DOI QR코드

DOI QR Code

Effect of diameter of MWCNT reinforcements on the mechanical properties of cement composites

  • 투고 : 2019.06.06
  • 심사 : 2019.07.31
  • 발행 : 2019.11.25

초록

Application of nanotechnology can be used to tailor made cementitious composites owing to small dimension and physical behaviour of resulting hydration products. Because of high aspect ratio and extremely high strength, carbon nanotubes (CNTs) are perfect reinforcing materials. Hence, there is a great prospect to use CNTs in developing new generation cementitious materials. In the present paper, a parametric study has been conducted on cementitious composites reinforced by two types of multi walled carbon nanotubes (MWCNTs) designated as Type I CNT (10-20 nm outer dia.) and Type II CNT (30-50 nm outer dia.) with various concentrations ranging from 0.1% to 0.5% by weight of cement. To evaluate important properties such as flexural strength, strain to failure, elastic modulus and modulus of toughness of the CNT admixed specimens at different curing periods, flexural bending tests were performed. Results show that composites with Type II CNTs gave more strength as compared to Type I CNTs. The highest increase in strength (flexural and compressive) is of the order of 22% and 33%, respectively, compared to control samples. Modulus of toughness at 28 days showed highest improvement of 265% for Type II 0.3% CNT composites. It is obvious that an optimum percentage of CNT could exists for composites to achieve suitable reinforcement behaviour and desired strength properties. Based on the parametric study, a tentative optimum CNT concentration (0.3% by weight of cement) has been proposed. Scanning electron microscope image shows perfect crack bridging mechanism; several of the CNTs were shown to act as crack arrestors across fine cracks along with some CNTs breakage.

키워드

참고문헌

  1. Aiu, M. (2006), "The chemistry and physics of nano-cement", Strain, 28.
  2. Al-rub, R.K.A., Ahmad, I.A. and Bryan, M.T. (2012), "On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites", Constr. Build. Mater., 35, 647-655. https://doi.org/10.1016/j.conbuildmat.2012.04.086
  3. Archontas, N.D. and Pantazopoulou, S.J. (2015), "Microstructural behavior and mechanics of nano-modified cementitious materials", Adv. Concrete Constr., 3(1), 15-37. https://doi.org/10.12989/acc.2015.3.1.015
  4. Brock, M., Rodney, A. and David, P. (2007), "Multiwall carbon nanotubes enhance the fatigue performance of physiologically maintained methyl methacrylate-styrene copolymer", Carbon, 45(10), 2098-2104. https://doi.org/10.1016/j.carbon.2007.05.013
  5. Hallad, S.A., Nagaraj, R.B., Anand, M.H., Ashok, S.S., Narasimha, H.A., Mruthunjaya, A.K. Lohit, R.B. and Manjunath, U. (2017), "Experimental investigation for graphene and carbon fibre in polymer-based matrix for structural applications", J. Appl. Res. Technol., 15(3), 297-302. https://doi.org/10.1016/j.jart.2017.01.014
  6. Jean-Paul Salvetat-Delmotte, Angel Rubio (2002), Salvetat, 40. http://www.sciencedirect.com/science/article/pii/S000862230200012X.
  7. Khater, H.M.M. and Hamdy, A.A.G. (2015), "Characterization of alkali activated geopolymer mortar doped with MWCNT", Epitoanyag-J. Silicate Bas. Compos. Mater., 67(2), 38-47. https://doi.org/10.14382/epitoanyag-jsbcm.2015.7
  8. Konsta-Gdoutos, M.S., Zoi, S.M. and Surendra, P.S. (2010), "Highly dispersed carbon nanotube reinforced cement based materials", Cement Concrete Res., 40(7), 1052-59. https://doi.org/10.1016/j.cemconres.2010.02.015
  9. Manzur, T. and Yazdani, N. (2010), "Strength enhancement of cement mortar with carbon nanotubes", Tran. Res. Record: J. Tran. Res. Board, 2142(1), 102-108. https://doi.org/10.3141/2142-15
  10. Manzur, T. and Yazdani, N. (2015), "Optimum mix ratio for carbon nanotubes in cement mortar", KSCE J. Civil Eng., 19(5), 1405-1412. https://doi.org/10.1007/s12205-014-0721-x
  11. Manzur, T. and Yazdani, N. (2016), "Effect of different parameters on properties of multiwalled carbon nanotube-reinforced cement composites", Arab. J. Sci. Eng., 41(12), 4835-4845. https://doi.org/10.1007/s13369-016-2181-8
  12. Manzur, T., Yazdani, N. and Emon, A.B. (2014), "Effect of carbon nanotube size on compressive strengths of nanotube reinforced cementitious composites", J. Mater., 2014, 1-8. https://doi.org/10.1155/2014/960984
  13. Mohsen, M.O., Taha, R., Taqa, A.A. and Shaat, A. (2017), "Optimum carbon nanotubes' content for improving flexural and compressive strength of cement paste", Constr. Build. Mater., 150, 395-403. https://doi.org/10.1016/j.conbuildmat.2017.06.020
  14. Paul, S.C., van Rooyen, A.S., van Zijl, G.P. and Petrik, L.F. (2018), "Properties of cement-based composites using nanoparticles: A comprehensive review", Constr. Build. Mater., 189, 1019-1034. https://doi.org/10.1016/j.conbuildmat.2018.09.062
  15. Rashad, A.M. (2017), "Effect of carbon nanotubes (CNTs) on the properties of traditional cementitious materials", Constr. Build. Mater., 153, 81-101. https://doi.org/10.1016/j.conbuildmat.2017.07.089
  16. Shi, T., Zexin L., Guo, J. Gong, H. and Gu, C. (2019), "Research progress on CNTs/CNFs-modified cement-based composites - a review", Constr. Build. Mater., 202, 290-307. https://doi.org/10.1016/j.conbuildmat.2019.01.024
  17. Tyson, B.M., Al-Rub, R.K.A., Yazdanbakhsh, A. and Grasley, Z. (2011), "Carbon nanotubes and carbon nanofibers for enhancing the mechanical properties of nanocomposite cementitious materials", J. Mater. Civil Eng., 23(7), 1028-1035. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000266
  18. Wang, J., Fang, Z., Gu, A., Xu, L. and Liu, F. (2006), "Effect of amino-functionalization of multi-walled carbon nanotubes on the dispersion with epoxy resin matrix", J. Appl. Polym. Sci., 100(1), 97-104. https://doi.org/10.1002/app.22647
  19. Yazdani, N. and Mohanam, V. (2014), "Carbon nano-tube and nano-fiber in cement mortar: effect of dosage rate and water-cement ratio", Int. J. Mater. Sci., 4(2), 45-52. https://doi.org/10.14355/ijmsci.2014.0402.01

피인용 문헌

  1. Analysis of post-buckling of higher-order graphene oxide reinforced concrete plates with geometrical imperfection vol.9, pp.4, 2019, https://doi.org/10.12989/acc.2020.9.4.397