Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Comparison of Shear Bond Strength of Veneer Ceramics to Co-Cr Alloys Produced by Selective Laser Melting and Casting Technique

선택적 레이저 용융 그리고 전통적인 주조 기술에 의해 제조된 Co-Cr 합금에 대한 전장용 세라믹의 전단 결합 강도 비교

  • Hong, Min-Ho (Department of Dental Laboratory Science, College of Health Sciences, Catholic University of Pusan)
  • 홍민호 (부산가톨릭대학교 치기공학과)
  • Received : 2020.07.22
  • Accepted : 2020.12.04
  • Published : 2020.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Selective laser melting (SLM) manufactures an alloy using laser as a heat source, and has recently been introduced in the dental industry. However, there is a lack of analytical research on metal-ceramic restorations achieved by SLM. This study evaluates and compares the metal-ceramic bond strength of Co-Cr alloys produced by selective laser melting and casting methods. Co-Cr samples required for this study were produced through the sintering process of ceramics, by applying the SLM and CAST methods. The metal-ceramic bond strength was measured by applying the shear bond strength test. In order to determine the area fraction of adherent ceramic, Si content of the specimen was measured using scanning electron microscopy SEM/ EDS. Results of the metal-ceramic bond strength and AFAC were analyzed by t-test (α = 0.05). No significant difference was observed comparing the bond strength of SLM and CAST Co-Cr alloys (P> 0.05). However, the SLM group had much better ceramic adherence than the CAST group (P < 0.001). Moreover, oxidation characteristics were similar for both SLM and CAST Co-Cr alloys, but metal structures were different. These results imply that although the bond of ceramic and Co-Cr alloy is not related to the manufacturing method, SLM alloys impart better ceramic adherence. This indicates that alloys made with SLM can be used to fabricate upper implant prostheses in the future. In particular, it is expected to overcome the shortcomings of the CAST method, and save time and cost.

최근, 치과 산업에서 레이저를 열원으로 합금을 제조하는 선택적 레이저 용융법(Selective laser melting, SLM)이 소개되고 있다. 하지만 SLM으로 제작된 금속-세라믹 수복물에 대한 연구가 부족한 실정이다. 따라서 본 연구의 목적은 SLM 그리고 CAST(casting)에 의해 제조된 Co-Cr 합금의 금속-세라믹(metal-ceramic) 결합 강도(bond strength)를 평가하는 것이다. SLM 그리고 CAST 방법을 사용하여 Co-Cr 시편을 제조하고 세라믹을 소결하여 시료를 제작하였다. 연구의 실험은 표본 준비 및 분석을 통해 2020년 1월부터 6월까지 수행되었다. 금속-세라믹 결합 강도는 만능 시험기에 의해 측정되었다. 부착 세라믹의 면적분(The area fraction of adherence ceramic, AFAC)은 SEM/EDS로 시편의 Si 함량을 측정하였다. 금속-세라믹 결합 강도 및 AFAC 결과는 t-test를 사용하여 분석하였다(α = .05). SLM 그리고 CAST Co-Cr 합금 사이의 결합 강도에 대해서는 유의한 차이가 발견되지 않았다(P>.05). SLM은 CAST 그룹보다 많은 세라믹 부착성(ceramic adherence)을 나타냈다(P<.001). 세라믹과 합금의 결합 강도는 제조 방법엥 영향을 받지 않았다. 그러나 SLM은 더 우수한 세라믹 부착성을 보였다. 이는 향후 임플란트 상부 보철물 제작에도 SLM으로 제작한 합금이 사용 가능한 것을 시사한다. CAST 방식의 단점을 극복하고 시간과 비용을 절약할 수 있을 것으로 기대된다.

Keywords

References

  1. T. R. Walton, "The up to 25-year survival and clinical performance of 2,340 high gold-based metal-ceramic single crowns", International Journal of Prosthodontics, Vol.26, No.2, pp.151-160, Mar. 2013. DOI: http://dx.doi.org/10.11607/ijp.3136
  2. A. Ortorp, A. Ascher, P. Svanborg, "A 5-year retrospective study of cobalt-chromium-based single crowns inserted in a private practice", International Journal of Prosthodontics, Vol.25, No.5, pp.480-483, Sep. 2012.
  3. E. Tamac, S. Toksavul, M. Toman, "Clinical marginal and internal adaptation of CAD/CAM milling, laser sintering, and cast metal ceramic crowns", The Journal of prosthetic dentistry, Vol.112, No.4, pp.909-913, Oct. 2014. DOI: http://dx.doi.org/10.1016/j.prosdent.2013.12.020
  4. M. N. Aboushelib, W. A. Elmahy, M. H. Ghazy, "Internal adaptation, marginal accuracy and microleakage of a pressable versus a machinable ceramic laminate veneers", Journal of dentistry, Vol.40, No.8, pp.670-677, Aug. 2012. DOI: http://dx.doi.org/10.1016/j.jdent.2012.04.019
  5. K. A. Mumtaz, P. Erasenthiran, N. Hopkinson, "High density selective laser melting of Waspaloy®", Journal of materials processing technology, Vol.195, No1-3, pp.77-87, Jan. 2008. DOI: http://dx.doi.org/10.1016/j.jmatprotec.2007.04.117
  6. X. W. Ren, L. Zeng, Z. M. Wei, X. Z. Xin, B. Wei, "Effects of multiple firings on metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting", The Journal of prosthetic dentistry, Vol.115, No.1, pp.109-114, Jan. 2016. DOI: http://dx.doi.org/10.1016/j.prosdent.2015.03.023
  7. X. Z. Xin, J. Chen, N. Xiang, B. Wei. "Surface properties and corrosion behavior of Co-Cr alloy fabricated with selective laser melting technique", Cell biochemistry and biophysics, Vol.67, No.3, pp.983-990, Dec. 2013. DOI: http://dx.doi.org/10.1007/s12013-013-9593-9
  8. N. Xiang, X. Z. Xin, J. Chen, B. Wei, "Metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting", Journal of dentistry, Vol.40, No.6, pp.453-457, Jun. 2012. DOI: http://dx.doi.org/10.1016/j.jdent.2012.02.006
  9. P. Kohorst, J. Junghanns, M. P. Dittmer, L. Borchers, M. Stiesch, "Different CAD/CAM-processing routes for zirconia restorations: influence on fitting accuracy", Clinical oral investigations, Vol.15, No.4, pp.527-536, Aug. 2011. DOI: http://dx.doi.org/10.1007/s00784-010-0415-9
  10. Y. S. Al Jabbari, T. Koutsoukis, X. Barmpagadaki, S. Zinelis, "Metallurgical and interfacial characterization of PFM Co-Cr dental alloys fabricated via casting, milling or selective laser melting", Dental Materials, Vol.30, No.4, pp.79-88, Apr. 2014. DOI: http://dx.doi.org/10.1016/j.dental.2014.01.008
  11. L. Zeng, N. Xiang, B. Wei, "A comparison of corrosion resistance of cobalt-chromium-molybdenum metal ceramic alloy fabricated with selective laser melting and traditional processing", The Journal of prosthetic dentistry, Vol.112, No.5, pp.1217-1224, Nov. 2014. DOI: http://dx.doi.org/10.1016/j.prosdent.2014.03.018
  12. M. Asakura, Y. Kominami, T. Tsuruta, T. Kawai, "The effect of zinc levels in a gold-based alloy on porcelain-metal bonding", Dental Materials, Vol.28, No.5, pp.35-41, May. 2012. DOI: https://doi.org/10.1016/j.dental.2012.02.003
  13. W. X. Ren, L. Zeng, M. Z. Wei, Z. X. Xin, B. Wei, "Effects of multiple firings on metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting", The Journal of prosthetic dentistry, Vol.115, No.1, pp.109-114, Jan. 2016. DOI: https://doi.org/10.1016/j.prosdent.2015.03.023
  14. R. M. Joias, R. N. Tango, J. E. de Araujo, M. A. de Araujo, G. D. Saavedra, T. J. de Arruda Paes-Junior, E. T. Kimpara, "Shear bond strength of a ceramic to Co-Cr alloys", The Journal of prosthetic dentistry, Vol.99, No.1, pp.54-59, Jan. 2008. DOI: http://dx.doi.org/10.1016/S0022-3913(08)60009-8
  15. M. Bagby, S. J. Marshall, G. W. Marshall Jr, "Metal ceramic compatibility: a review of the literature", The Journal of prosthetic dentistry, Vol.63, No.1, pp.21-25, Jan. 1990. DOI: http://dx.doi.org/10.1016/0022-3913(90)90259-F
  16. D. M. Schweitzer, G. R. Goldstein, J. L. Ricci, N. R. Silva, E. L. Hittelman, "Comparison of bond strength of a pressed ceramic fused to metal versus feldspathic porcelain fused to metal", Journal of Prosthodontics: Implant, Esthetic and Reconstructive Dentistry, Vol.14, No.4, pp.239-247, Dec. 2005. DOI: http://dx.doi.org/10.1111/j.1532-849X.2005.00052.x
  17. J. Serra-Prat, J. Cano-Batalla, J. Cabratosa-Termes, O. Figueras-Alvarez, "Adhesion of dental porcelain to cast, milled, and laser-sintered cobalt-chromium alloys: shear bond strength and sensitivity to thermocycling", The Journal of prosthetic dentistry, Vol.112, No.3, pp.600-605, Sep. 2014. DOI: http://dx.doi.org/10.1016/j.prosdent.2014.01.004
  18. E. J. Bae, J. H. Kim, W. C. Kim, H. Y. Kim, "Bond and fracture strength of metal-ceramic restorations formed by selective laser sintering", The journal of advanced prosthodontics, Vol.6, No.4, Aug. 2014. DOI: http://dx.doi.org/10.4047/jap.2014.6.4.266