Korean Chemical Engineering Research

  • 제57권6호
  • /
  • Pages.841-846
  • /
  • 2019
  • /
  • 0304-128X(pISSN)
  • /
  • 2233-9558(eISSN)
한국화학공학회 (The Korean Institute of Chemical Engineers)
권호 표지
DOI QR코드

DOI QR Code

다층구조의 고효율 수처리용 필터 제조

Manufacture of Multi-Layered High Efficiency Water Treatment Filter

  • 손종석 (순천제일대학교 산업기술화공과) ;
  • 정현섭 (순천제일대학교 산업기술화공과) ;
  • 유영상 ((주) 수연테크) ;
  • 홍주희 (순천제일대학교 산업기술화공과)
  • Sonn, Jong Suk (Department of Industrial Technology & Chemical Engineering, Suncheon Jeil College) ;
  • Joung, Hyun-Sub (Department of Industrial Technology & Chemical Engineering, Suncheon Jeil College) ;
  • Yoo, Young-Sang (Suyeon Technology) ;
  • Hong, Joo-Hee (Department of Industrial Technology & Chemical Engineering, Suncheon Jeil College)
  • 투고 : 2019.07.15
  • 심사 : 2019.10.18
  • 발행 : 2019.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 외국제품과 동등 또는 이상의 품질을 가진 고효율성 수처리 필터의 제조와 그 공정을 개발하는데 목적이 있다. 개발된 필터의 여과효율은 93~99%로 기존의 국내산 82~97.5%, 일본산 92.5~98% 보다 우수하거나 유사하였다. 오염 입자의 양에 따른 압력손실(내구성)은 기존의 국내산보다는 현저하게 작았으며 일본산과 비교해도 약 $0.1kg_f/cm^2$의 낮은 압력 손실을 나타내었다. 또한 본 연구에서 개발된 카트리지 필터는 일본산 제품에 비하여 약 50%의 가격으로 생산이 가능하므로 기존의 국내산 제품뿐 아니라 일본산 제품에 대한 수입대체 효과도 기대할 수 있다.

The purpose of this work is to manufacture of high efficiency water-treatment filter that is equal to imported products or even higher in terms of quality and even develop the manufacturing process. The filtration efficiency of the developed filter was 93~99%, which was better or similar to that of domestic filter (82~97.5%) and Japanese filter (92.5~98%). The pressure loss(durability) along with the amount of contaminant particles was significantly smaller than that of domestic products, and showed $0.1kg_f/cm^2$ less than that of Japanese products. In addition, at the cost side of production, the developed cartridge filter can be produced with 50% of the current price compared to that of Japanese products. Therefore, it is possible to replace the imported Japanese products as well as domestic products.

키워드

참고문헌

  1. Bae, M. S., "Improvement of Total-Maximum-Daily-Load Policy in Korea - Equity of Water Quality Standards and Management of Development Plans," Research Report, Chungbuk Development Institute, Korea(2009).
  2. Cha, B. J. and Chi, S. D., "Recent Trends and Prospect in Microfiltration Membrane," KIC News, 14(6), 29-37(2011).
  3. Cha, B. C., Ji, S. D. and Kim, J. H., "Membrane Market for Water Treatment," KIC News, 14(6), 2-8(2011).
  4. Shim, H. S., Lee, Y. M., Nam, S. Y. and Choe, Y, O., "Depth Cartridge Filter for Industrial Liquid Filtration," Membr. J., 19(3), 173-182(2009).
  5. Lim, D. Y. and Choe, Y. O., "Fiber Material for Air Filter," Fiber Technol. Ind., 8(4), 365-377(2004).
  6. Kim, J. T. and Cho, I. H., "Trends in the Technology and Market of Membrane Bioreactors (MBR) for Wastewater Treatment and Reuse and Development Directions," Membr. J., 23(1), 24-44(2013).
  7. Song, I. H., Ha, J. H., Bae, B. S., Park, Y. J., Ko, J. W., Baek, Y. K., Kim, Y. K., Lee, J. G. and Hahn, Y. D., "Research Trend of Ceramic Filter for Water Treatment," J. Korean Powder Metall. Inst., 21(1), 62-71(2014). https://doi.org/10.4150/KPMI.2014.21.1.62
  8. http://smroadmap.smtech.go.kr/0201/view/m_code/A330/id/1822/idx/1300.
  9. Song, S. P., Lee, J. K. and Ryu, S. K., "Adsorption/Desorption Behavior of Residual Chlorine from Aqueous Solution by Activated Carbon Fiber Cartridge Filter," Korean Chem. Eng. Res., 38(2), 199-203(2000).
  10. Chung, S. C., Ahn, B. G. and Im, S. S., "Effect of Melt-blown Processing Conditions on the Filtration Characteristics of Polypropylene (PP) Cartridge Filter," Appl. Chem. Eng., 13(6), 613-618 (2002).
  11. Han, J. H., Lee, D. J., Lim, H. M., Lee, S. H. and Oh, S. G., "Effect of Processing Factors on the Properties of Melt-blown PP/Ba-ferrite Composite Fabrics," J. Korean Ind. Eng. Chem., 17(3), 267-273(2006).
  12. Shim, H. J., Kang, J. Y., Jang, S. H. and Oh, T. H., "Effect of Electrostatic Treatments on the Filtration Efficiency of Melt-blown Nonwovens," Tex. Sci. Eng., 45(2), 57-63(2008).
  13. Lee, C. H., Lee, J. H., Kwon, E. H., Lee, K. J., Son, E. J. and Kim, S. H., "Performance of a Plat-Type Enthalpy Exchanger Made of Melt Blown Nonwovens (II) -Characteristics of Polypropylene and Nylon Melt Blown Nonwovens," Tex. Sci. Eng., 47(6), 371-377 (2010).
  14. Latifatu M., Ko, J. M., Lee, Y. G., Kim, K. M., Jo, J. D., Jang, Y. S., Yoo, J. J. and Kim, J. H., "Electrochemical Properties of Activated Carbon Supecapacitor Containing Poly(acrylonitrile) Nonwoven Separator Coated by a Hydrogel Polymer Electrolyte," Korean Chem. Eng. Res., 51(5), 550-555(2013). https://doi.org/10.9713/kcer.2013.51.5.550
  15. Chu, K. H., Park, M. R., Kim, H. Y., Jin, F. L. and Park, S. J., "Preparation and Characterization of Polypropylene Non-woven Fabrics Prepared by Melt-blown Spinning for Filtration Membranes," BKCS, 35(6), 1901-1903(2014).
  16. Kim, C. H., Choi, S. J., Lee, H. S. and Kim, H. S., "Study of the Olefin Adhesion Layer Produced by Melt-blowing LDPE," Tex. Sci. Eng., 53(2), 68-74(2016). https://doi.org/10.12772/TSE.2016.53.068