항공우주시스템공학회지 (Journal of Aerospace System Engineering)

  • 제13권5호
  • /
  • Pages.72-78
  • /
  • 2019
  • /
  • 1976-6300(pISSN)
  • /
  • 2508-7150(eISSN)
항공우주시스템공학회 (The Society for Aerospace System Engineering)
권호 표지
DOI QR코드

DOI QR Code

전투기 흡입구 해머쇼크 설계압력에 대한 확률론적 접근법

Probabilistic Approach for Fighter Inlet Hammershock Design Pressure

  • 투고 : 2019.04.17
  • 심사 : 2019.09.03
  • 발행 : 2019.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

전투기 흡입구 덕트 구조물 설계에 중요한 하중조건으로 흡입구 해머쇼크 조건이 있다. 엔진 압축기 내부유동의 갑작스런 감소에 의하여 큰 압력의 해머쇼크가 발생하게 된다. 압축충격파인 흡입구 해머쇼크 해석을 위한 전통적인 방법은 극단적인 조건들의 조합을(최대 속도, 해수면, 저온 대기) 이용하였지만, 90년대 이후 확률론적 방법을 통해 적절한 해머쇼크 설계압력을 제시한 논문들이 발표되었다. 이를 참고로 본 연구는 한국공군의 비행운용데이터를 활용하여 흡입구 해머쇼크 압력을 확률론적으로 접근하였고, 이를 통해 전통적인 방법 대비 약 30 % 감소된, 흡입구 설계용 해머쇼크 압력을 해석하였다.

Inlet hammershock is the critical loads condition for designing the inlet duct structure of a fighter. The sudden flow reduction in engine compressor causes inlet hammershock with high pressure. The traditional method was used to combine extreme conditions (maximum speed, sea level altitude, and cold day) to analyze this compression wave inlet hammershock pressure. However, after the 90s there have been papers that presented the probabilistic approach for the inlet hammershock to achieve the appropriate design pressure. This study shows how to analyze the inlet hammershock pressure by making practical use of the Republic of Korea Air Force real flight usage data under probabilistic approach and then analyze approximately 30% decreased inlet hammershock pressure compared with the traditional valve.

키워드

참고문헌

  1. A. P. Kurkov and et al., "Investigation of the Stall Hammershock at the Engine Inlet," Journal of Aircraft, vol. 12, no. 4, pp. 198-204, April 1975. https://doi.org/10.2514/3.59818
  2. W. Luber and D Parisse, "Frequency of Hammershock Exceedances of Structural Design Parameters," Mathematical Problems in Eng'g, Aerospace and Sciences, June 25-27, 2008 (Italy)
  3. L. C. Young and W. D. Beaulieu, "Review of Hammershock Pressure in Aircraft Inlets," Journal of Aircraft, vol. 12, no. 4, pp. 210-216, April 1975. https://doi.org/10.2514/3.44435
  4. P. J. Evans and P. P. Truax, "YF-16 Air Induction System Design Loads Associated with Engine Surge," Journal of Aircraft, vol. 12, no. 4, pp. 205-209, April 1975. https://doi.org/10.2514/3.44434
  5. F. Marshall, "Prediction of Inlet Duct Overpressures Resulting from Engine Surge," Journal of Aircraft, vol. 10, no. 5, pp. 274-278, April 1972. https://doi.org/10.2514/3.60226
  6. A. Ytterstrom, "Hammershock Calculations in the Air Intake of JAS 39 GRIPEN, using Duel Timestepping," pp.122-131, 1999.(AIAA-99-33364)
  7. I. O. Hindash and et al. , "Computational Modeling of Inlet Hammershock Wave Generation," AIAA/SAE/ASME/ASEE 26th Joint Propulsion Conference, July 16-18, 1990.(AIAA 90-2005)
  8. M. C. Gridley and et al. , "Impact of a Probabilistic Approach on Inlet Hammershock Design Loads," 35th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, June 1999.(AIAA 99-2114)
  9. J. W. Hamstra and B. N. McCallum, "Tactical Aircraft Aerodynamic Integration," Encyclopedia of Aerospace Engineering, John Wiley & Sons, Ltd. 2010
  10. Military Specification: Engine, Aircraft, Turbojet and Turbofan, General Specification For, Sep. 1983 (MIL-E-005007E)
  11. JMP software, www.jmp.com
  12. Department of Defense Joint Service Specification Guide, Aircraft Structures, 30 Oct 1998, JSSG-2006