DOI QR코드

DOI QR Code

Seismic retrofit of steel buildings using external resistant RC walls and friction dampers

  • 투고 : 2020.03.04
  • 심사 : 2020.08.17
  • 발행 : 2020.12.25

초록

In this research, the idea of improving the seismic response of an existing steel structure with use of friction dampers between external walls and the structure is discussed. The main difference of this method with other methods of seismic rehabilitation is that interior spaces of the existing structure remain untouched and new parts including external walls and dampers are added outside of the structure. Three frames having 3, 6 and 9 stories are modeled in SAP2000 software before and after seismic retrofit and responses of the system are investigated under the effect of seven earthquake records. Initially, different ratios of seismic weight of stories are presumed for slip forces of the dampers with a distribution based on given equations. The optimized capacity of dampers is obtained by investigating the average of maximum displacement, acceleration and base shear of the structure caused by earthquakes. For this optimized values, maximum inter-story drifts and acceleration are obtained through numerical models. Results show that in 3, 6 and 9-story frames peak roof displacement decreased up to 80%. Maximum roof acceleration and base shear of the frames also decreased 46, 40 and 32% and 84, 67 and 65%, respectively for three building structures.

키워드

참고문헌

  1. Anoushehei, M., Daneshjoo, F., Mahboubi, S. and Khazaeli, S. (2017), "Experimental investigation on hysteretic behavior of rotational friction dampers with new friction materials", Steel Comp. Struct., 24(2), 239-248. https://doi.org/10.12989/scs.2017.24.2.239.
  2. ANSI /AISC 360-16 (2016), Specification for structural steel buildings, American Institude of Steel Construction; Chicao, IL, USA.
  3. ASCE/SEI 7-16 (2016), Minimum design loads and associated criteria for buildings and other structures, American Society of Civil Engineers; Reston, VA, USA.
  4. ASCE/SEI 41-17 (2017), Seismic evaluation and retrofit of existing buildings, American Society of Civil Engineers; Reston, VA, USA.
  5. Bakeri, A.E. (2012), "Optimal design of hysteretic dampers connecting 2-MDOF adjacent structures for random excitations", Int. J. Eng., 6(3), 184-200.
  6. Bayat, M. and Bayat, M. (2014), "Seismic behavior of special moment-resisting frames with energy dissipating devices under near source ground motions", Steel Comp. Struct, 16(5), 533-557. https://doi.org/10.12989/scs.2014.16.5.533.
  7. Benedetti, A., Landi, L. and Merenda, D.G. (2014), "Displacement-based design of an energy dissipating system for seismic upgrading of existing masonry structures", J. Earthq. Eng, 18(4), 477-501. https://doi.org/10.1080/13632469.2014.897274.
  8. Bhaskararao, A.V. and Jangid, R.S. (2006), "Seismic analysis of structures connected with friction dampers", Eng. Struct., 28(5), 690-703. https://doi.org/10.1016/j.engstruct.2005.09.020.
  9. Chao, S.H., Goel, S.C. and Lee, S.S. (2007), "A seismic design lateral force distribution based on inelastic state of structures", Earthq. Spectra, 23(3), 547-569. https://doi.org/10.1193%2F1.2753549. https://doi.org/10.1193%2F1.2753549
  10. Cho, C.G. and Kwon, M. (2004), "Development and modeling of a frictional wall damper and its applications in reinforced concrete frame structures", Earthq. Eng. Struct. Dyn., 33(7), 821-838. https://doi.org/10.1002/eqe.379.
  11. Constantinou, M., Mokha, A. and Reinhorn, A. (1990), "Teflon bearings in base isolation II: Modeling", J. Struct. Eng., 116(2), 455-474. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:2(455).
  12. Filiatrault, A. and Cherry, S. (1990), "Seismic design spectra for friction-damped structures", J. Struct. Eng., 116(5), 1334-1355. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1334).
  13. Gioiella, L., Tubaldi, E., Gara, F., Dezi, L. and Dall'Asta, A. (2018a), "Stochastic seismic analysis and comparison of alternative external dissipative systems", Shock and Vib., 2018. https://doi.org/10.1155/2018/5403737.
  14. Gioiella, L., Tubaldi, E., Gara, F., Dezi, L. and Dall'Asta, A. (2018b), "Modal properties and seismic behaviour of buildings equipped with external dissipative pinned rocking braced frames", Eng. Struct., 172, 807-819. https://doi.org/10.1016/j.engstruct.2018.06.043.
  15. Impollonia, N. and Palmeri, A. (2018), "Seismic performance of buildings retrofitted with nonlinear viscous dampers and adjacent reaction towers", Earthq. Eng. Struct. Dyn., 47(5), 1329-1351. https://doi.org/10.1002/eqe.3020.
  16. Kim, J., Kim, M. and Nour Eldin, M. (2017), "Optimal distribution of steel plate slit dampers for seismic retrofit of structures", Steel Comp. Struct, 25(4), 473-484. https://doi.org/10.12989/scs.2017.25.4.473.
  17. Lavan, O. and Abecassis, D. (2015), "Seismic behavior and design of wall-EDD-frame systems", Front. Built Environ., 1, 1-7. https://doi.org/10.3389/fbuil.2015.00007.
  18. Lee, S.H., Park, J.H., Lee, S.K. and Min, K.W. (2008a), "Allocation and slip load of friction dampers for a seismically excited building structure based on story shear force distribution", Eng. Struct., 30(4), 930-940. https://doi.org/10.1016/j.engstruct.2007.03.020.
  19. Lee, S.K., Park, J.H., Moon, B.W., Min, K.W., Lee, S.H. and Kim, J. (2008b), "Design of a bracing-friction damper system for seismic retrofitting", Smart Struct. Sys., 4(5), 685-696. https://doi.org/10.12989/sss.2008.4.5.685.
  20. Mazza, F. (2014), "Displacement-based seismic design of hysteretic damped braces for retrofitting in-plan irregular rc framed structures", Soil Dyn. Earthq. Eng., 66, 231-240. https://doi.org/10.1016/j.soildyn.2014.07.001.
  21. Mazza, F., & Labernarda, R. (2017). "Structural and non-structural intensity measures for the assessment of base-isolated structures subjected to pulse-like near-fault earthquakes". Soil Dyn. Earthq. Eng., 96, 115-127. https://doi.org/10.1016/j.soildyn.2017.02.013.
  22. Mazza, F., & Vulcano, A. (2013), "Nonlinear seismic analysis to evaluate the effectiveness of damped braces designed for retrofitting rc framed structures", Int. J Mech, 7(3), 251-261.
  23. Mualla, I.H. and Belev, B. (2002), "Performance of steel frames with a new friction damper device under earthquake excitation", Eng. Struct., 24(3), 365-371. https://doi.org/10.1016/S0141-0296(01)00102-X.
  24. Murase, M., Tsuji, M. and Takewaki, I. (2013), "Smart passive control of buildings with higher redundancy and robustness using base-isolation and inter-connection", Earthq. Struct., 4(6), 649-670. http://dx.doi.org/10.12989/eas.2013.4.6.649.
  25. Nour Eldin, M., Kim, J. and Kim, J. (2018), "Optimum distribution of steel slit-friction hybrid dampers based on life cycle cost", Steel Comp. Struct., 27(5), 633-646. https://doi.org/10.12989/scs.2018.27.5.633.
  26. Pall, A.S. and Marsh, C. (1982), "Response of friction damped braced frames", J. Struct. Eng., 108(9), 1313-1323.
  27. Passoni, C., Belleri, A., Marini, A. and Riva, P. (2014), "Existing structures connected with dampers: state of the art and future developments", 2nd European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey, August
  28. Soong, T.T. and Dargush, G.F. (1997), Passive Energy Dissipation Systems in Structural Engineering, Wiley, Buffalo, NY, USA.
  29. Trombetti, T. and Silvestri, S. (2007), "Novel schemes for inserting seismic dampers in shear-type systems based upon the mass proportional component of the Rayleigh damping matrix", J. Sound Vib., 302(3), 486-526. https://doi.org/10.1016/j.jsv.2006.11.030.
  30. Vafai, A., Hamidi, M. and Ahmadi, G. (2001), "Numerical modeling of MDOF structures with sliding supports using rigidplastic link", Earthq. Eng. Struct. Dyn., 30(1), 27-42. https://doi.org/10.1002/1096-9845(200101)30:1%3C27::AIDEQE992%3E3.0.CO;2-H.
  31. Yang, Y.B., Lee, T.Y. and Tsai, I. (1990), "Response of multi-degree-of-freedom structures with sliding supports", Earthq, Eng. Struct. Dyn., 19(5), 739-752. https://doi.org/10.1002/eqe.4290190509.
  32. Zahrai, S.M., Moradi, A. and Moradi, M. (2015), "Using friction dampers in retrofitting a steel structure with masonry infill panels", Steel Comp. Struct., 19(2), 309-325. https://doi.org/10.12989/scs.2015.19.2.309.
  33. Zahrai, S.M. (2015), "Cyclic testing of chevron braced steel frames with IPE shear panels", Steel Comp. Struct, 19(5), 1167-1184. https://doi.org/10.12989/scs.2015.19.5.1167.

피인용 문헌

  1. Towards optimal slip force and stiffness distribution in designing friction dampers vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.289