한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

자전거 핸들의 강도 해석에 의한 내구성 연구

Durability Study by Strength Analysis of Bicycle Handle

  • 한문식 (계명대학교 기계자동차공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Han, Moonsik (Department of Mechanical and Automotive Engineering, Keimyung UNIV.) ;
  • Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
  • 투고 : 2019.08.15
  • 심사 : 2019.08.28
  • 발행 : 2019.10.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Most of people are riding on their own bicycle due to the health and environmental pollution problems. The weight must be light in order to run farther and easier by bicycle. The durability will be reduced due to the light weight of tubes and handles at bicycle. To solve this problem, the three bicycle handle models 1, 2 and 3 were compared with each other for structural analysis. The structural analysis was carried out in this study. Among three models, model 2 and model 3 had the highest and lowest strengths at the structural analysis results, respectively. At this study result, model 1 is thought to be the balanced excellent model with no defect among three models.

키워드

참고문헌

  1. Kweon, B. S., Lee, C. W. and Shin, Y. I., “A Study on the Vibration Analysis of Impeller and Shaft in Cryogenic Submerged Pump,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 2, pp. 56-62, 2017. https://doi.org/10.14775/ksmpe.2016.16.2.056
  2. Yang, Y. S. and Bae, K. Y., “Stress Analysis of Pipe Connection Process Using Clamping Ring,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 2, pp. 81-87, 2017. https://doi.org/10.14775/ksmpe.2017.16.2.081
  3. Choi, G. G. and Cho, J. U., “A Convergence Study through Durability Analysis due to the Configuration of Automotive Frame Butted,” Journal of the Korea Convergence Society, Vol. 9, No. 11, pp. 271-276, 2018. https://doi.org/10.15207/JKCS.2018.9.11.271
  4. Lee, J. H. and Cho, J. U., “Study on Convergence Technique due to the Shape of Cruiser Board through Structural Analysis,” Journal of the Korea Convergence Society, Vol. 6, No. 4, pp. 99-105, 2015. https://doi.org/10.15207/JKCS.2015.6.4.099
  5. Wang, Z. H. and Kwon, Y. C., “Structural Analysis according to Load of Height-adjustable Table,” Journal of Korean Society of Mechanical Technology, Vol. 20, No. 3, pp. 273-278, 2018. https://doi.org/10.17958/ksmt.20.3.201806.273
  6. Lee, B. H., Lee, C. R., Jeong, Y. J. and Kim, B. H., “A Study on the Structural Analysis of Electric Vehicle Rotor Shaft for Light-Weight,” Journal of Korean Society of Mechanical Technology, Vol. 20, No. 2, pp. 154-159, 2018. https://doi.org/10.17958/ksmt.20.2.201804.154
  7. Oh, Y. T., “Study on the Structural Analysis of SCARA Industrial Robot,” Journal of Korean Society of Mechanical Technology, Vol. 19, No. 6, pp. 866-871, 2017. https://doi.org/10.17958/ksmt.19.6.201712.866
  8. Jung, Y. S., Gao, J. C., Kim, J. Y. and You, G. J., “A Study on the Structural Analysis of Fiber Guide accept to 4C MM Optical Fiber,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 75-80, 2017. https://doi.org/10.14775/ksmpe.2017.16.6.075
  9. Han, M. S. and Cho, J. U., “Structural and Fatigue Analysis on Shock Absorber Mount of Automobile,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 125-133, 2012.
  10. Han, M. S. and Jo, J. W., “A Study on Durability of Under Bar at Car through Structural and Fatigue Analysis,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 44-50, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.044
  11. Ko, J. H. and Kang, D. M., “CAE Analysis on Strength and Fatigue of Rear Door of Passenger Car,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 3, pp. 63-69, 2014. https://doi.org/10.14775/ksmpe.2014.13.3.063
  12. Cho, J. U. and Han, M. S., “Structural Analysis on Tension Bearing of Automotive Engine,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 5, pp. 21-28, 2012.
  13. Ha, S. H., Kim, S. J. and Song, J. I., “Structure Analysis and Torque Reduction Design of Industrial Ball Valve,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 6, pp. 37-45, 2014. https://doi.org/10.14775/ksmpe.2014.13.6.037