DOI QR코드

DOI QR Code

반응표면분석법을 이용한 제진기의 목메임 방지 개선 및 레이크 최적화

A Study on the Optimization of Anti-Jamming Trash Screen with Rake using by Response Surface Method

  • 투고 : 2020.02.03
  • 심사 : 2020.03.06
  • 발행 : 2020.03.31

초록

제진기는 배수펌프장, 하수처리장, 발전소 등 유입 수로 전단에 설치되어 부유 협잡물의 유입을 차단하는 장치이다. 제진기의 스크린 사이의 협잡물이 끼는 목메임 현상과 노끈류가 제거되지 못하여 물의 유입로의 감소 또는 제진기 파손을 유발하는 문제점이 발생하고 있다. 본 논문에서는 목메임과 노끈류 끼임으로 인한 파손이 주로 발생하는 에이프런을 제거하고 스크린을 확장하여 대체하였다. 그리고 스크린 사이 공간에 내측 레이크를 추가하여 목메임과 노끈류를 제거하도록 개선하는 확장형 레이크를 사용하는 방식으로 설계하였다. 기존의 제진기 레이크의 허용응력을 만족하는 내측 레이크를 설계하기 위하여 레이크 수직 길이와 보강단면의 두께 값을 변수로 하여 실험계획법에 따라 실험점을 결정하고, 구조해석 툴인 ANSYS static structural module과 통계분석 툴인 R software를 이용하여 반응표면분석법에 따른 형상 최적화를 진행하였다. 결정된 최적 설계점 레이크 길이 210.2mm와 보강단면 두께 2mm에서 반응표면분석법 결과와 구조해석의 결과의 상대 오차는 1.63% 이다. 파일럿 제진기를 실제 크기로 제작하여 실증 실험을 수행하였으며 97%이상 목메임과 노끈류를 제거가 가능함을 확인하였다.

A trash screen is installed in front of the inflow channel of a drainage pumping station, sewage treatment plant, and a power plant to block floating contaminants. The bottleneck phenomenon, which decreases the water inflow, causes damage to the damper as a result of clogging in between the screen if string type obstacles are not removed. In this paper, the apron was removed, and the screen was expanded, to prevent breakage of the bottleneck phenomenon and string type obstacles. This was designed using an extended rake by adding an inner rake in between the screen interspace to remove the bottleneck phenomenon and string type obstacles. To design the inner rake that satisfies the allowable stresses of the existing damper rake, the experiment points were determined according to the experimental design method using the inner rake vertical length and the thickness of the reinforced section as parameters. The use of the ANSYS static structural module and statistical analysis tool R software gives the optimized shape according to the response surface method. The relative error between the response surface analysis results and the simulation results was 1.63% of the determined optimal design-point rake length of 210.2 mm and the reinforcement section thickness of 2 mm. Through empirical experiments, a test rake was constructed to the actual size, and approximately 97% of the bottleneck phenomenon and string type obstacles could be removed.

키워드

참고문헌

  1. T. J. Lho, "A study on design and structural strength anlysis for the rake of rotary screeners", Journal of the Korea Academia-Industrial cooperation society, Vol.18, No.1, pp.210-215, Jan 2017. DOI: https://doi.org/10.5762/KAIS.2017.18.1.210
  2. S. M. Yun, Y.S. Kim, H. J. Shin, S. C. Ko, "A Numerical Study for Optimum Design of Dust Separator Screen Based on Coanda Effect", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 6, pp.177-185, Dec 2018. DOI: http://dx.doi.org/10.14775/ksmpe.2018.17.6.177
  3. D. W. Park, "The Dynamic Safety Analysis of the Rotary Circulating Type Automatic Screener using the Auxiliary Elastic Member", Proceedings of The Korean Society of Mechanical Engineers, The Korean Society of Mechanical Engineers, Republic of Korea, pp. 2634-2639, Dec 2013.
  4. Y. Y. Kim, J. I. Lee, G, B, Kwon, I. H. Cha, "A Study on Development of Fixed Screen Cleaner of Paldang 2 Intake Pump Station", Proceedings of Korea Society for Fluid Machinery, Korean Society for Fluid Machinery, Republic of Korea, pp. 601-606, Dec 2008.
  5. Korea Rural Community Corporation, KDS 67 30 30 : 2018, Korean Society of Agricultural Engineer, Korean Design Standard, Republic of Korea, pp. 28.
  6. K. K. Jung, M. B. Chan, "Development of Self-Controlled Screen for Effective Operation and Management in Canal, Ministry of Agriculture", Food and Rural Affairs, Republic of Korea, pp. 103-104, Oct. 2004.
  7. Ibrahim, H. M., Yusoff, W. M. W., Hamid, A. A., Illias, R. M., Hassan, O., Omar, O., "Optimization of medium for the production of ${\beta}$-cyclodextrin glucanotransferase using Central Composite Design (CCD)", Process Biochemistry , Vol.40, No.2, pp. 753-758, Feb. 2005. DOI: https://doi.org/10.1016/j.procbio.2004.01.042
  8. S. Sugashini, K. M. Meera Sheriffa Begum, "Optimization using central composite design (CCD) for the biosorption of Cr (VI) ions by cross linked chitosan carbonized rice husk (CCACR)", Clean Technologies and Environmental Policy , Vol.15, No.2, pp. 293-302, Jan. 2013. DOI: https://doi.org/10.1007/s10098-012-0512-3
  9. M. A. Bezerra, R. E. Santelli, E. P. Oliveira, L. S. Villar, L. A. Escaleira, "Response surface methodology (RSM) as a tool for optimization in analytical chemistry", Talanta, Vol.76, No.5, pp. 965-977, May 2008. DOI: https://doi.org/10.1016/j.talanta.2008.05.019