DOI QR코드

DOI QR Code

Characteristics of Negative Peak Wind Pressure acting on Tall Buildings with Step on Wall Surface

  • Yoshida, Akihito (Department of Architecture Tokyo Polytechnic University) ;
  • Masuyama, Yuka (Wind Tunnel & CFD Department Wind Engineering Institute, CO. LTD.) ;
  • Katsumura, Akira (Wind Tunnel & CFD Department Wind Engineering Institute, CO. LTD.)
  • Published : 2019.12.01

Abstract

Corner cut, corner chamfered or a building shape change are adopted in the design of tall buildings to achieve aerodynamic superiority as well as response reduction. Kikuchi et.al pointed out that large negative peak external pressures can appear near the inside corner of set-back low rise buildings. It is therefore necessary to pay attention to facade design around steps in building surfaces. Peak wind pressures for corner cut or corner chamfered configurations are given in the AIJ code. However, they cannot be applied where there are many variations of vertical and horizontal steps. There has been no previous systematic research on peak wind pressures around steps in building surfaces. In this study, detailed phenomenon of peak wind pressures around steps in buildings are investigated focusing on vertical and horizontal distances from the building's corner.

Keywords

References

  1. Architectural Institute of Japan, Recommendations for Loads on Buildings (2015), Architectural Institute of Japan, 2015.
  2. Bandi E.K., Tanaka H., Kim Y.C., Ohtake K., Yoshida A., Tamura Y. (2013), Peak Pressures Acting on Tall Buildings with Various Configuration, International Journal of High-Rise Buildings, 2(3), 229-244, 2013.
  3. Kikuchi H., Tamura Y., Hibi K. (2010), Peak wind pressure distributions on buildings with a setback, Proceedings of the 24th national symposium on wind engineering, 24, 317-320 (in Japanese)
  4. Ohtake K.(2000), Study on peak external pressure for cladding design of high-rise buildings (Part. 1), Proceedings of AIJ annual meeting, Structure I, 193-194(in Japanese).
  5. Okuda Y., Taniike Y. (1993), Conical Vortices over Side Face of a Three-Dimensional Square Prism, Journal of Wind Engineering and Industrial Aerodynamics, 50, 163-172. https://doi.org/10.1016/0167-6105(93)90071-U
  6. Tanaka H., Tamura Y., Ohtake K., Nakai M., Kim Y.C., Bandi E.K. (2013), Aerodynamic and Flow Characteristics of Tall Buildings with Various Unconventional Con-figurations, International Journal of High-Rise Buildings, 2(3), 213-228, 2013. https://doi.org/10.21022/IJHRB.2013.2.3.213