DOI QR코드

DOI QR Code

고압 인젝터의 분사율 예측을 위한 경량 모델 개발

Development of a Lightweight Prediction Model of Fuel Injection Rates from High Pressure Fuel Injectors

  • 투고 : 2020.09.02
  • 심사 : 2020.10.15
  • 발행 : 2020.12.31

초록

To meet stringent emission regulations of automotive engines, fuel injection control techniques have advanced based on reliable and fast computing prediction models. This study aims to develop a reliable lightweight prediction model of fuel injection rates using a small number of input parameters and based on simple fluid dynamic theories. The prediction model uses the geometry of the injector nozzle, needle motion data, injection conditions and the fuel properties. A commercial diesel injector and US No. 2 diesel were used as the test injector and fuel, respectively. The needle motion data were measured using X-ray phase-contrast imaging technique under various fuel injection pressures and injection pulse durations. The actual injector rate profiles were measured using an injection rate meter for the validation of the model prediction results. In the case of long injection durations with the steady-state operation, the model prediction results showed over 99 % consistency with the measurement results. However, in the case of short injection cases with the transient operation, the prediction model overestimated the injection rate that needs to be further improved.

키워드

과제정보

이 논문은 2020년도 정부(과학기술정보통신부)의 재원으로 한국연구재단 중견연구자 지원사업의 지원을 받아 수행된 연구임 (2020R1A2C1009884)

참고문헌

  1. J. Kim, J. Lee and K. Kim, "Numerical study on the effects of fuel viscosity and density on the injection rate performance of a solenoid diesel injector based on AMESim", Fuel, Vol. 256, 2019, p. 115912. https://doi.org/10.1016/j.fuel.2019.115912
  2. F. J. Salvador, A. H. Plazas and J. Gimeno, "Complete modelling of a piezo actuator last-generation injector for diesel injection systems", Vol. 15, No. 1, 2015, pp. 3-19. https://doi.org/10.1177/1468087412455373
  3. S. Yokobe, T. Oda, K. Ohsawa, T. Sumi, S. Sugata and K. Yabuta, "Spray Characteristics and Inside Flow of a Marine Diesel Injector", SAE Tech. Pap., 2015, 2015-01-0838.
  4. J. P. Viera et al., "Linking instantaneous rate of injection to X-ray needle lift measurements for a direct-acting piezoelectric injector", Energy Convers. Manag., Vol. 112, 2016, pp. 350-358. https://doi.org/10.1016/j.enconman.2016.01.038
  5. W. Huang, S. Moon, Y. Gao, Z. Li and J. Wang, "Eccentric needle motion effect on near-nozzle dynamics of diesel spray", Fuel, Vol. 206, 2017, pp. 409-419. https://doi.org/10.1016/j.fuel.2017.06.012
  6. W. Huang, S. Moon and K. Ohsawa, "Near-nozzle dynamics of diesel spray under varied needle lifts and its prediction using analytical model", Fuel, Vol. 180, 2016, pp. 292-300. https://doi.org/10.1016/j.fuel.2016.04.042
  7. L. Postrioti, G. Buitoni, F. C. Pesce and C. Ciaravino, "Zeuch method-based injection rate analysis of a common-rail system operated with advanced injection strategies", Fuel, Vol. 128, 2014, pp. 188-198. https://doi.org/10.1016/j.fuel.2014.03.006
  8. B. D. Nikolic, B. KEGL, S. D. Markovic, M. S. Mitrovic, "Determining the Speed of Sound, Density and Bulk Modulus of Rapeseed Oil, Biodiesel, and Diesel Fuel", Thermal Science, Vol. 16, 2012, pp. S569-S579.