과제정보
The authors gratefully acknowledge the helpful comments from anonymous reviewers on this study.
참고문헌
- Betegon, C., Penuelas, I., 2006. A constraint based parameter for quantifying the crack-tip stress fields in welded joints. Eng. Fract. Mech. 73, 1865-1877. https://doi.org/10.1016/j.engfracmech.2006.02.012
- Boothman, D.P., Lee, M.M.K., Luxmoore, A.R., 1999. The effects of weld mismatch on J-integrals and Q-values for semi-elliptical surface flaws. Eng. Fract. Mech. 64, 433-458. https://doi.org/10.1016/S0013-7944(99)00091-0
- Bucar, T., Nagode, M., Fajdiga, M., 2006. A neural network approach to describing the scatter of SeN curves. Int. J. Fatig. 28, 311-323. https://doi.org/10.1016/j.ijfatigue.2005.08.002
- Cao, M.S., Pan, L.X., et al., 2015. Neural network ensemble-based parameter sensitivity analysis in civil engineering systems. Neural Comput. Appl. 26, 1-8. https://doi.org/10.1007/s00521-014-1676-z
- Donato, G.H.B., Magnabosco, R., Ruggieri, C., 2009. Effects of weld strength mismatch on J and CTOD estimation procedure for SE(B) specimens. Int. J. Fract. 159, 1-20. https://doi.org/10.1007/s10704-009-9377-9
- Fr Lin, MJ Shaw, 1997. Active training of backpropagation neural networks using the learning by experimentation methodology. Ann. Oper. Res. 75, 105-122. https://doi.org/10.1023/A:1018999110972
- Genel, K., 2004. Application of artificial neural network for predicting strain-life fatigue properties of steel on the basis of tensile tests. Int. J. Fatig. 26, 1027-1035. https://doi.org/10.1016/j.ijfatigue.2004.03.009
- Gy Fu, W Yang, Li, C.Q., 2017. Elastic and fully plastic J-integrals for mixed mode fracture induced by inclined surface cracks in plates under biaxial loading. Eng. Fract. Mech. 186, 483-495. https://doi.org/10.1016/j.engfracmech.2017.10.032
- Gy Fu, W Yang, Li, C.Q., 2017. Stress intensity factors for mixed mode fracture induced by inclined cracks in pipes under axial tension and bending. Theor. Appl. Fract. Mech. 89, 100-109. https://doi.org/10.1016/j.tafmec.2017.02.001
- Hong, C., Chiang, L.P., Elangovan, S., 1999. Wavelet packet analysis and artificial intelligence based adaptive fault diagnosis. In: Power Engineering Conference and IEAust Energy Conference, Darwin, Australia, pp. 192-198.
- Huang, Y.F., Zhou, W.X., 2020. Impacts of residual stresses on J-integral for clamped SE(T) specimens with weld centerline cracks. Theor. Appl. Fract. Mech. https://doi.org/10.1016/j.tafmec.2020.102511 (in press).
- Ince, R., 2004. Prediction of fracture parameters of concrete by artificial neural networks. Eng. Fract. Mech. 71, 2143-2159. https://doi.org/10.1016/j.engfracmech.2003.12.004
- Kim, Y.J., Kim, J.S., Schwalbe, K.H., 2003. Numerical investigation on J-integral testing of heterogeneous fracture toughness testing specimensdpart I: weld metal cracks. Fatig. Fract. Eng. Mater. Struct. 26, 683-694. https://doi.org/10.1046/j.1460-2695.2003.00676.x
- Kirk, M.T., Rh Dodds, 1993. The influence of weld strength mismatch on crack-tip constrain in single edge notch bend specimens. Int. J. Fract. 18, 297-316. https://doi.org/10.1007/BF00013040
- Kobayashi, A.S., Chiu, S.T., Beeuwkes, R., 1973. A numerical and experimental investigation on the use of J-integral. Eng. Fract. Mech. 5, 293-305. https://doi.org/10.1016/0013-7944(73)90024-6
- Kumar, V., German, M.D., Shih, C.F., 1981. An Engineering Approach for ElasticPlastic Fracture Analysis. EPRI, Palo Alto. Report NP-1931.
- Kumar, V., Schumacher, B.I., German, M.D., 1991. Effect of thermal and residual stresses on the J-integral elastic-plastic fracture analysis. Comput. Struct. 40, 487-501. https://doi.org/10.1016/0045-7949(91)90374-U
- Kumar, S., Khan, I.A., Bhasin, V., Singh, R.K., 2014. Characterization of crack-tip stresses in plane-strain fracture specimens having weld center crack. Int. J. Solid Struct. 51, 1464-1474. https://doi.org/10.1016/j.ijsolstr.2013.12.039
- Lee, M.M.K., Boothman, D.P., Luxmoore, A.R., 1999. Effects of biaxial loading on crack driving force and constraints for shallow semi-elliptical surface flaws. Int. J. Fract. 98, 37-54.
- Lei, Y., 2004. J-integral and limit load analysis of semi-elliptical surface cracks in plates under tension. Int. J. Pres. Ves. Pip. 81, 21-30. https://doi.org/10.1016/j.ijpvp.2003.12.004
- Lei, Y., 2004. J-integral and limit load analysis of semi-elliptical surface cracks in plates under bending. Int. J. Pres. Ves. Pip. 81, 31-41. https://doi.org/10.1016/j.ijpvp.2003.12.003
- Lei, Y., 2004. J-integral and limit load analysis of semi-elliptical surface cracks in plates under combined tension and bending. Int. J. Pres. Ves. Pip. 81, 43-56. https://doi.org/10.1016/j.ijpvp.2003.12.002
- Lei, Y., Tao, J., Li, P.N., 1999. Limit load and J estimates of a center cracked plate with an asymmetric crack in a mismatched weld. Int. J. Pres. Ves. Pip. 76, 747-757. https://doi.org/10.1016/S0308-0161(99)00057-5
- Lei, Y., Ainsworth, R.A., 1997. A J integral estimation method for cracks in welds with mismatched mechanical properties. Int. J. Pres. Ves. Pip. 70 (3), 237-245. https://doi.org/10.1016/S0308-0161(96)00035-X
- Li, C.Q., Fu, G.Y., Yang, W., 2016. Stress intensity factors for inclined external surface cracks in pressurized pipes. Eng. Fract. Mech. 165, 72-86. https://doi.org/10.1016/j.engfracmech.2016.08.014
- Li, J.C., Zhao, D.L., et al., 2018. A link prediction method for heterogeneous networks based on BP neural network. Physica A 495, 1-17. https://doi.org/10.1016/j.physa.2017.12.018
- Ling, M., Luo, X., et al., 2017. Numerical modeling and artificial neural network for predicting J-integral of top-down cracking in asphalt pavement. Transport. Res. Rec. 2631, 83-95. https://doi.org/10.3141/2631-10
- McClung, R.C., Chell, G.G., Lee, Y.D., Russel, D.A., Ge, Orient, 1999. ''Development of a Practical Methodology for Elastic-Plastic and Fully Plastic Fatigue Crack Growth". NASA/CR-1999-209428.
- Munoz-Abella, B., Rubio, L., Rubio, P., 2015. Stress intensity factor estimation for unbalanced rotating cracked shafts by artificial neural networks. Fatig. Fract. Eng. Mater. Struct. 38, 352-367. https://doi.org/10.1111/ffe.12237
- Newman, J.C., Raju, I.S., 1981. An empirical stress-intensity factor equation for the surface crack. Eng. Fract. Mech. 15, 185-192. https://doi.org/10.1016/0013-7944(81)90116-8
- Pujol, J.C.F., Pinto, J.M.A., 2011. A neural network approach to fatigue life prediction. Int. J. Fatig. 33 (3), 313-322. https://doi.org/10.1016/j.ijfatigue.2010.09.003
- Ramberg, W., Osgood, W.R., 1943. Description of StresseStrain Curves by Three Parameters. Technical Note No. 902. National Advisory Committee for Aeronautics, Washington DC.
- Rice, J.R., 1968. A path independent integral and the approximate analysis of strain concentration by notches and cracks. J. Appl. Mech. 35, 379-386. https://doi.org/10.1115/1.3601206
- Rubio, L., Munoz-Abella, B., 2010. A neural approach to crack identification in shafts using wave propagation signals. In: Proc. Of the Tenth International Conference on Computational Structures Technology, Valencia, Spain.
- Rumelhart, D.E., Mcclelland, J.L., 1986. Parallel Distributed Processing: Explorations in the Microstructure of Cognition, Vol1-Vol2. MIT press, Cambridge.
- Savioli, R.G., Ruggieri, C., 2013. J and CTOD estimation formulas for C(T) fracture specimens including effects of weld strength overmatch. Int. J. Fract. 179, 109-127. https://doi.org/10.1007/s10704-012-9781-4
- Schwalbe, K.H., et al., 1997. Common views on the effects of yield strength mismatch on testing and structural assessment. In: Schwalbe, K.-H., Kocak, M., et al. (Eds.), Mis-matching of Interfaces and Welds. GKSS Research Centre Publications, Geestthacht, FRG, pp. 99-132.
- Seibi, A., Al-Alawi, S.M., 1997. Prediction of fracture toughness using artificial neural networks (ANNs). Eng. Fract. Mech. 3, 311-319. https://doi.org/10.1016/S0013-7944(96)00076-8
- Shih, C.F., Moran, B., Nakamura, T., 1986. Energy release rate along a threedimensional crack front in a thermally stressed body. Int. J. Fract. 30, 79-102. https://doi.org/10.1007/BF00034019
- Sih, G.C., Lee, Y.D., 1989. Review of triaxial crack border stress and energy behaviour. Theor. Appl. Fract. Mech. 12, 1-17. https://doi.org/10.1016/0167-8442(89)90011-6
- Song, Y., Yu, Z., 2013. Spring back prediction in t-section beam bending process using neural networks and finite element method. Arch. Civil. Mech. Eng. 13, 229-241. https://doi.org/10.1016/j.acme.2012.11.004
- Souza, R.F., Ruggieri, C., 2015. J-dominance and size requirements in strengthmismatched fracture specimens with weld centerline cracks. J. Braz. Soc. Mech. Sci. Eng. 37, 1083-1096. https://doi.org/10.1007/s40430-014-0249-5
- SINTAP, 1999. Structural Integrity Assessment Procedures for European Industry-Final Procedure. European Union Project. No.BE95-1426.
- Toribio, J., Matos, J.C., Gonzalez, B., 2016. Aspect ratio evolution associated with surface cracks in sheets subjected to fatigue. Int. J. Fatig. 92, 588-595. https://doi.org/10.1016/j.ijfatigue.2016.03.028
- ABAQUS. Version 6.14 Documentation, 2014. Dassault Systemes Simulia Corp., Providence, RI, USA.
- Wang, X., 2006. Fully plastic J-integral solutions for surface cracked plates under biaxial loading. Eng. Fract. Mech. 73, 1581-1595. https://doi.org/10.1016/j.engfracmech.2005.12.014
- Yagawa, G., Kitajima, Y., Ueda, H., 1993. Three-dimensional fully plastic solutions for semi-elliptical surface cracks. Int. J. Pres. Ves. Pip. 53, 457-510. https://doi.org/10.1016/0308-0161(93)90073-3
- Zhao, H.S., Lie, S.T., Zhang, Yao, 2018. Strain-based J-estimation scheme for fracture assessment of misaligned clad pipelines with an interface crack. Mar. Struct. 61, 238-255. https://doi.org/10.1016/j.marstruc.2018.06.006
피인용 문헌
- Study on prediction method of crack propagation in absorber weld by experiment and simulation vol.7, 2020, https://doi.org/10.1016/j.egyr.2021.02.022