한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제18권9호
  • /
  • Pages.58-63
  • /
  • 2019
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

SCM415강의 원형포켓 가공시 치수정밀도에 관한 연구

A Study on Dimensional Accuracy in Circular Pocket Machining of SCM415 Steel

  • 신미정 (한국폴리텍대학 컴퓨터응용기계과) ;
  • 최철웅 (대명하이텍)
  • 투고 : 2019.05.10
  • 심사 : 2019.06.07
  • 발행 : 2019.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this research, we examine the change of dimensional accuracy in the cutting process while changing cutting conditions such as feed rate and spindle rotational speed with chromium molybdenum steel (SCM415) material and TiCN- and TiAlN-coated end mill tools. According to dimensional accuracy measurement, TiCN-coated tool displays the most accurate dimensional tolerance at ${\varnothing}20mm$ at feed rates of 200 mm/min and 250 mm/min at a spindle rotation speed of 4,000 rpm. The largest dimension of the coating tool was able to make the TiAlN-coated tool suitable when comparing the smallest dimension.

키워드

참고문헌

  1. Yang, Y. M., "A Study on Characteristics of Dimensional Accuracy using Planning Number of Machining in Machining Center", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 6, pp. 61-67, 2018. https://doi.org/10.14775/ksmpe.2018.17.6.061
  2. Yoon, J. H., Lee, J. W. and Jung, K. Y., Jung, M. S., "Cutting Condition for Improving Cutting Efficiency and Accuracy by Ball Endmill on a Machining Center", Journal of the Korea Society of Machine Tool Engineers, Vol. 7, No. 3, pp. 99-103, 1998.
  3. Park, J. N., Cho, G. J. and Lee, S. C., "A Study on the Cutting Characteristics of Ti-6Al-4V Alloy in Turning Operation", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 3, No. 4, pp. 81-87, 2004.
  4. Seong, C. H., Kim, H. C. and Kim, K. S., "Characteristics of Surface Roughness in the High Speed Micro Turning of Aluminum Alloy", Journal of the Korean Society of Precision Engineering, Vol. 16, No. 7, pp. 94-100, 1999.
  5. Jun, J. U., Chung, J. S. and Ha, M. K., "Analysis of Cutting Specific in Non-ferrous Metal by Changed rake-angle and feed-rate adjustment at Turning", Journal of the Korea Society of Machine Tool Engineering, pp. 32-37, 2001.
  6. Choi, J. G., Kim, H. S. and Kim, S. C., "A Study on the Optimum Finish Allowance for Machining Accuracy Improvement in the End Milling Processes", Journal of the Korea Society of Machine Tool Engineering, Vol. 13, No. 3, pp. 8-14, 2004.
  7. Yoon, J. H., Cheong, M. S. and Lee, H. C., "A Study on Transition of Dimension Error and Surface Precision in High Speed Machining of AI-alloy", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 9, No. 3, pp. 96-102, 2000.
  8. Yoon, J. H., Seo, S. W. and Lee, H. C., "A Study on the Effect of Dimensional Errors and Roundness in High Speed Cylindrical Machining of Al-alloy", Journal of the Korea Society of Machine Tool Engineering, Vol. 10, No. 5, pp. 17-27, 2000.
  9. Kim, J. S., Kang, S. K., and Lee, D. S., "A Study on the Machining Characteristics of Prototype of Roller Gear Cams", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 5, pp. 60-70, 2012.
  10. Kim, J. S., Kim, Y. J., "A Study on Cutting Performance of a Developed Small Angle Spindle Tool", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 2, pp. 111-117, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.111
  11. Shin, M. J., "A Study on the Machined Characteristics of SCM415 Still Cutting", A Thesis for a Master, Kyungnam University, Republic of Korea, 2011.
  12. Ahn, K. W., Jeon, E. C., and Kim, T. H., "Turning Machining Optimization using Software Based on Cutting Force Model", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 5, pp. 107-112, 2015. https://doi.org/10.14775/ksmpe.2015.14.5.107
  13. Kim, M. Y., Li, C. P., and Kim, J. H., Ko, T. J., "Machining Characteristics of the Hybrid Machining System Comprising of EDM and Endmilling", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 86-92, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.086
  14. Choi, C. W., "A Study on the Characteristics of Circular Pocket Machining for SCM415 steel", A Thesis for a Master, Kyeongsang National University, Republic of Korea, 2017.