참고문헌
- M'Saoubi, R., Axinte, D., Soo, S. L., Nobel, C., Attia, H., et al., "High Performance Cutting of Advanced Aerospace Alloys and Composite Materials", CIRP Annals-Manufacturing Technology, Vol. 64, No. 2, pp. 557-580, 2015. https://doi.org/10.1016/j.cirp.2015.05.002
- Veiga, C., Davim, J., and Loureiro, A., "Properties and Applications of Titanium Alloys: A Brief Review", Journal Reviews on Advanced Materials Science, Vol. 32, No. 2, pp. 133-148, 2012.
- Technological and Sustainability Implications of Dry, Near-Dry, and Wet Turning of Ti-6Al-4V Alloy
- Klocke, F., Kramer, K., Sangermann, H., and Lung, D., "Thermo-Mechanical Tool Load during High Performance Cutting of Hard-to-Cut Materials", Procedia CIRP, Vol. 1, pp. 295-300, 2012. https://doi.org/10.1016/j.procir.2012.04.053
- Effects of the cutting edge microgeometry on tool wear and its thermo-mechanical load, B. Denkena, A. Lucas, E. Bassett CIRP, 60, S. pp. 73-76, 2011.
- Gerez, J.M.; Sanchez-Carrilero, M.; Salguero, J.; Batista, M.; Marcos, M., "A SEM and EDS based Study of the Microstructural Modifications of Turning Inserts in the Dry Machining of Ti6A14V Alloy", AIP Conf. Proc., 1181, pp. 567-574, 2009.
- Abele E, Fröhlich B., "High speed milling of titanium alloys", Adv Prod Eng Manag 2008;3:131-40.
- M. El Baradie Cutting fluids: Part I. characterisation J Mater Process Technol, 56 (1-4), pp. 786-797, 1996. https://doi.org/10.1016/0924-0136(95)01892-1
- D. U. Park, C. S. Yoon, S. K. Lee, "Critical Review on Carcinogenicity of Metalworking Fluids", Journal of the Korea Society of Precision Engineering, Vol. 20, No. 1, 2003.
- U.S. Department of Health and Human Services, "Occupational Exposure to Metalworking Fluids", NIOSH Publication, No. 98-102, 1998.
- F. Meza, L. Chen, N. Hudson, "Investigation of respiratory and dermal symptoms associated with metal working fluids at an aircraft engine manufacturing facility", Am J Ind Med, 56 (12) pp. 1394-1401, 2013. https://doi.org/10.1002/ajim.22253
- A. Shokrani, V. Dhokia, S.T. Newman "Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids", Int J Mach Tools Manuf, 57, pp. 83-101, 2012. https://doi.org/10.1016/j.ijmachtools.2012.02.002
- V. P. Astakhov., "Ecological machining: near dry machining", Mechanics of machining: FEM simulation machining, pp. 195-223, 2009.
- Pereira, O., Rodriguez, A., Fernandez-Abia, A., Barreiro, J., and De Lacalle, L. L., "Cryogenic and Minimum Quantity Lubrication for an Eco-Efficiency Turning of AISI 304", Journal of Cleaner Production, Vol. 139, pp. 440-449, 2016. https://doi.org/10.1016/j.jclepro.2016.08.030
- Qinglong An1 . Jiaqiang Dang1 Cooling Effects of Cold Mist Jet with Transient Heat Transfer on High-Speed Cutting of Titanium Alloy
- Octavio Pereira, Adrian Rodriguez, Joaquin Barreiro, Ana Isabel Fernandez-Abia, and Luis Norberto Lopez de Lacalle Nozzle Design for Combined Use of MQL and Cryogenic Gas in Machining.
- Bradshaw. P, "Effects of Streamline Curvature on Turbulent Flow", AGARDograph, AG-169; 7, 1990.
- Michele Trancossi, Subhash Maharshi, Diego Angeli "MATHEMATICAL MODELLING OF A TWO STREAMS COANDA EFFECT NOZZLE", ASME International Mechanical Engineering Congress and Exposition pp. 1-10 2013.
- D. W. Lee, "A Study on the Flow Characteristics of Air Knife in Hot-Dip Galvanizing", Master's thesis, Kyungpook National University, 14pages, 2007.
- J. G. Ahn, "Study on the Effect of Air-curtain Installed at the Entrance Door of Passenger Coach on the Blockage of Thermal Energy Transfer into the Cabin", Master's thesis, Seoul National University of Science&Technology, pp. 11-12, 2005.
- Y.T. Ge, SA Tassou, "Simulation of the performance of single jet air curtains for vertical refrigerated display cabinets", Applied Thermal Engineering 21, pp. 201-219, 2001. https://doi.org/10.1016/S1359-4311(00)00040-5