Acknowledgement
This study was supported by the National Natural Science Foundation of China (Grant No. 51609091), Priority Academic Program Development of Jiangsu Higher Education Institutions and Collegiate Natural Science Fund of Jiangsu Province (14KJA570001) and Collegiate Natural Science Fund Major project of Jiangsu Province (2014CH096J).
References
- ASTM standard E 837-08, 2008. Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method. ASTM International.
- Deng, Dean, Kiyoshima, Shoichi, 2011. FEM analysis of residual stress distribution near weld start/end location in thick plates. Comput. Mater. Sci. 50 (8), 2459-2469. https://doi.org/10.1016/j.commatsci.2011.03.027
- Genchev, Gancho, Doynov, Nikolay, Ossenbrink, Ralf, et al., 2017. Residual stresses formation in multi-pass weldment: a numerical and experimental study. J. Constr. Steel Res. 138, 633-641. https://doi.org/10.1016/j.jcsr.2017.08.017
- Gharibshahiyan, E., Raouf, A.H., Parvin, N., Rahimian, M., 2011. The effect of microstructure on hardness and toughness of low carbon welded steel using inert gas welding. Mater. Des. 32 (4), 2042-2048. https://doi.org/10.1016/j.matdes.2010.11.056
- Goldak, J.A., Akhlaghi, Mehdi, 2005. Computational Welding Mechanics. Springer, Ottawa.
- Hwang, Seyun, Kim, Yooil, Lee, Janghyun, 2016. Finite element analysis of residual stress distribution in a thick plate joined using two-pole tandem electro-gas welding. J. Mater. Process. Technol. 229, 349-360. https://doi.org/10.1016/j.jmatprotec.2015.09.037
- Ion, J.C., Easterling, K.E., 2000. Proceedings of Third Scandanavian Symposium in Material Science. Finland, Oslo, pp. 79-85.
- Ion, J.C., Easterling, K.E., Ashby, M.F., 1984. A second report on diagrams of microstructure and hardnesses for Heat-affected zones in welds. Acta Metall. 32, 1949-1962. https://doi.org/10.1016/0001-6160(84)90176-7
- James, M.N., Hughes, D.J., Chen, Z., Lombard, H., Hattingh, D.G., Asquith, D., Yates, J.R., Webster, P.J., 2007. Residual stresses and fatigue performance. Eng. Fail. Anal. 14 (2), 384-395. https://doi.org/10.1016/j.engfailanal.2006.02.011
- Kasuya, T., Yurioka, N., Okumura, M., 1995. Methods for predicting maximum hardness of heat-affected zone and selecting necessary preheat temperature for steel welding. Nippon Steel Tech. Rep. (4), 7-14.
- Kirkaldy, J.S., Venugopalan, D., 1983. Prediction of microstructure and hardnesse ability in low alloy steels, Phase transformation in Ferrous alloys. Proc. Int. Conf. 4-6.
- Ma, Ninshu, 2015. An accelerated explicit method and GPU parallel computing for thermal stress and welding deformation for large structural models. Int. J. Adv. Manuf. Technol. 87 (5-8), 2195-2211.
- Ma, N., Wang, J., Okumoto, Y., 2015a. Out-of-plane welding distortion prediction and mitigation in stiffened welded structures. Int. J. Adv. Manuf. Technol. 84 (5-8), 1371-1389.
- Ma, Ninshu, Cai, Zhipeng, Deng, Dean, et al., 2015b. Investigation of welding residual stress in flash-butt joint of U71Mn rail steel by numerical simulation and experiment. Mater. Des. 88, 1296-1309. https://doi.org/10.1016/j.matdes.2015.08.124
- Murakawa, H., Ma, N., Huang, H., 2015. Iterative substructure method employing concept of inherent strain for large scale welding problem. Weld. World 59 (1), 53-63. https://doi.org/10.1007/s40194-014-0178-z
- Pagliaro, P., Prime, M.B., Swenson, H., Zuccarello, B., 2010. Measuring multiple residual-stress components using the contour method and multiple cuts. Exp. Mech. 50 (2), 187-194. https://doi.org/10.1007/s11340-009-9280-3
- Prime, M.B., 2000. Cross-sectional mapping of residual stresses by measuring the surface contour after a cut. J. Eng. Mater. Technol. 123 (2), 162-168. https://doi.org/10.1115/1.1345526
- Qiang, Bin, Li, Yadong, Yao, Changrong, et al., 2018. Through-thickness distribution of residual stresses in Q345qD butt-welded steel plates. J. Mater. Process. Technol. 251, 54-64. https://doi.org/10.1016/j.jmatprotec.2017.08.001
- Radaj, D., 2012. Heat Effects of Welding: Temperature Field, Residual Stress, Distortion. Springer Science & Business Media.
- Rangaswamy, P., Griffith, M.L., Prime, M.B., Holden, T.M., Rogge, R.B., Edwards, J.M., Sebring, R.J., 2005. Residual stresses in LENS® components using neutron diffraction and contour method. Mater. Sci. Eng. A 399 (1-2), 72-83. https://doi.org/10.1016/j.msea.2005.02.019
- Wan, Yu, Jiang, Wenchun, Li, Jian, et al., 2017. Weld residual stresses in a thick plate considering back chipping: neutron diffraction, contour method and finite element simulation study. Mater. Sci. Eng. A 699, 62-70. https://doi.org/10.1016/j.msea.2017.05.079
- Wang, J., Rashed, S., Murakawa, H., 2014. FE analysis of buckling behavior caused by welding in thin plates of high tensile strength steel. J. Mater. Eng. Perform. 23(12), 4358-4365. https://doi.org/10.1007/s11665-014-1230-2
- Webster, G.A., Ezeilo, A.N., 2001. Residual stress distributions and their influence on fatigue lifetimes. Int. J. Fatigue 23, 375-383. https://doi.org/10.1016/S0142-1123(01)00133-5
- Withers, P.J., Turski, M., Edwards, L., Bouchard, P.J., Buttle, D.J., 2008. Recent advances in residual stress measurement. Int. J. Press. Vessel. Pip. 85 (3), 118-127. https://doi.org/10.1016/j.ijpvp.2007.10.007
- Xue, W., Lei, H., Qiang, X., et al., 2017. Influence of martensitic transformation on welding residual stress in plates and pipes. Sci. Technol. Weld. Join. 22 (6), 505-511. https://doi.org/10.1080/13621718.2016.1263711
- Yu, Lina, Nakabayashi, Yuma, Sasa, Masato, et al., 2011. Neural network prediction of hardness in HAZ of temper bead welding using the proposed thermal cycle tempering parameter (TCTP). ISIJ Int. 51, 1506-1515. https://doi.org/10.2355/isijinternational.51.1506
Cited by
- New submerged arc welding flux for hardfacing of Hardox steels vol.62, pp.10, 2020, https://doi.org/10.3139/120.111578
- Advanced Welding Manufacturing: A Brief Analysis and Review of Challenges and Solutions vol.142, pp.11, 2020, https://doi.org/10.1115/1.4047947