Abstract
Based on the airborne measurement results over a coal fired power plant and steel work in Dangjin city, SO2 emission amounts of each site are estimated (top-down emission). Airborne measurements were carried out on May-June and October-November 2019. The estimated SO2 emission in 2019 for the power plant was 1502.1 kg/hr and that for the steel work was 2850.5 kg/hr, higher as much as a factor of 2.5 and 2.0, respectively, than the emission amounts provided by both facilities (bottom-up emission). The outcomes strongly illustrates that well designed airborne observations can serve a quantitative diagnostic tool for bottom-up emission estimates. Further research direction to improve the reliability of the top-down emission estimates is suggested.
충청남도 대형사업장에서의 대기오염물질 배출이 미세먼지 농도에 미치는 영향에 대한 논란이 많다. 2019년 봄과 가을에 항공관측을 수행하여 충청남도 대형사업장 상공에서 대기오염물질 농도를 측정하였고, 이를 바탕으로 황산화물(SO2) 배출량을 산정하였다(하향식 배출량). 이를 사업장에서 제시한 배출량 자료(상향식 배출량)와 비교한 결과, 항공관측에 바탕을 둔 배출량이 더 많았다. 항공관측에 바탕을 둔 배출량은 석탄화력발전소는 1502.1 kg/hr, 제철소는 2805.5 kg/hr였다. 이는 사업장에서 밝힌 2019년 연평균 배출량보다 각각 2.5배와 2.0배 큰 값이다. 이와 같은 차이가 나는 원인을 규명하기 위해서는 관측에 바탕을 둔 하향식 배출량과 활동도에 바탕을 둔 기존의 상향식 배출량을 산정함에 있어서 보다 면밀한 검토와 개선이 필요하다. 하향식 배출량의 개선을 위해서는 관측 불확도를 줄이는 것이 중요하다. 불확도를 높이는 요소의 하나는 지상에서 항공기가 운행될 수 있는 최저 고도까지 관측을 하지 않은 것이다. 이러한 불확도를 줄이는 방법은 지상에서 관측을 수행하며, 더 나아가서는 지상과 항공기 관측 최저 고도 사이에서 드론 등의 방법을 통해 관측을 수행하는 것이다. 바람장 역시 관측 및 외삽과 내삽을 이용하여 평면 분포를 구하면 평면에 대한 적분을 이용하여 평면 전체의 플럭스를 구할 수 있어 불확도를 줄일 수 있을 것이다. 상향식 배출량의 정확도 개선을 위해서는 측정이 이루어지고 있는 굴뚝의 배출량 자료 정확도 개선과 함께, 관측이 이루어지고 있지 않은 배출구의 현황 파악이 필요하다.