Journal of the Microelectronics and Packaging Society (마이크로전자및패키징학회지)

The Korean Microelectronics and Packaging Society (한국마이크로전자및패키징학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Adherend Thickness on Adhesive Strength between Organic Adhesive and Metal Adherend

고분자 접착제와 금속 피착재의 접착강도에 미치는 피착재 두께의 영향

  • Ha, Yungeun (Division of Materials Science and Engineering, Pusan National University) ;
  • Sim, Jun-Hyung (Division of Materials Science and Engineering, Pusan National University) ;
  • Baeg, Ju-Hwan (Division of Materials Science and Engineering, Pusan National University) ;
  • Kim, Min-Kyun (Division of Materials Science and Engineering, Pusan National University) ;
  • Cho, Young-Rae (Division of Materials Science and Engineering, Pusan National University)
  • 하윤근 (부산대학교 재료공학부) ;
  • 심준형 (부산대학교 재료공학부) ;
  • 백주환 (부산대학교 재료공학부) ;
  • 김민균 (부산대학교 재료공학부) ;
  • 조영래 (부산대학교 재료공학부)
  • Received : 2020.12.07
  • Accepted : 2020.12.11
  • Published : 2020.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

It is important to measure the quantitative adhesive strength between an organic adhesive and a metal adherend. In measuring the adhesive strength between an organic adhesive and a metal adherend, the effect of the kind and thickness of the adherend on the adhesive strength was studied. Two kinds of metal adherends were selected, aluminum (Al1050) and stainless steel (STS304), and a dolly test and a lap shear test were used to measure the adhesive strength. When measuring the adhesive strength between the organic adhesive and the metal adherend by the tensile stress mode of dolly test, the change in the thickness of the metal adherend had little effect on the adhesive strength, however, the adhesive strength was different depending on the kind of the adherend. On the other hand, when measuring the adhesive strength between the organic adhesive and the metal adherend by the lap shear test, the change in the relative thickness of the metal adherend had an effect on the adhesive strength. The reason is that the bending phenomenon of the adherend occurring in the edge of bonding region during the lap shear test contributes to lowering the adhesive strength by generating additional tensile stress in the bonding region. From this work, it is concluded that the dolly test could be widely used when measuring the quantitative adhesive strength of organic adhesives and metal adherend because there is little change in adhesive strength even though the thickness of the adherend is changed.

고분자 재료인 접착제와 금속 피착재 사이의 정량적인 접착강도 측정은 중요하다. 고분자 재료인 접착제와 금속 피착재 사이의 접착강도 측정 시, 피착재의 종류와 두께 변화가 접착강도에 미치는 영향에 대해 연구하였다. 금속 피착재의 종류로는 알루미늄과 스텐리스강 2종류가 선택되었으며, 접착강도의 측정에는 돌리테스트와 전단시험이 사용되었다. 인장응력 방식의 돌리테스트로 고분자 접착제와 금속 피착재 사이의 접착강도 측정 시, 금속 피착재의 두께 변화는 접착강도의 크기에 거의 영향을 미치지 않았으나, 피착재의 종류에 따라 접착강도는 다르게 나타났다. 반면, 전단시험으로 고분자 접착제와 금속 피착재 사이의 접착강도 측정 시, 금속 피착재의 상대적 두께 변화는 접착강도의 크기에 영향을 주었다. 이유는 전단시험 시 접착부의 모서리 부분에서 발생하는 피착재의 휘어짐 현상은 접착부에 추가적인 인장응력을 발생시켜 접착강도를 낮추는데 기여하기 때문이다. 이 연구의 결과, 돌리테스트는 피착재의 두께가 변해도 접착강도의 변화가 거의 없기 때문에 고분자 접착제와 금속 피착재의 정량적인 접착강도 측정 시 널리 사용될 것으로 예상된다.

Keywords

References

  1. S. W. Lee, J. W. Park, C. H. Park, and H. J. Kim, "Enhanced Optical Properties and Thermal Stability of Optically Clear Adhesives", Int. J. Adhes. Adhes., 50, 93 (2014). https://doi.org/10.1016/j.ijadhadh.2013.12.029
  2. K. Y. Kang and J. M. Lee, "Experimental Study on Evaluation of Bonding Strength of Adhesively Bonded Joints by Adhesive", Journal of KWJS, 30(6), 545 (2012).
  3. M. S. Kim, H. Y. Kim, S. H. Yoo, J. H. Kim, and J. K. Kim, "Effect of Curing Agent on the Curing Behavior and Joint Strength of Epoxy Adhesive", Journal of KWJS, 29(4), 416 (2011).
  4. S. J. Kim, "Apparatus on Corrosion Protection and Marine Corrosion of Ship", J. Kor. Inst. Surf. Eng., 44(3), 105 (2011). https://doi.org/10.5695/JKISE.2011.44.3.105
  5. M. Y. Shon, Effects of Residual White Rust of Inorganic Zinc Silicate Primer on Corrosion Protection of Epoxy-Coated Carbon Steel", J. Ind. Eng. Chem., 16, 523 (2010). https://doi.org/10.1016/j.jiec.2010.03.029
  6. S. B. Lyon, R. Bingham, and D. J. Mills, "Advances in Corrosion Protection by Organic Coatings: What We Know and What We Would Like to Know", Pro. Org. Coat., 102, 2 (2017). https://doi.org/10.1016/j.porgcoat.2016.04.030
  7. J. Schulz, F. Vennemann, and G. Nothacker, "Zn-Mg-Al HotDip Galvanized Coatingd for Exposed Parts on the Automotive Industry", Proc. 10th International Conference on Zinc and Zinc Alloy Coated Steel., Toronto, Ontario, Galvatech, AIST, 153 (2015).
  8. Y. H. Baek, S. M. Son, and C. S. Park, "A Study on Affecting Factors by Using Dolly in Coating Adhesion Test", Corros. Sci. Tech., 13(5), 186 (2014). https://doi.org/10.14773/cst.2014.13.5.186
  9. S. Khoee and Z. Kachoei, "Design and Development of Novel Reactive Amine Nanocontainers for a Self-Healing Epoxy Adhesive: Self-Repairing Investigation using the Lap Shear Test", RCS Adv., 5, 21023 (2015).
  10. B. I. Noh, J. B. Lee, S. H. Won, and S. B. Jung, "Characteristics of Reliability for Flip Chip Package with Non-conductive paste", J. Microelectron. Packag. Soc., 14(4), 9 (2007).
  11. D. J. KIm, D. H. Lee, J. M. Koo, S. J. Song, C. S, Seok, and M. Y. Kim, "Evaluation of Bond Strength of Isothermally Aged Plasma Sprayed Thermal Barrier Coating", Trans. Korean Soc. Mech. Eng., A32(7), 569 (2008).
  12. M. Y. Shon, J. H. Kim, and J. H. Kim, "Experimental Examination for Effect of Voids on Bonding Performance in Cryogenic Temperature Condition", Composites Research, 22(2), 14 (2009).
  13. D. Rahmatabadi, M. Tayyebi, A, Sheikhi, and R. Hashemi, "Fracture Toughness Investigation of Al1050/Cu/MgAZ31ZB Multi-Layered Composite Produced by Accumulative Roll Bonding Process", Mater. Sci. Eng., A734, 427 (2018).
  14. S. Yoon, J. F. Tu, J. H. Lee, G. E. Yang, and S. D. Mun, "Effect of the Magnetic Pole Arrangement on the Surface Roughness of STS 304 by Magnetic Abrasive Machining", Int. J. Precis. Eng. Manuf., 15(7), 1275 (2014). https://doi.org/10.1007/s12541-014-0467-x
  15. J. H. Baeg, H. Park, S. I. Lee, Y. Ha, and Y. R. Cho, "Study on Influencing Factors of Adhesive Strength for Polymer Coating on Metal Adherend by Dolly Test", J. Microelectron. Packag. Soc., 26(2), 1 (2019). https://doi.org/10.6117/KMEPS.2019.26.2.001
  16. S. Chataigner, J. F. Caron, K. Benzarti, M. Quiertant, and C. Aubagnac, "Use of a Single Lap Shear Test to Characterize Composite-to-Concrete or Composite-to-Steel Bonded Interfaces", Construct. Build Mater., 25, 468 (2011). https://doi.org/10.1016/j.conbuildmat.2010.08.009
  17. D. Astm, "4541 Standard Test Method for Pull-Off Strength of Coatings using Portable Adhesion Tester", Annual Book of ASTM Standards, pp.1-13, ASTM International (2002).
  18. N. Y. Chung, "A Study on Strength Evaluation of Adhesive Joints Report, Stress Analysis and Fracture Strength of Adhesive Single-Lap Joint", Trans. Korean Soc. Mech. Eng., 16(4), 667 (1992). https://doi.org/10.22634/KSME.1992.16.4.667