DOI QR코드

DOI QR Code

시트 하이트 모터 기어의 각도별 내구성에 관한 연구

A Study on Durability of Seat Height Motor Gear by Angle

  • 한문식 (계명대학교 기계자동차공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Han, Moonsik (Department of Mechanical and Automotive Engineering, Keimyung UNIV.) ;
  • Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
  • 투고 : 2019.05.25
  • 심사 : 2019.06.07
  • 발행 : 2019.08.31

초록

In this study, structural and fatigue analyses of the motor gears that control the height of car seat were carried out at angles of $10^{\circ}$, $20^{\circ}$, and $30^{\circ}$. The study aims at examining which angle of the gear is superior in terms of effect on strength. In the structural and fatigue analyses, the force of 3136 N was applied to the gears, and the stress and deformation were obtained. As the analysis results, model B ($30^{\circ}$) is suggested to have the best strength and fatigue durability among the three models.

키워드

참고문헌

  1. Yoo, B. S., Koo, S. W. and Joh, J. S., “A Study on Suppression of Vibration Caused by Quick-stop Operation of Hydraulic Excavator Boom,” Journal of the Korean Society for Precision Engineering, Vol. 27, No. 12, pp. 33-40, 2010.
  2. Lee, J. I., “The Convergence Design for Stiffness and Structure Advancement of Automotive Body,” Journal of the Korea Convergence Society, Vol. 8, No. 4, pp. 189-197, 2017. https://doi.org/10.15207/JKCS.2017.8.4.189
  3. Cho, J. U. and Han, M. S., "A Study on Durability of Under Bar at Car through Structural and Fatigue Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 44-50, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.044
  4. Lee, Y. S., Ok, J. K., Kim, H. J. and Yoo, W. S., “Analytical Investigation on the Track Separation Mechanism for Tracked Excavator,” Transactions of the Korean Society of Automotive Engineers, Vol. 14, No. 6, pp. 66-72, 2006.
  5. Kang, H. J., Kim, B. H., Kim, H. J. and Seo, J. H., “Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 58-65, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.058
  6. Cho, J. U., Min, B. S. and Han, M. S., “Basic Study on Impact Analysis of Automobile,” J ournal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 1, pp. 64-70, 2009.
  7. Lee, J. I., A Study on the Design of Blimp Type Rotor Craft Blade according to Pitch Angle, Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 5, pp. 606-611, 2018. https://doi.org/10.17958/ksmt.20.5.201810.606
  8. Wang, Z. H., Byun, S. J. and Kwon, Y. C., "Fatigue and Vibration Analysis of Table according to Applied Loads, Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 5, pp. 568-573, 2018. https://doi.org/10.17958/ksmt.20.5.201810.568
  9. Wang, Z. H. and Kwon, Y. C., "Structural Analysis of Center Pillar according to Applied Load, Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 4, pp. 401-406, 2018. https://doi.org/10.17958/ksmt.20.4.201808.401
  10. Lee, B. H., Lee, C. R., Jeong, Y. J. and Kim, B. H., "A Study on the Structural Analysis of Electric Vehicle Rotor Shaft for Light-Weight, Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 2, pp. 154-159, 2018. https://doi.org/10.17958/ksmt.20.2.201804.154
  11. Lee, J. I., The Suggestion of Finite Element Modeling Method for Structural Design of Automotive Body, Journal of the Korean Society of Mechanical Technology, Vol. 21, No. 2, pp. 311-320, 2019. https://doi.org/10.17958/ksmt.21.2.201904.311
  12. Moon, S. G., Park, Y. J. and Lee, G. H., “Determination of Equivalent Moment of Inertia of Flywheel for Inertial Endurance Test of Excavator Slewing System,” Journal of the Korean Society for Precision Engineering, Vol. 34, No. 6, pp. 383-390, 2017. https://doi.org/10.7736/KSPE.2017.34.6.383
  13. Cho, J. U. and Han, M. S., “Structural Safety Analysis of Car Body,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 7, No. 3, pp. 12-16, 2008.
  14. Cho, J. U. and Han, M. S., “Durability Study on Structural Strength due to the Shape of Excavator Wheel,” Transactions of the Korean Society of Automotive Engineers, Vol. 21, No. 6, pp. 166-174, 2013. https://doi.org/10.7467/KSAE.2013.21.6.166
  15. Ryu, J. M., Park, K. C. and Kang, T. W., "A Study on the Structural Design for Safety Improvement of the Winch Mount of an Armored Recovery Vehicle," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 58-62, 2017. https://doi.org/10.14775/ksmpe.2016.16.1.058