참고문헌
- Heywood, J. B., Internal Combustion Engine Fundamentals, McGraw-Hill, New York, 1988.
- Choi, J. H. and Park, J. S., "The Way to Implement Tuning Protection of Engine Controller", CICS 2015 information and Control Symposium, pp. 54-56, 2015.
- Yang, H. S., Lim, J. H. and Chun, D. J., Hwang, U., "A Study on Characteristics of Knocking in Gasoline Engine through ECU Control", Journal of the Korea Safety Management and Science, Vol. 10, No. 3, pp. 109-115, 2008.
- Lee, J. S., Lee, J. S, and Ha, J. Y. "A Study on the Method of Air-Fuel Ratio by Immediate Control in SI Engine" Transactions of KSAE, Vol. 6, No. 6, pp. 252-258, 1998.
- Kim, H. M., Ryu J. D. "A Study on the Characteristics of Spray and Combustion in a HCCI Engine according to Various Injection Angles and Timings," Journal of Mechanical Science and Technology, Vol. 21, No. 1 pp. 133-140, 2007. https://doi.org/10.1007/BF03161719
- Morikawa, K., Kaneko, M., Moriyoshi Y. and Sano, M., "A New Combustion Method to suppress Knocking in High Compression Ratio Spark Ignition Engine," Internal Combustion Engine Symposium, pp. 106, 2005.
- Lee, T. H., Chun, K. M., "An Experimental Study of the Effects of Water Vapor in Intake Air on Combustion and Knock Characteristics in a Spark Ignition Engine," Transaction of KSAE, Vol. 6, No. 1, pp. 205-212, 1998.
- Stone, R., Introduction to Internal Combustion Engines, Macmillan, UK, 1992.
- Cho, Y. H., Kim, W. T. and Bae, C. S., "Method of Decreasing the Deviation of Corrected Engine Torque using Knock Correction Rate in Gasoline Engine Performance Test on Dynamometer," Transactions of KSAE, Vol. 16, No. 4, pp. 1-7, 2008.
- Hwang, S. H., Cho, Y. S. and Lee, J. W. "A Study on Fuel Transport Characteristics in a Port Fuel Injected SI Engine during Transient Condition," Transactions of KSAE, Vol. 11, No. 3 pp. 20-27, 2003.