DOI QR코드

DOI QR Code

The effect of wollastonite powder with pozzolan micro silica in conventional concrete containing recycled aggregate

  • Dinh-Cong, Du (Division of Construction Computation, Institute for Computational Science, Ton Duc Thang University) ;
  • Keykhosravi, Mohammad. H. (Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia) ;
  • Alyousef, Rayed (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University) ;
  • Salih, Musab N.A. (School of Civil engineering, Faculty of Engineering, Universiti Teknologi Malaysia) ;
  • Nguyen, Hoang (Institute of Research and Development, Duy Tan University) ;
  • Alabduljabbar, Hisham (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University) ;
  • Alaskar, Abdulaziz (Department of Civil Engineering, College of Engineering, King Saud University) ;
  • Alrshoudi, Fahed (Department of Civil Engineering, College of Engineering, King Saud University) ;
  • Poi-Ngian, Shek (Construction Research Center (CRC), Institute for Smart Infrastructure & Innovative Construction (ISIIC), School of Civil Engineering, Universiti Teknologi Malaysia)
  • 투고 : 2019.02.26
  • 심사 : 2019.04.25
  • 발행 : 2019.10.25

초록

Construction development and greenhouse gas emissions have globally required a strategic management to take some steps to stain and maintain the environment. Nowadays, recycled aggregates, in particular ceramic waste, have been widely used in concrete structures due to the economic and environmentally friendly solution, requiring the knowledge of recycled concrete. Also, one of the materials used as a substitute for concrete cement is wollastonite mineral to decrease carbon dioxide (CO2) from the cement production process by reducing the concrete consumption in concrete. The purpose of this study is to investigate the effect of wollastonite on the mechanical properties and durability of conventional composite concrete, containing recycled aggregates such as compressive strength, tensile strength (Brazilian test), and durability to acidic environment. On the other hand, in order to determine the strength and durability of the concrete, 5 mixing designs including different wollastonite values and recovered aggregates including constant values have been compared to the water - cement ratio (w/c) constant in all designs. The experimental results have shown that design 5 (containing 40% wollastonite) shows only 6.1% decrease in compressive strength and 4.9% decrease in tensile strength compared to the control plane. Consequently, the use of wollastonite powder to the manufacturing of conventional structural concrete containing recycled ceramic aggregates, in addition to improving some of the properties of concrete are environmentally friendly solutions, providing natural recycling of materials.

키워드

참고문헌

  1. Abedini, M., et al. (2017), "Evaluation of concrete structures reinforced with fiber reinforced polymers bars: A review", J. Asian Scientific Res., 7(5), 165. DOI: 10.18488/journal.2.2017.75.165.175.
  2. Abedini, M., Khlaghi, E.A., Mehrmashhadi, J., Mussa., M.H., Ansari, M. and Momeni, T. (2019), Large Deflection Behavior Effect in Reinforced Concrete Columns Exposed to Extreme Dynamic Loads, engrXiv: 32.
  3. Akhoundan, M.R., et al. (2018), "Practical use of computational building information modeling in repairing and maintenance of hospital building-case study", Smar Struct. Syst., 22(5), 575-586. https://doi.org/10.12989/sss.2018.22.5.575.
  4. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010), "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel & Composite Structures.
  5. Arabnejad Khanouki, M.M., et al. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2329.
  6. Arani, K.S., et al. (2019), "Computational optimized finite element modelling of mechanical interaction of concrete with fiber reinforced polymer", Comput. Concrete, 23(1), 61-68. https://doi.org/10.12989/cac.2019.23.1.061
  7. Bahadori, A. and Ghassemieh, M. (2016), "Seismic evaluation of I-shaped beam to box-column connections with top and seat plates by the component method", Sharif: Civil Eng., 32(2), 129-138.
  8. Bazzaz, M. (2018), "Experimental and analytical procedures to characterize mechanical properties of asphalt concrete materials for airfield pavement applications", Ph.D., University of Kansas.
  9. Bazzaz, M., et al. (2018), "A straightforward procedure to characterize nonlinear viscoelastic response of asphalt concrete at high temperatures", Transportation research record. Transportation Research Board 96th Annual Meeting, 2672, 481-492.
  10. Chad, Y.B. (2010), "Strength carbonation and permeability studies on wollastonite Added concrete, M.Tech thesis", Malaviya National Institute of technology (MNIT) Jaipur, India.
  11. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019). Behavior of steel storage pallet racking connection-A review.
  12. Daie, M., Jalali, A., Suhatril, M. Shariati, M., Arabnejad Khanouki, M.M., Shariati, A. and Kazemi-Arbat, P. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050.
  13. Davoodnabi, S.M., et al. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Srtuct., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.
  14. Gerami, M., et al. (2008), "Retrofit of reinforced concrete frame with steel bracing system", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran, 14, 1-17.
  15. Ghassemieh, M. and Bahadori, A. (2015), "Seismic evaluation of a steel moment frame with cover plate connection considering flexibility by component method", Proceedings of the 2015 world congress on Advances in Structural Engineering and Mechanics, Incheon, Korea.
  16. Hamidian, M., et al. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266.
  17. Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium", Struct. Eng. Mech., 66(6), 737-748. https://doi.org/10.12989/sem.2018.66.6.737.
  18. Ho-Huu, V., et al. (2018), "An efficient procedure for lightweight optimal design of composite laminated beams", Steel Compos. Srtuct., 27(3), 297-310. https://doi.org/10.12989/scs.2018.27.3.297.
  19. Hosseinpour, E., et al. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Srtuct., 26(4), 485-499. https://doi.org/10.12989/scs.2018.26.4.485.
  20. Ismail, M., Shariati, M., Abdul Awal, A.S.M., Chiong, C.E., Sadeghipour Chahnasir, E., Porbar, A., Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681.
  21. Jalali, A., Daie, M., Nazhadan, S.V.M., Kazemi-Arbat, P. and Shariati, M. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072.
  22. Kalla, P., et al. (2015), "Durability studies on concrete containing wollastonite", J. Cleaner Production, 87, 726-734. https://doi.org/10.1016/j.jclepro.2014.10.038
  23. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.T.. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Engineering with Computers, 1-20.
  24. Kazerani, S., Fanaie, N. and Soroushnia, S. (2014), "Seismic behavior of drilled beam section in moment connections", Numer. Method. Civil Eng., 1(2), 21-28.
  25. Khanouki, M.M.A., et al. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. https://doi.org/10.1016/j.jcsr.2016.01.002.
  26. Kheyroddin, A.B., et al. (2008a), "High performance and special concrete", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran.
  27. Kheyroddin, A.K. et al. (2008b), "Application of post tensioning in concrete slab", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran.
  28. Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M. (2017), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. https://doi.org/10.12989/eas.2017.13.6.531.
  29. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M. (2017), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259.
  30. Khorramian, K., et al. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067.
  31. Khorramian, K., et al. (2015), "Behavior of tilted angle shear connectors", PLoS ONE, 10(12), 1-11. https://doi.org/10.1371/journal.pone.0144288.
  32. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2016), "Behavior of tilted angle shear connectors (vol 10, e0144288, 2015)", PloS one, 11(2).
  33. Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207.
  34. Low, N.M. and Beaudoin, J.J. (1993a), "The effect of wollastonite micro-fibre aspect ratio on reinforcement of Portland cementbased binders", Cement Concrete Res., 23(6), 1467-1479. https://doi.org/10.1016/0008-8846(93)90083-L.
  35. Low, N.M. and Beaudoin, J.J. (1993b), "Flexural strength and microstructure of cement binders reinforced with wollastonite micro-fibres", Cement Concrete Res., 23(4), 905-916. https://doi.org/10.1016/0008-8846(93)90044-A.
  36. Low, N.M. and Beaudoin, J.J. (1994), "Mechanical properties and microstructure of high alumina cement-based binders reinforced with natural wollastonite micro-fibres", Cement Concrete Res., 24(4), 650-660. https://doi.org/10.1016/0008-8846(94)90189-9.
  37. Luo, Z., et al. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., 30(3), 271-280. https://doi.org/10.12989/scs.2019.30.3.271.
  38. Mathur, R., et al. (2007a), Marble slurry dust and wollastoniteinert mineral admixture for cement concrete.
  39. Mathur, R., et al. (2007b), Influence of wollastonite on mechanical properties of concrete.
  40. McKenney, C.J., et al. (1999), Surface treated additive for portland cement concrete, Google Patents.
  41. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A: Stat. Mech. Appl., 121169.
  42. Mohammadhassani, M., et al. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014.
  43. Mohammadhassani, M., et al. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., 14(5), 785-809. http://dx.doi.org/10.12989/sss.2014.14.5.785.
  44. Mohammadhassani, M., et al. (2014c), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. http://dx.doi.org/10.12989/sem.2013.48.6.833.
  45. Nagataki, S., et al. (2004), "Assessment of recycling process induced damage sensitivity of recycled concrete aggregates", Cement Concrete Res., 34(6), 965-971. https://doi.org/10.1016/j.cemconres.2003.11.008.
  46. Najarkolaie, K.F., Mohammadi, M. and Fanaie, N. (2017), "Realistic behavior of infilled steel frames in seismic events: experimental and analytical study", Bull. Earthqu. Eng.,15(12), 5365-5392. https://doi.org/10.1007/s10518-017-0173-z
  47. Nasrollahi, S., et al. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., 27(5), 537-543. https://doi.org/10.12989/scs.2018.27.5.537.
  48. nejad, I. P. B. D. m. (Fall 2003), Concrete mixing technology 6th.
  49. Nguyen-Sy, T., et al. (2017), "A multi-scale homogenization approach for the effective thermal conductivity of dry lime-hemp concrete", J. Build. Perform. Simul., 11(2), 179-189. https://doi.org/10.1080/19401493.2017.1323009.
  50. Nikonova, N., et al. (2003), "Wollastonite in silicate matrices", Glass Ceram., 60(9-10), 342-346. https://doi.org/10.1023/B:GLAC.0000008241.84600.f9
  51. Nosrati, A., et al. (2018a), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425.
  52. Nosrati, A., et al. (2018b), "Structure of Portland cement and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425
  53. Pratik, D., Viramgama, S.R.V. and Parikh, K.B. (2016), "Effect of ceramic waste powder in self compacting concrete properties: A critical review", IOSR J. Mech. Civil Eng., 13(1), 6.
  54. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., 30(5), 417-432. https://doi.org/10.12989/scs.2019.30.5.417.
  55. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Moghimi Azar, V., Toghroli, A., Safa, M., Tonnizam Mohamad, E., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335.
  56. Shah, S., Ramli Sulong, N.H., Shariati, M. and Jumaat, M.Z. (2015), "Steel rack connections: identification of most influential factors and a comparison of stiffness design methods", PloS one, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422
  57. Shah, S., Ramli Sulong, N.H., Shariati, M., Khan, R. and Jumaat, M. (2016), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin-Walled Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021
  58. Shahabi, S., Ramli Sulong, N.H., Shariati, M. and Shah, S. (2016), "Performance of shear connectors at elevated temperatures-A review", Steel Compos, Struct, 20(1), 185-203. http://dx.doi.org/10.12989/scs.2016.20.1.185.
  59. Shao, Z., Wakil, K., Usak, M., Amin Heidari, M., Wang, B. and Simoes, R. (2018), "Kriging Empirical Mode Decomposition via support vector machine learning technique for autonomous operation diagnosing of CHP in microgrid", Appl. Therm. Eng., 145, 58-70 https://doi.org/10.1016/j.applthermaleng.2018.09.028
  60. Shao, Z. and Vesel, A. (2015), "Modeling the packing coloring problem of graphs", Appl. Math. Model., 39(13), 3588-3595. https://doi.org/10.1016/j.apm.2014.11.060
  61. Shao, Z., Gholamalizadeh, E., Boghosian, A., Askarian, B. and Liu, Z. (2019). "The chiller's electricity consumption simulation by considering the demand response program in power system." Appl. Therm. Eng.,149, 1114-1124. https://doi.org/10.1016/j.applthermaleng.2018.12.121
  62. Shahabi, S., et al. (2016), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., 20(3), 651-669. http://dx.doi.org/10.12989/scs.2016.20.3.651.
  63. Sharbatdar, M.K.B., Mohammad; Kashiha, Nazanin; Andalib, Zahra (2008), "Behavior of fiber concrete under impact and explosive load", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran.
  64. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. https://doi.org/10.12989/scs.2018.29.2.243
  65. Shariati, A. (2014), Behaviour of C-shaped Angle Shear Connectors in High Strength Concrete. M.SC, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  66. Shariati, A., et al. (2012a), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831.
  67. Shariati, A., et al. (2014a), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. https://doi.org/10.1016/j.conbuildmat.2013.11.036
  68. Shariati, M. (2008), Assessment of Building Using Nonedestructive Test Techniques (ultra Sonic Pulse Velocity and Schmidt Rebound Hammer), Universiti Putra Malaysia.
  69. Shariati, M. (2013), Behaviour of C-shaped Shear Connectors in Stell Concrete Composite Beams, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  70. Shariati, M., et al. (2012b), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Proceedings of the 5th International Conference on Engineering Failure Analysis, 1-4 July 2012, Hilton Hotel, The Hague, The Netherlands.
  71. Shariati, M., et al. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures, 21 - 23 July, 2010, Sydney, Australia.
  72. Shariati, M., et al. (2012c), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Design, 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008.
  73. Shariati, M., et al. (2011a), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Scientific Res. Essays, 6(4), 977-983. DOI: 10.5897/SRE10.1120.
  74. Shariati, M., et al. (2011b), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+), Seoul, South Korea.
  75. Shariati, M., et al. (2015), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 1-18.
  76. Shariati, M., et al. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.
  77. Shariati, M., et al. (2011c), "Behavior of channel shear connectors in normal and light weight aggregate concrete (Experimental and Analytical Study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303.
  78. Shariati, M., et al. (2012d), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Design, 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039.
  79. Shariati, M., et al. (2014b), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017.
  80. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S., Jalali, A., Abdullahi, M.a.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014
  81. Shariati, M., et al. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland.
  82. Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427.
  83. Shima, H., et al. (2005), "An advanced concrete recycling technology and its applicability assessment through inputoutput analysis", J. Adv. Concrete Technol., 3(1), 53-67. https://doi.org/10.3151/jact.3.53.
  84. Shi, X., Hassanzadeh-Aghdam, M.K. and Ansari, R. (2019), "Viscoelastic analysis of silica nanoparticle-polymer nanocomposites", Compos. Part B: Eng., 158, 169-178. https://doi.org/10.1016/j.compositesb.2018.09.084
  85. Shi, X., Jaryani, P., Amiri, A., Rahimi, A. and Malekshah, E.H. (2019), "Heat transfer and nanofluid flow of free convection in a quarter cylinder channel considering nanoparticle shape effect", Powder Technology, 346, 160-170. https://doi.org/10.1016/j.powtec.2018.12.071
  86. Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579.
  87. Soliman, A. and Nehdi, M. (2014), "Effects of shrinkage reducing admixture and wollastonite microfiber on early-age behavior of ultra-high performance concrete", Cement Concrete Compos., 46, 81-89. https://doi.org/10.1016/j.cemconcomp.2013.11.008.
  88. Suhatril, M., Osman, N., Sari, P.A., Shariati, M. and Marto, A. "Significance of Surface Eco-Protection Techniques for Cohesive Soils Slope in Selangor, Malaysia", Geotechnical and Geological Engineering, 37(3, pp ), 2007-2014.
  89. Tahmasbi, F., S. Maleki, M. Shariati, N. H. Ramli Sulong and M. M. Tahir (2016). "Shear Capacity of C-Shaped and L-Shaped Angle Shear Connectors", PLoS One, 11(8), e0156989. https://doi.org/10.1371/journal.pone.0156989
  90. Toghroli, A., et al. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland.
  91. Toghroli, A., et al. (2018a), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., 22(4), 433-440. https://doi.org/10.12989/sss.2018.22.4.433.
  92. Trung, N.T., et al. (2019), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., 24(3): 415-425. https://doi.org/10.12989/sss.2019.24.3.415.
  93. Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639.
  94. Vo-Duy, T., et al. (2017), "A global numerical approach for lightweight design optimization of laminated composite plates subjected to frequency constraints", Compos. Struct., 159, 646-655. https://doi.org/10.1016/j.compstruct.2016.09.059.
  95. Vo-Duy, T., et al. (2015), "Damage assessment of laminated composite beam structures using damage locating vector (DLV) method", Front. Struct. Civil Eng., 9(4), 457-465. https://doi.org/10.1007/s11709-015-0303-0
  96. Winter, M. and Henderson, C. (2003), "Estimates of the quantities of recycled aggregates in Scotland", Eng. Geol., 70(3-4), 205-215. https://doi.org/10.1016/S0013-7952(03)00090-5.
  97. Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M.M., Tahir, M.M. and Khorami, M. (2018). "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., 27(3), 389-399. https://doi.org/10.12989/scs.2018.27.3.389.
  98. Xie, Q., et al. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., 30(5), 433-441. https://doi.org/10.12989/scs.2019.30.5.433.
  99. Xu, C., et al. (2019), "Using genetic algorithms method for the paramount design of reinforced concrete structures", Struct. Eng. Mech., 71(5), 503-513. https://doi.org/10.12989/sem.2019.71.5.503.
  100. Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D., Toghroli, A., Hashemi, M.H., Sedghi, Y. and Wakil, K. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., 28(4), 439-447. https://doi.org/10.12989/scs.2018.28.4.439.
  101. Ziaei-Nia, A., et al. (2018a), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067.

피인용 문헌

  1. Ionic liquid coated magnetic core/shell CoFe2O4@SiO2 nanoparticles for the separation/analysis of trace gold in water sample vol.10, pp.3, 2019, https://doi.org/10.12989/anr.2021.10.3.295
  2. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  3. Analyzing the energy performance of buildings by neuro-fuzzy logic based on different factors vol.23, pp.12, 2019, https://doi.org/10.1007/s10668-021-01382-4