DOI QR코드

DOI QR Code

실부하 적용을 통한 농용 트랙터 변속기 해석

Analysis of Agricultural Tractor Transmission using Actual Farm Workload

  • 김정길 (한국생산기술연구원 지능형농기계연구그룹) ;
  • 박진선 (한국생산기술연구원 지능형농기계연구그룹) ;
  • 최규정 (한국생산기술연구원 지능형농기계연구그룹) ;
  • 이동근 (한국생산기술연구원 지능형농기계연구그룹) ;
  • 신민석 (한국생산기술연구원 안전시스템연구그룹) ;
  • 오주영 (한국생산기술연구원 안전시스템연구그룹) ;
  • 남주석 (강원대학교 바이오시스템기계공학전공)
  • Kim, Jeong-Gil (Smart Agricultural Machinery R&D Group, Korea Institute of Industrial Technology) ;
  • Park, Jin-Sun (Smart Agricultural Machinery R&D Group, Korea Institute of Industrial Technology) ;
  • Choi, Kyu-Jeong (Smart Agricultural Machinery R&D Group, Korea Institute of Industrial Technology) ;
  • Lee, Dong-Keun (Smart Agricultural Machinery R&D Group, Korea Institute of Industrial Technology) ;
  • Shin, Min-Seok (Safety System R&D Group, Korea Institute of Industrial Technology) ;
  • Oh, Joo-Young (Safety System R&D Group, Korea Institute of Industrial Technology) ;
  • Nam, Ju-Seok (Department of Biosystems Engineering, Kangwon National University)
  • 투고 : 2020.05.27
  • 심사 : 2020.06.10
  • 발행 : 2020.11.30

초록

The agricultural tractor is a multi-purpose vehicle, which is frequently used in the agricultural field. It must be highly reliable in terms of human safety. Design and analysis of agricultural tractors must be performed using actual agricultural workload to maintain high reliability. Additionally, the frequency with which various components and systems are used must also be taken into consideration. In this study, a tractor is built to measure its workload in the actual field. Further, the measured load was analyzed for various farming tasks. The range of ratios of consumed power to engine power was measured to be 42.6%-87.2%, 75.1%-97%, 26.5%-59.2% for a plow, rotary, and harvest tasks, respectively. The results were fed into a transmission simulation model to analyze the strength and life of the transmission components. We conclude that a more reliable product can be constructed by incorporating the transmission analyses using the actual load.

키워드

참고문헌

  1. Gerlach, A., "Field Measurement of Tractor Transmission Forces," Transactions of ASAE, Vol. 9, No. 5, pp. 707-712, 1966. https://doi.org/10.13031/2013.40078
  2. Lee, J. S., Yu, H. Y., Lee, G. T. and Kim, D. C., "Analysis of Load Spectrum of 70kW class Tractor for Plowing Operation," Journal of Agriculture and Life Sciences, Vol. 45, No. 1, pp. 18-22, 2014.
  3. Kim, J. H., Kim, K. U., Choi, C. W. and Wu, Y. G., "Severeness of Transmission Loads of Agricultural Tractors," Journal of Biosystems Engineering, Vol. 23, No. 5, pp. 417-426, 1998.
  4. Kim, J. Y. and Park, Y. I., "Analysis of Agricultural Working Load Experiments for Reduction Gear Ratio Design of an Electric Tractor Powertrain," Transactions of KSAE, Vol. 20, No. 5, pp. 138-144, 2012. https://doi.org/10.7467/KSAE.2012.20.5.138
  5. Park, Y. J., Lee, G. H., Nam, Y. Y. and Kim J. G., "Influence of Flexible Pin for Planets on Service Life of Wind Turbine Gearboxes," Transactions of the Korean Society of Mechanical Engineerings-A, Vol. 36, No. 9, pp. 953-960, 2012.
  6. Kim, J. G., Park, Y. J., Lee, G. H. and Kim, J. H., "Effects of Bearing Characteristic on the Gear Load Distribution in the Slewing Reducer for Excavator," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 5, pp. 8-14, 2014. https://doi.org/10.14775/ksmpe.2014.13.5.008
  7. Park, Y. J., Kim, J. G., Lee, G. H., Kim, Y. J. and Oh, J. Y., "Effects of Bearing Characteristic on Load Distribution and Sharing of Pitch Reducer for Wind Turbine," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 1, pp. 55-65, 2016. https://doi.org/10.1007/s40684-016-0008-4
  8. Cho, S. J., Park, Y. J., Han, J. W. and Lee, G. H., "Fatigue Life Prediction of the Carrier of Slewing Reducer for Tower Crane," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 131-140, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.131
  9. International Electrotechnical Commission (IEC), "Wind Turbines-Part 4: Design Requirements for Wind Turbine Gearboxes," IEC 61400-4, 2012.
  10. International Organization for Standardization (ISO), "Calculation of load capacity of spur and helical gears," ISO 6336, 2007.
  11. International Organization for Standardization (ISO), "Cylindrical gears - ISO system of accuracy," ISO 1328, 1995.
  12. KIMM, "HST for agricultural tractor transmission," RS B 0045, 2008.
  13. International Organization for Standardization (ISO), "Calculation of Load Capacity of Bevel Gears," ISO 10300, 2001.
  14. German Institute for Standardization(DIN), "Shafts and axles, calculation of load capacity," DIN 743, 2012.
  15. International Organization for Standardization (ISO), "Rolling bearings - Methods for calculating the modified reference rating life for universally loaded bearings," ISO/TS 16281, 2008.
  16. Germanischer Lloyd WindEnergie GmbH(GL), "Guideline for the Certification of Wind Turbines", GL Wind 2003, 2003.

피인용 문헌

  1. Forging Analysis for Hot Axial Forging of Sub-shift Drive Shaft with Agricultural Machinery Transmission vol.30, pp.3, 2020, https://doi.org/10.7735/ksmte.2021.30.3.197