DOI QR코드

DOI QR Code

A Study on Three-Phase Separation Efficiency according to the Diffusion Plate of a High-Speed Centrifugal Separator

고속 원심분리장치의 확산판에 따른 상 분리효율에 관한 연구

  • Lee, Choon-Man (Dept. of Mechanical Engineering, College of Mechatronics, Changwon National University) ;
  • Jeong, Ho-In (Mechanical Design and Manufacturing, School of Mechatronics Engineering, Changwon National University)
  • 이춘만 (창원대학교 기계공학부) ;
  • 정호인 (창원대학교 메카트로닉스공학부)
  • Received : 2019.09.06
  • Accepted : 2019.09.27
  • Published : 2019.10.30

Abstract

Recently, as the high-precision machinery industry has developed rapidly, peripheral equipment has been developed to improve machining efficiency. Peripheral equipment for machining includes cooling units, housings, oil separators, and much more. Oil, such as cleaning and cutting fluids, is used for machining. When waste oil is reused, the contamination of the workpieces and reduction in machining accuracy are generated by the waste oil, including sludge. Therefore, the development of an oil separator is necessary for efficiently separating oil, water, and sludge. The purpose of this study is to analyze the oil separation efficiency and flow characteristics of a high-speed centrifugal separator according to the rotation velocity and diffusion plate. The oil separation efficiency and flow characteristics were analyzed using hydrodynamic theory and computational fluid dynamics (CFD). The results of this study will be used as basic data for the development of a high-speed centrifugal separator.

Keywords

References

  1. Kilicay, K. and Ulutan, M., "Investigation of the Solid Lubrication Effect of Commercial Boron-Based Compounds in End Milling," International Journal of Precision Engineering and Manufacturing, Vol. 17, No. 4, pp. 517-524, 2016. https://doi.org/10.1007/s12541-016-0065-1
  2. Yoon, H. S., Kim, M. S., Jang, K. H., and Ahn, S. H., "Future Perspectives of Sustainable Manufacturing and Applications Based on Research Databases," International Journal of Precision Engineering and Manufacturing, Vol. 17, No. 9, pp. 1249-1263, 2016. https://doi.org/10.1007/s12541-016-0150-5
  3. Nam, S. H., Lee, D. K., Jeong, Y. K., Lee, P., and Shin, J. G., "Environmental Impact Assessment of Composite Small Craft Manufacturing Using the Generic Work Breakdown Structure," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 3, pp. 261-272, 2016. https://doi.org/10.1007/s40684-016-0034-2
  4. Kang, S. M., "Bioinspired Design and Fabrication of Green-Environmental Dry Adhesive with Robust Wide-Tip Shape," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 2, pp. 189-192, 2016. https://doi.org/10.1007/s40684-016-0025-3
  5. Bensadok, K., Belkacem, M., Nezzal, G., "Treatment of cutting oil/water emulsion by coupling coagulation and dissolved air flotation," Desalination, Vol 206, pp. 400-448, 2007.
  6. Feng, W., Yin, Y., Mendoza, M. D. L., Wang, L., Chen, X., et al., "Freeze-Thaw Method for Oil Recovery from Waste Cutting Fluid without Chemical Additions," Journal of Cleaner Production, Vol. 148, pp. 84-89, 2017. https://doi.org/10.1016/j.jclepro.2017.01.156
  7. Kobya, M., Ciftci, C., Bayramoglu, M., and Sensoy, M. T., "Study on the Treatment of Waste Metal Cutting Fluids Using Electrocoagulation," Separation and Purification Technology, Vol. 60, No. 3, pp. 285-291, 2008. https://doi.org/10.1016/j.seppur.2007.09.003
  8. Lee, C. M., Choi, Y. H., Ha, J. H. and Woo, W. S., "Eco-Friendly Technology for Recycling of Cutting Fluids and Metal Chips: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 4, No. 4, pp. 457-468, 2017. https://doi.org/10.1007/s40684-017-0051-9
  9. Yamamoto, T., Kageyama, T., Yoshida, H., and Fukui, K., "Effect of new blade of centrifugal separator on particle separation performance," Separation and Purification Technology, Vol. 162, pp. 120-126, 2016. https://doi.org/10.1016/j.seppur.2016.02.004
  10. Cambiella, A., Benito, J. M., Pazos, C., and Coca, J., "Centrifugal Separation Efficiency in the Treatment of Waste Emulsified Oils," Chemical Engineering Research and Design, Vol. 84, No. 1, pp. 69-76, 2006. https://doi.org/10.1205/cherd.05130
  11. Lee, J. Y. and Han, W. H., "An effect of laminated plate on the performance of pre-separator for marine oily water separator," Journal of the Korean Society of Tribologists and Lubrication Engineers, Vol. 16, No. 6, pp. 440-447, 2000.
  12. Batalovic, V., "Centrifugal separator, the new technical solution, application in mineral processing," International Journal of Mineral Processing, Vol. 100, 86-95, 2011. https://doi.org/10.1016/j.minpro.2011.05.007
  13. Le, T. T., Ngo, S. I., Lim, Y. I., Park. C. K., Lee, B. D., Kim, B. G. and Lim, D. H., "Three-Phase Eulerian Computational Fluid Dynamics (CFD) of Air-Water-Oil Separator with Coalescer," Journal of Petroleum Science and Engineering, Vol. 171, pp. 731-747, 2018. https://doi.org/10.1016/j.petrol.2018.08.001
  14. Kim, B. J., Kim, Y. S., Roh, C. S. and Lee, Y. H., "A Study on the Flow Characteristics of Oil-Water Separator for Marine Ship CFD," Journal of the Korean Society for Fluid machinery, Vol. 19, No. 4, pp. 48-53, 2016.