References
- Lange, K., Handbook of Metal Forming, Mc Graw-Hill Book Company, New York, pp. 13.6-13.7, 1985.
- Altan, T., Oh, S. I., Gegel, H., Metal Forming: Fundamentals and Applications, ASM, Metals Park, pp. 25, 1983.
- Lee, Y. S., Yang, Y. J., “An Envaluation of Structural Stability on Mold Frame of Drawing Process System of SUS Hexagonal Bar,” Journal of Korean Society of Mechanical Technology, Vol. 20, No. 3, pp. 279-286, 2018. https://doi.org/10.17958/ksmt.20.3.201806.279
- Lee, Y. S., Yang, Y. J., “Structural Analysis on Clamp Guide Bar of Drawing Process System for SUS Hexagonal Bar,” Journal of Korean Society of Mechanical Technology, Vol. 20, No. 6, pp. 703-808, 2018.
- Atienza, J. M., Martinez-Perez, M. L., Ruiz-Hervias, J., Mompean, F. J., Garcia-Hernandez, M., Elices, M., "Residual Stresses in Cold Drawn Ferrite Rods," Scripta Materialia, Vol. 52, No. 2, pp. 305-309, 2005. https://doi.org/10.1016/j.scriptamat.2004.10.010
- Elices, M., Ruiz, J., Atienza, J. M., “Influence of Residual Stresses on Hydrogen Embrittlement of Cold Drawn Wires,” Materials and Structures, Vol. 37, No. 5, pp. 305-310, 2004. https://doi.org/10.1007/BF02481676
- Lee, S. K., Kim, D. W., Jeong, M. S., Kim, B. M., "Evaluation of Axial Surface Residual Stress in 0.82wt% Carbon Steel Wire During Multi-pass Drawing Process Considering Heat Generation," Materials and Design, Vol. 34, pp. 363-371, 2012. https://doi.org/10.1016/j.matdes.2011.06.036
- Lee, S. B., Lee, I. K., Jeong, M. S., Kim, B. M. Lee, S. K, “Prediction of Surface Residual Stress of Multi-pass Drawn Steel Wire Using Numerical Analysis,” Transactions of Materials Processing, Vol. 26, No. 3, pp. 162-167, 2017. https://doi.org/10.5228/KSTP.2017.26.3.162
- Kim, S. J., Kim, J. H., "Analysis of the Effect of Tension on the Deformation of Wire Cross - Section During Reed Wire Rolling," Journal of Korean Society of Mechanical Technology, Vol. 20, No.4, pp. 479-484, 2018. https://doi.org/10.17958/ksmt.20.4.201808.479
- Lee, S. K., Kim, B. M., “A Study on the Fine Wire Drawing Process Design to Improve the Productivity,” Transactions of Materials Processing, Vol. 17, No. 4, pp. 257-267, 2008. https://doi.org/10.5228/KSPP.2008.17.4.257
- Lee, S. K, Lee, S. B., Kim, B. M., "Process Design of Multi-stage Wet Wire Drawing for Improving the Drawing Speed for 0.72 wt% C Steel Wire," Journal of Materials Processing Technology, Vol. 210, pp. 776-783, 2010. https://doi.org/10.1016/j.jmatprotec.2010.01.007
- Vega, G., Haddi, A., Imad, A., "Temperature Effects on Wire-drawing Process: Experimental Investigation," International Journal of Material Forming, Vol. 2, pp. 229-232, 2009. https://doi.org/10.1007/s12289-009-0468-y
- Cetlin, P. R., "Redundant Deformation Factor Evaluation Through the Hardness Profile Method in Round Section Bar Drawing," Journal of Engineering Materials and Technology, Vol. 106, pp. 147-151, 1984. https://doi.org/10.1115/1.3225689
- Chen, D. C., Guo, Z. Y., Wang, S. J., "Finite Element Analysis of Double Layers Alloy Wire Drawing Processes," International Journal of Material Forming, Vol. 1, pp. 415-418, 2008. https://doi.org/10.1007/s12289-008-0083-3
- Lee, I. K., Lee, S. Y., Kim, D. H., Lee, J. W., Lee, S. K., "Wire Drawing Process Design for Fine Rhodium Wire," Transactions of Materials Processing, Vol. 27, No. 4, pp. 244-249, 2018. https://doi.org/10.5228/KSTP.2018.27.4.244
- Hosford, W. F., Caddell, R. M., Metal Forming: Mechanics and Metallurgy, Cambridge University Press, Cambridge, pp. 110, 2007.
- Avitzur, B., Metal Forming: Processes and Analysis, McGraw-Hill Book Company, New York, pp. 155-157, 1968.
- Venet, G., Balan, T., Baudouin, C., Bigot, R., "Direct Usage of the Wire Drawing Process for Large Strain Parameter Indentification," International Journal of Material Forming, Vol. 11, pp. 1-14, 2018.Part B: Journal of Engineering Manufacture, Vol. 11, pp. 365-373, 2002. https://doi.org/10.1007/s12289-016-1336-1
- Jo, H. H., Lee, S. K., Kim, M. A., Kim, B. M., "Pass Schedule Design System in the Dry Wire-drawing Process of High Carbon Steel," Procedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 216, pp. 365-373, 2002. https://doi.org/10.1243/0954405021520030