulsion, Society of Naval Architects and Marine Engineers (SNAME) Publications, Virginia, USA.
  14. Kerwin, J.E. and Lee, C.S. (1978), "Prediction of steady and unsteady marine propeller performance by numerical lifting surface theory", T. SNAME, 86, 218-258.
  15. Kerwin, J.E., Keenan, D.P., Black, S.D. and Diggs, J.D. (1994), "A coupled viscous/potential flow design method for wake-adapted, multi-stage, ducted propulsors using generalized geometry", T. SNAME, 102, 23-56.
  16. Kinnas, S.A. (1991), "Leading-edge corrections to the linear theory of partially cavitating hydrofoils", J. Ship Ship Res., 35(1), 15-27. https://doi.org/10.5957/jsr.1991.35.1.15
  17. Kinnas, S.A. and Pyo, S. (1999), "Cavitating propeller analysis including the effects of wake alignment", J. Ship Res., 43, 38-47. https://doi.org/10.5957/jsr.1999.43.1.38
  18. Kinnas, S.A., Griffin, P., Choi, J.K. and Kosal, E.M. (1998), "Automated design of propulsor blades for high-speed ocean vehicle applications", T. SNAME, 106, 213-240.
  19. Krasilnikov, V.I., Zhang, Z. and Hong, F. (2009), "Analysis of unsteady blade forces by RANS", Paper presented at the First International Symposium on Marine Propulsors, Trondheim, Norway.
  20. Kuiper, G. and Jessup, S.D. (1993), "A propeller design method for unsteady conditions", T. SNAME, 101, 247-273.
  21. Lidtke, A.K., Humphrey, V.F. and Turnock, S.R. (2016), "Feasibility study into a computational approach for marine propeller noise and cavitation modelling", Ocean Eng., 120, 152-159. https://doi.org/10.1016/j.oceaneng.2015.11.019
  22. Manouchehrinia, B., Molloy, S., Dong, Z., Gulliver, A. and Gough, C. (2018). "Emission and life-cycle cost analysis of hybrid and pure electric propulsion systems for fishing boats", J. Ocean Technol., 13(2), 64-87.
  23. NASA (National Advisory of Space Agency) (1996), Acoustic Noise Requirement. California: NASA Publications, No: PD-ED-1259.
  24. Renick, D. H. (2001), "Unsteady Propeller Hydrodynamics", PhD Dissertation, Massachusetts Institute of Technology, Cambridge, MA, USA.
  25. Sakamoto, N. and Kamiirisa, H. (2018), "Prediction of near field propeller cavitation noise by viscous CFD with semi-empirical approach and its validation in model and full scale", Ocean Eng., 168, 41-59. https://doi.org/10.1016/j.oceaneng.2018.08.061
  26. Seol, H., Jung, B., Suh, J.C. and Lee, S. (2002), "Prediction of non-cavitating underwater propeller noise", J. Sound Vib., 257(1), 131-156. https://doi.org/10.1006/jsvi.2002.5035
  27. Seol, H., Suh, J.C. and Lee, S. (2005), "Development of hybrid method for the prediction of underwater propeller noise", J. Sound Vib., 288(1-2), 345-360. https://doi.org/10.1016/j.jsv.2005.01.015
  28. Sezen, S. and Bal, S. (2019), "A Computational investigation of noise spectrum due to cavitating and non-cavitating propellers", Proceedings of the Institution of Mechanical Engineers, Part M, Journal of Engineering for the Maritime Environment, DOI: 10.1177/1475090219892368, 1-14.
  29. Soydan, A. and Bal, S. (2019), "A practical method for propeller noise", Naval Architect, RINA, May: 50-51.
  30. Su, Y. and Kinnas, S.A. (2017), "A BEM/RANS interactive method for predicting contra-rotating propeller performance", Ocean Syst. Eng., 7(4), 329-344. https://doi.org/10.12989/OSE.2017.7.4.329
  31. Szantyr, J.A. (1994), "A method for analysis of cavitating marine propellers in non-uniform flow", Int. Shipbuild. Progress, 41, 223-242.
  32. Tani, G., Viviani, M., Villa, D. and Ferrando, M. (2018), "A study on the influence of hull wake on model scale cavitation and noise tests for a fast twin screw vessel with inclined shaft", Proceedings of the Institution of Mechanical Engineers, Part M, Journal of Engineering for the Maritime Environment, 232, 307-330. https://doi.org/10.1177/1475090217693418
  33. Yilmaz, N., Khorasanchi, M. and Atlar, M. (2017), "An investigation into computational modelling of cavitation in a propeller's slipstream", Proceedings of the 5th International Symposium on Marine Propulsion, Espoo, Finland.
  34. Yoshimura, Y. and Koyanagi, Y. (2004), "Design of a small fisheries research vessel with low level of underwater-radiated noise", J. Marine Acoust. Soc. Japan, 31(3), 137-145. https://doi.org/10.3135/jmasj.31.137