DOI QR코드

DOI QR Code

Seismic resilience evaluation of RC-MRFs equipped with passive damping devices

  • 투고 : 2019.11.06
  • 심사 : 2020.01.04
  • 발행 : 2020.03.25

초록

The use of passive energy dissipation devices has been widely used in the construction industry to minimize the probability of damage occurred under intense ground motion. In this study, collapse margin ratio (CMR) and fragility curves are the main parameters in the assessment to characterize the collapse safety of the structures. The assessment is done on three types of RC frame structures, incorporating three types of dampers, viscoelastic, friction, and BRB dampers. The Incremental dynamic analyses (IDA) were performed by simulating an array of 20 strong ground motion (SGM) records considering both far-field and near-field seismic scenarios that were followed by fragility curves. With respect to far-field ground motion records, the CMR values of the selected frames indicate to be higher and reachable to safety margin more than those under near-field ground motion records that introduce a high devastating impact on the structures compared to far-field excitations. This implies that the near field impact affects the ground movements at the site by attenuation the direction and causing high-frequency filtration. Besides that, the results show that the viscoelastic damper gives better performance for the structures in terms of reducing the damages compared to the other energy dissipation devices during earthquakes.

키워드

과제정보

연구 과제 주관 기관 : Universiti Sains Malaysia

This study is financially supported by Universiti Sains Malaysia, under the Research University Individual (RUI) Grant Scheme (8014080).

참고문헌

  1. Agency, F.E.M. (2000), "Prestandard and commentary for the seismic rehabilitation of buildings", Am. Soc. Civil Eng. (ASCE).
  2. Alwaeli, W., Mwafy, A., Pilakoutas, K. and Guadagnini, M. (2017), "A methodology for defining seismic scenario-structure-based limit state criteria for rc high-rise wall buildings using net drift", Earthq. Eng. Struct. Dyn., 46(8), 1325-1344. https://doi.org/10.1002/eqe.2858.
  3. Alih, S.C., Vafaei, M., Ismail, N. and Pabarja, A. (2018), "Experimental study on a new damping device for mitigation of structural vibrations under harmonic excitation", Earthq. Struct., 14(6), 567-576. https://doi.org/10.12989/eas.2018.14.6.567.
  4. Asano, M., Masahiko, H. and Yamamoto M. (2000), "The experimental study on viscoelastic material dampers and the formulation of analytical model", Proceedings of the 12th World Conference on Earthquake Engineering.
  5. ASCE, A. (2010). Minimum design loads for buildings and other structures, Reston, V.A. U.S.A.
  6. Casapulla, C. (2015), "On the resonance conditions of rigid rocking blocks", Int. J. Eng. Technol., 7(2), 760-771.
  7. Cetin, H., Aydin, E. and Ozturk, B. (2017), "Optimal damper allocation in shear buildings with tuned mass dampers and viscous dampers", Int. J. Earthq. Impact Eng., 2, 89-120. https://doi.org/10.1504/IJEIE.2017.089038.
  8. Cetin, H., Aydin, E. and Ozturk, B. (2019), "Optimal design and distribution of viscous dampers for shear building structures under seismic excitations", Front. Built Environ., 5, 1-13. https://doi.org/10.3389/fbuil.2019.00090.
  9. Code, U.B. (1997), UBC-97, Structural Engineering Design Provisions, International conference of building officials, Whittier, California. U.S.A.
  10. Costanzo, S., D'Aniello, M. and Landolfo, R. (2018), "The influence of moment resisting beam-to-column connections on seismic behavior of chevron concentrically braced frames", Soil Dyn. Earthq. Eng., 113, 136-147. https://doi.org/10.1016/j.soildyn.2018.06.001.
  11. Deierlein, G.G., A.B. Liel, C.B. Haselton and C.A. Kircher (2007), "Assessing building system collapse performance and associated requirements for seismic design". SEAOC convention (Tahoe, CA).
  12. FEMA, F. (1997). "NEHRP guidelines for the seismic rehabilitation of buildings, Federal Emergency Management Agency Washnigton, DC".
  13. FEMA, F.E.M.A. (2009). "Quantification of building seismic performance factors, Washington, D.C", U.S.A.
  14. Ghowsi, A.F. and Sahoo, D.R. (2013), "Seismic performance of buckling-restrained braced frames with varying beam-column connections", Int. J. Steel Struct., 13(4), 607-621. https://doi.org/10.1007/s13296-013-4003-0.
  15. Guan, X., Burton, H. and Moradi, S. (2018), "Seismic performance of a self-centering steel moment frame building: From component-level modeling to economic loss assessment", J. Construct. Steel Res., 150, 129-140. https://doi.org/10.1016/j.jcsr.2018.07.026.
  16. Hamidia, M., Filiatrault, A. and Aref, A. (2014), "Simplified seismic sidesway collapse capacity-based evaluation and design of frame buildings with linear viscous dampers", J. Earthq. Eng., 18(4), 528-552. https://doi.org/10.1080/13632469.2013.876948.
  17. Hessabi, R.M., Mercan, O. and Ozturk, B. (2017), "Exploring the effects of tuned mass dampers on the seismic performance of structures with nonlinear base isolation systems", Earthq. Struct., 12(3), 285-296. https://doi.org/10.12989/eas.2017.12.3.285.
  18. Hoveidae, N. (2019), "Multi-material core as self-centering mechanism for buildings incorporating BRBs", Earthq. Struct., 16(5), 589-599. https://doi.org/10.12989/eas.2019.16.5.589.
  19. He, Z., Wang, Z. and Zhang, Y. (2018), "Collapse safety margin and seismic loss assessment of RC frames with equal material cost", Struct. Des. Tall Spec. Build., 27(1), e1407. https://doi.org/10.1002/tal.1407.
  20. IBC, I. (2006), "International building code", International Code Council, Inc. (formerly BOCA, ICBO and SBCCI) 4051: 60478-65795.
  21. Ibrahim, Y.E. and El-Shami, M.M. (2011), "Seismic fragility curves for mid-rise reinforced concrete frames in Kingdom of Saudi Arabia", IES J. Part A: Civil Struct.Eng., 4(4), 213-223. https://doi.org/10.1080/19373260.2011.609325.
  22. Juni, P., Gupta, S. and Patel, V. (2017), "Nonlinear dynamic time history analysis of multistoried RCC residential G+23 building for different seismic intensities", Int. J. Eng. Res. Sci., 3(3), 1-8.
  23. Kammula, V., Erochko, J., Kwon, O.S. and Christopoulos, C. (2014), "Application of hybrid-simulation to fragility assessment of the telescoping self-centering energy dissipative bracing system", Earthqu. Struct. Dyn., 43(6), 811-830. https://doi.org/10.1002/eqe.2374.
  24. Karamanci, E. and Lignos, D.G. (2014), "Computational approach for collapse assessment of concentrically braced frames in seismic regions", J. Struct. Eng. 140(8), A4014019. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001011.
  25. Kassem, M.M., Nazri, F.M. and Farsangi, E.N. (2019), "On the quantification of collapse margin of a retrofitted university building in Beirut using a probabilistic approach", Eng. Sci. Technol., Int. J., 15(5) https://doi.org/10.1016/j.jestch.2019.05.003.
  26. Kim, J. and Choi, H. (2004), "Behavior and design of structures with buckling-restrained braces", Eng. Struct., 26(6), 693-706. https://doi.org/10.1016/j.engstruct.2003.09.010
  27. Kim, J. and Kim, S. (2017), "Performance-based seismic design of staggered truss frames with friction dampers", Thin-Walled Struct., 111, 197-209. https://doi.org/10.1016/j.tws.2016.12.001.
  28. Kitayama, S. and Constantinou, M.C. (2016), "Design and analysis of buildings with fluidic self-centering systems", J. Struct. Eng., 142(11), 04016105. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001583.
  29. Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M. (2017), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. http://www.dspace.uce.edu.ec/handle/25000/14271. https://doi.org/10.12989/EAS.2017.13.6.531
  30. Lavan, O. (2015), "Optimal design of viscous dampers and their supporting members for the seismic retrofitting of 3D irregular frame structures", J. Struct. Eng., 141(11), 04015026. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001261.
  31. Losanno, D., Hadad, H.A. and Serino, G. (2017), "Seismic behavior of isolated bridges with additional damping under far-field and near fault ground motion", Earthq. Struct., 13(2), 119-130. https://doi.org/10.12989/eas.2017.13.2.119.
  32. Maley, T.J., Sullivan, T.J. and G.D. Corte (2010), "Development of a displacement-based design method for steel dual systems with buckling-restrained braces and moment-resisting frames", J. Earthq. Eng., 14(S1), 106-140. https://doi.org/10.1080/13632461003651687.
  33. Manie, S., Moghadam, A.S. and Ghafory-Ashtiany, M. (2015), "Collapse behavior evaluation of asymmetric buildings subjected to bi-directional ground motion", Struct. Des. Tall Spec. Build., 24(8), 607-628. https://doi.org/10.1002/tal.1202.
  34. Putrajaya: Department of Standards Malaysia (2017), Malaysia National Annex to MS EN 1998-1:2017, Eurocode 8: Design of structures for earthquake resistance- Part 1: General Rules, seismic actions and rules for buildings.
  35. Marko, J., Thambiratnam, D. and Perera, N. (2004), "Influence of damping systems on building structures subject to seismic effects", Eng. Struct., 26(13), 1939-1956. https://doi.org/10.1016/j.engstruct.2004.07.008.
  36. Montgomery, M. and Christopoulos, C. (2014), "Experimental validation of viscoelastic coupling dampers for enhanced dynamic performance of high-rise buildings", J. Struct. Eng., 141(5), 04014145. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001092.
  37. Ou, X.Y., He, Z. and Ou, J.P. (2014), "Parametric study on collapse margin ratio of structure", J.Central South Univ., 21(6), 2477-2486. https://doi.org/10.1007/s11771-014-2202-2.
  38. Ou, X.Y., He, Z. and Ou, J.P. (2014), "Seismic collapse margin of structures using modified mode-based global damage model",
  39. Qamaruddin, S. (2017), "Seismic response study of multi-storied reinforced concrete building with fluid viscous dampers", M.E Dissertation, Chaitanya Bharathi Institute of Technology, India.
  40. Sani, H.P., Gholhaki, T.J. and Banazadeh, M. (2017), "Seismic performance assessment of isolated low-rise steel structures based on loss estimation", J. Perform. Construct. Facilities, 31(4), 04017028. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001028.
  41. Seo, C.Y., Karavasilis, T.L., Ricles, J.M and Sause, R. (2014), "Seismic performance and probabilistic collapse resistance assessment of steel moment resisting frames with fluid viscous dampers." Earthq. Eng. Struct. Dyn., 43(14): 2135-2154. https://doi.org/10.1002/eqe.2440
  42. Shinozuka, M., Feng, M., Kim, H., Uzawa, T. and Ueda, T. (2003), "Statistical analysis of fragility curves. Report." Multidisciplinary Center for Earthquake Engineering Research, MCEER-03-0002.
  43. Silwal, B., Ozbulut, O.E. and Michael, R.J. (2016), "Seismic collapse evaluation of steel moment resisting frames with superelastic viscous damper", J. Construct. Steel Res., 126, 26-36. https://doi.org/10.1016/j.jcsr.2016.07.002.
  44. Soong, T.T. and Spencer Jr, B.F (2002), "Supplemental energy dissipation: state-of-the-art and state-of-the-practice", Eng. Struct., 24(3), 243-259. https://doi.org/10.1016/S0141-0296(01)00092-X.
  45. Sun, Q., Bo, J., and Dias, D. (2019), "Viscous damping effects on the seismic elastic response of tunnels in three sites", Geomech. Eng., 18(6), 639-650. https://doi.org/10.12989/gae.2019.18.6.639.
  46. Symans, M., Charney, F., Whittaker, A., Constantinou, M., Kircher, C., Johnson, M. and McNamara, R. (2008), "Energy dissipation systems for seismic applications: current practice and recent developments", J. Struct. Eng., 134(1), 3-21. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(3).
  47. Teran-Gilmore, A., Ruiz-Garcia, J. and Bojorquez-Mora, E (2015), "Flexible frames as self-centering mechanism for buildings having buckling-restrained braces", J. Earthq. Eng., 19(6), 978-990. https://doi.org/10.1080/13632469.2015.1011813
  48. Teran-Gilmore, A. and Virto, N. (2009), "Displacement-based preliminary design of low-rise buildings stiffened with buckling-restrained braces", Earthq. Spectra, 25, 185-211. https://doi.org/10.1193/1.3054638
  49. Tohidian, M and Manafpour, A (2015), "Evaluation of collapsed margin for RC frames designed based on Iranian seismic code", 7th International Conference on Seismology & Earthquake Engineering.
  50. Tubaldi, E., Barbato, M. and Dall'Asta, A. (2015), "Efficient approach for the reliability-based design of linear damping devices for seismic protection of buildings", ASCE-ASME J. Risk Uncert. Eng. Syst., Part A: Civil Eng,, 2(2), C4015009. https://doi.org/10.1061/AJRUA6.0000858.
  51. Vamvatsikos, D. and Cornell, C.A (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141.
  52. Vision (2000), Performance Based Seismic Engineering of Buildings: pt. 3. Preliminary Northridge lessons. pt. 4. Moving the blue book toward performance-based engineering, Structural Engineers Association of California.
  53. Wongpakdee, N. and Leelataviwat, S. (2017). "Influence of column strength and stiffness on the inelastic behavior of strong-column-weak-beam frames", J. Struct. Eng., 143(9), 04017124. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001864.
  54. Xie, Q. (2005), "State of the art of buckling-restrained braces in Asia", J. Construct. Steel Res., 61(6), 727-748. https://doi.org/10.1016/j.jcsr.2004.11.005.
  55. Xu, Z.D., Shen, Y.P. and Zhao, H.T. (2003), "A synthetic optimization analysis method on structures with viscoelastic dampers", Soil Dyn. Earthq. Eng., 23(8), 683-689. https://doi.org/10.1016/j.soildyn.2003.07.003.
  56. Yang, Y., Liu, R., Xue, Y. and Li, H. (2017), "Experimental study on seismic performance of reinforced concrete frames retrofitted with eccentric buckling-restrained braces (BRBs)", Earthq. Struct., 12(1), 79-89. https://doi.org/10.12989/eas.2017.12.1.079.
  57. Zhang, L., Su, M., Zhang, C., Shen, H., Islam M.M. and Zhang, R. (2019), "A design method of viscoelastic damper parameters based on the elastic-plastic response reduction curve", Soil Dyn. Earthq. Eng., 117, 149-163. https://doi.org/10.1016/j.soildyn.2018.09.050.
  58. Zhu, S. and Zhang, Y. (2008), "Seismic analysis of concentrically braced frame systems with self-centering friction damping braces", J. Struct. Eng., 134(1), 121-131. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(121).

피인용 문헌

  1. Effect of sequential earthquakes on evaluation of non-linear response of 3D RC MRFs vol.20, pp.3, 2021, https://doi.org/10.12989/eas.2021.20.3.279
  2. A hybrid seismic isolation system toward more resilient structures: Shaking table experiment and fragility analysis vol.38, 2020, https://doi.org/10.1016/j.jobe.2021.102194