Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

The Optimal Design of Wear Pads for the Final Reduction Drive in Tactical Vehicles

전술차량용 종감속기 마모패드 최적설계에 관한 연구

  • Received : 2019.08.03
  • Accepted : 2019.08.26
  • Published : 2019.10.30
Download PDF
⟨ Previous Next ⟩

Abstract

The final reduction drive in tactical vehicles has a wear-pad that helps to maintain adequate end floating when the hub assay operates. The input axis and sun gear move repeatedly with the axis when tactical vehicle is operating. The hub assay is designed so that the wear pads won't seize during operation. Seizure of the wear pads during operation results in oil leakage. In our study, the fault mechanism was analyzed to prevent the seizure of the wear pads and an optimal design for the shape and material of the wear-pad was explored. We then observed the changes in temperature, shape, and material of several important parts.

Keywords

References

  1. Cho, K. H., "A Study on the Development Method of the Domestic New Generation Multiple Launcher Rocket System", Journal of the Korea Institute of Military Science and Technology, Vol. 11, No. 6, pp.21-29, 2008.
  2. Lee, B., Son, J., Jung, D. and Kim, K., "Study on the development of military vehicles for future warfare", Korean Society of Automotive Engineers 2012 Annual Conference, pp.2623-2626, 2012.
  3. Shin, H., Lee, Y. J., Shim J., Lee, H. J., Kim S. K. and Heo, Y., "Research of Temperature Characteristics of Final Reduction Drive for Tactical Vehicle", Korea Institute of Military Science and Technology Annual Conference Proceedings, pp.1949-1950, 2018.
  4. Lee, H. J. and Kim, J. S., "A Study on the Failure of the Final Reduction Gear Pad Bolt in the Tactical Vehicle", Journal of the Korean Society of Mechanical Technology, Vol. 18, Issue 2, pp.281-287, 2016. https://doi.org/10.17958/ksmt.18.2.201604.281
  5. Shin, M. and Sim, J., "Analysis of Tire Wear on Wheeled Vehicles", Korean Society of Automotive Engineers Annual Autumn Conference and Exhibition, pp.2656-2662, 2012.
  6. Lim, H. K., Kim, J. H. and Lee, J. Y., "Configuration of Independent Axle for Wheeled Armored Vehicle to Retain Operational Mobility". Journal of the Korean Association of Defense Industry Studies, Vol 19, No. 1, pp.168-180, 2012.
  7. Jo, Y. J., Jeon, E. C. and Kang, J. H., "A Study on the Optimum Design of Independent Suspension Final Reduction Gear", Journal of the Korean Society of Manufacturing Process Engineers, Vol 7, No. 4, pp. 135-141, 2008.
  8. Lee, J. H, Kwon, H. J. and Kang, J. H., "A study on structure analysis and material improvement lightweight of special-purpose vehicles axle", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 4, pp.136-142, 2009.
  9. Jang, J. Y., Shin J. R., Park, S. T., Yum, Y. J., Yang S. Y., Son, J. H. and Joung C. S., "A Development of Independent Suspension Axle System for Special Purpose Vehicle", Korean Society of Automotive Engineers 2008 Fall Conference in Busan Ulsan Kyungnam Division, pp.86-93, 2008.
  10. Lee, D. H. and Sun, K. H, "Thermohydrodynamic Analysis and Pad Temperature Measurement of a Tilting Pad Journal Bearing for a Turbine Simulator", Journal of The Korean Society of Tribologists and Lubrication Engineers, Vol. 33, No. 3, pp.112-118, 2017. https://doi.org/10.9725/kstle.2017.33.3.112
  11. Lee, D., Sun, K., Kim, B. and Kang, D., "Thermohydrodynamic Analysis and Pad Temperature Measurement of Tilting Pad Journal Bearing with Worn Pad", Journal of The Korean Society of Tribologists and Lubrication Engineers, pp.134-140, 2017.
  12. Lee, D., Kim B. and Lim H., "Thermal Analysis and Temperature Measurement of Tilting Pad Bearings Supporting a Power Turbine for the Supercritical CO2 Cycle Application", Journal of The Korean Society of Tribologists and Lubrication Engineers, Vol 34, No. 2, pp.43-48, 2018.
  13. Lee, D. G., Zhen, Q., Kim, L. S., and Lyu, S. K., "A Study on Optimum Design of Worm Gear Reducer Output Pinion", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp.153-158, 2017. https://doi.org/10.14775/ksmpe.2017.16.6.153
  14. Kim T. H., Jang J. H., Lee D. G., Kim L. S., and Lyu S. K., "Study on Optimal Design and Analysis of Worm Gear Reducer for High Place Operation Car", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp.98-103, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.098